← VBar NEO/EVO VLink

EVO master/slave interbus BEC voltages? translated

VBar › VBar NEO/EVO VLink · Started by Chriss on 30 June 2026 21:3830.06.2026 21:38
Chriss 30 June 2026 21:3830.06.2026 21:38
Hello,

With a Master/Slave configuration, is it possible to use two BECs via AUX3 to AUX3 (interbus)?

The master is connected to the controller's BEC and is supplied with 8V by the controller's BEC.
Slave is only connected to AUX3 and receives, for example, another BEC voltage of 8V via AUX2.
But that is generated by a separate BEC.

Is that okay?

Thank you very much

Kind regards
machine-translated from German · Show original
RV 30 June 2026 23:1130.06.2026 23:11
Yes - that works, just disconnect the two positive leads from the master to the slave.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Chriss 1 July 2026 05:2401.07.2026 05:24
Hello Rainer,

Thanks for the info.


Which two positive leads do you mean?


I only have the Interbus line from the master to the slave.

For the master I have the BEC from the ESC and for the slave I have the BEC from an external BEC (not from the ESC).


Thank you, kind regards
machine-translated from German · Show original
RV 1 July 2026 06:3701.07.2026 06:37
Okay, with EVO Interbus only one then.

There simply cannot be a positive connection between master and slave if you want to use a separate BEC for each "output point" and the servos connected to it.

However:

This approach also introduces two potential points of failure, each of which could lead to data loss (depending on what's connected to the slave device). Therefore, it might be better to use just one high-power power source and supplement it with power backups.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 01.07.2026 06:39 von RV.
machine-translated from German · Show original
Chriss 2 July 2026 21:4202.07.2026 21:42
Hello Rainer,


Thanks for the tips.

Why would there be an error? If there's no hardware connected to the slave that's responsible for flying, nothing can happen except maybe the landing light or the lights failing.
If the BEC that powers the slave fails, only the light goes out.
Or


Kind regards
machine-translated from German · Show original
RV 2 July 2026 23:0902.07.2026 23:09
Quote: (Depending on what's attached to the slave)


regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Fingolf 3 July 2026 01:3703.07.2026 01:37
If nothing important is at stake, why bother with a
2. BEC? That doesn't make any sense then.

Stephan
machine-translated from German · Show original
Dirtygeri 3 July 2026 07:2803.07.2026 07:28
Hi Chriss!

We in Austria would call that a "botched job"... in my opinion, either connect everything to a BEC and secure it with power backup = perfect, or if you absolutely want to split it, then use an EVO and a second receiver, then you have two separate systems... whatever you need that for... I would definitely recommend option 1, as option 2 was only "invented" or designed for special uses like steerable glider launch trolleys, detachable external loads for scale helicopters, etc.!
machine-translated from German · Show original
Eddi E. aus G. 3 July 2026 08:5103.07.2026 08:51
Thoughts ...

Another thing that needs to be installed, flies along, and can fail.
The second receiver is also gone.
It might make sense if you need to operate LV and HV devices, but then a regulator or a direct power supply for the components actually seems smarter than compromising redundancy.

If nothing critical is connected to the extender, and there are no large power consumers, the bus cable may suffice.
Otherwise, as with master-slave, simply connect a second one (only +/–) over, or split it from the power source and buffer and run at least two cables to both.

Initial question answered: it is possible if you disconnect the positive wire between the two.
Question of meaning raised :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Chriss 3 July 2026 23:4703.07.2026 23:47
Hello, thanks for the tips first of all.

The whole point of this action is that the slave unit only has special functions, but there are many of them, and I want to move them away from the BEC of the controller.

1. Light module 14 LEDs
2. Sound module
3. NF-2x40 watt audio amplifier
4. 2 servos radar sphere
5. 2 Servos Borkanone
6.1 Servo landing light
7. Arduino Board
8. 3x Micro LED Gun.

I think that should be specifically addressed to a BEC.

What does the EVO actually do if the Interbus line fails during flight? Does it issue an active warning/error message because two antennas also fail?

Kind regards
machine-translated from German · Show original
RV 4 July 2026 21:0704.07.2026 21:07
As far as I know, nothing comes of it. But you could easily try it out on the workbench ;-)

The strongest of the available antennas is always used. If the slave antennas are no longer available, then the two antennas from the master are used.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless