← VBar NEO/EVO VLink

Re: Mini vbar software

VBar › VBar NEO/EVO VLink · Started by johnahamelv on 23 November 2019 20:1323.11.2019 20:13
johnahamelv 23 November 2019 20:1323.11.2019 20:13
I have a miniVBar I purchased used. It supposedly has the firmware 6.0 Express installed. I connected a VBar Control RX-sat to it. I powered up the unit via the CH2 port with a 2S LiPo. The "V" blinks slowly in orange color. When I tap on the "Bind To" prompt on my VBar Control Touch radio, the radio does not recognize the miniVBar. I don't know what I am doing wrong. Should I be connecting a bind plug to the miniVBar in one of the ports?
RV 24 November 2019 22:3224.11.2019 22:32
There is no V6 Express for old devices.

Please do a recovery to get the serial number (see old V5 archive videos) with the V5 pc software if not known or post the SN if known here for a check.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless