52283john
30 September 2026 00:2630.09.2026 00:26
I experienced a sudden loss of motor power toward the end of my flight, which resulted in some damage to my helicopter. I'm hoping someone could help me figure out what caused this issue. Looking at the flight log, I don't notice a clear OWB failure, and when I tested the OWB on the bench, I couldn't get it to slip at all. I'd really appreciate any guidance you could offer. The incident occurred on my EVO (S/N 27008050) during flight 26.09.2026 16:09:59.
Regards,
John Anderson
RV
30 September 2026 08:1930.09.2026 08:19
Hmmm ... hard to tell .. but at the very last data points of your own log I can see the following:
After a full negative collective input (0%, 1901 1/min, 166A, 43V) we have a full collective input (100%, 2018 1/min, 16A, 47V).
If this was a simple overspeed / autorotation landing it will be ok from the data. If it was your issue - it probably points to something slipping between motor shaft and rotor.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
2 mal bearbeitet. Zuletzt am 30.09.2026 08:20 von RV.
Hmmm ... hard to tell .. but at the very last data points of your own log i can see the following:
After a full negative collective input (0%, 1901 1/min, 166A, 43V) we have a full collective input (100%, 2018 1/min, 16A, 47V).
If this was a simple overspeed / autorotation landing it will be ok from the data. If it was your issue - it probably points to something slipping between motor shaft and rotor.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
2 mal bearbeitet. Zuletzt am 30.09.2026 08:20 von RV.
52283john
30 September 2026 11:5330.09.2026 11:53
Thanks so much for checking this out!
I was inverted when the motor suddenly stopped, so I tried to complete the rotation and execute an autorotation landing. Since I hadn't mastered autorotation landings in the simulator, this was actually my first real-world attempt. I aimed for roughly a 45-degree descent angle and tried to level out just before touching down. When I gave it full collective pitch at the end for the landing I had very little lift.
Regards,
John Anderson
RV
30 September 2026 13:2930.09.2026 13:29
Hello John,
okay - this explains the last data rows of the logs. So - unfortunately - no hint here what happened as the helicopter lost power.
Does the ESC probably have an internal log too?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Hello John,
okay - this explains the last data rows of the logs. So - unfortunately - no hint here what happened as the heli lost power.
Does the ESC probably have a internal log too?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
52283john
30 September 2026 14:1230.09.2026 14:12
I have the Hobbywing 180A V5 ESC. I don't believe I can access any flight data since I unplugged the battery after the crash. I did check the ESC before unplugging the battery and didn't see any error lights.
I also powered up the ESC after the crash and saw it go through the initialization sequence and spool up the motor on my workbench. I didn't notice any issues with the motor running without the blades.
Regards,
John Anderson
1 mal bearbeitet. Zuletzt am 30.09.2026 14:13 von 52283john.
RV
4 October 2026 22:0404.10.2026 22:04
One thing ... please also update to the current version, this gives us a bit more info in the logs ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
One thing ... please also update to the current version, this gives us a bit more info in the logs ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.