Hello everyone,
A question regarding the conversion or adjustment of the maneuverability/turning rates in VBar (Ulli can probably answer this best).
I want to tune my helicopters (all 700-size helicopters) and the simulator (Heli-X) as similarly as possible, so that both feel comparable at the same RPM.
My target values would be:
Bank 1 (2000 RPM): 305°/s pitch & roll | 565°/s stern
Bank 2 (2200 RPM): 340°/s pitch & roll | 630°/s stern
Bank 3 (2200 RPM): 375°/s pitch & roll | 660°/s tail
My specific question is: What maneuverability setting would I need to choose in VBar to achieve approximately these rotation rates?
I know I could determine this experimentally, for example by filming the helicopter and measuring how long a full rotation takes. Alternatively, I could take my laptop to the field and directly compare the real helicopter with the simulator. But before I go to all that trouble, I thought I'd just ask you guys directly :-)
Thanks in advance.
Regards, Kilian
A question regarding the conversion or adjustment of the maneuverability/turning rates in VBar (Ulli can probably answer this best).
I want to tune my helicopters (all 700-size helicopters) and the simulator (Heli-X) as similarly as possible, so that both feel comparable at the same RPM.
My target values would be:
Bank 1 (2000 RPM): 305°/s pitch & roll | 565°/s stern
Bank 2 (2200 RPM): 340°/s pitch & roll | 630°/s stern
Bank 3 (2200 RPM): 375°/s pitch & roll | 660°/s tail
My specific question is: What maneuverability setting would I need to choose in VBar to achieve approximately these rotation rates?
I know I could determine this experimentally, for example by filming the helicopter and measuring how long a full rotation takes. Alternatively, I could take my laptop to the field and directly compare the real helicopter with the simulator. But before I go to all that trouble, I thought I'd just ask you guys directly :-)
Thanks in advance.
Regards, Kilian
Hallo zusammen,
eine Frage zur Umrechnung bzw. Abstimmung der Wendigkeit/Drehraten im VStabi (das kann Ulli wahrscheinlich am besten beantworten).
Ich möchte meine Helis (alles 700er Helis) und den Simulator (Heli-X) möglichst gleich abstimmen, sodass sich beides bei gleicher Drehzahl vergleichbar anfühlt.
Meine Zielwerte wären:
Bank 1 (2000 RPM): 305°/s Nick & Roll | 565°/s Heck
Bank 2 (2200 RPM): 340°/s Nick & Roll | 630°/s Heck
Bank 3 (2200 RPM): 375°/s Nick & Roll | 660°/s Heck
Meine konkrete Frage: Welche Wendigkeit müsste ich dafür im VStabi jeweils wählen, damit ich ungefähr auf diese Drehraten komme?
Mir ist klar, dass ich das auch experimentell ermitteln könnte, zum Beispiel indem ich den Heli filme und messe, wie lange eine volle Rotation dauert. Alternativ könnte ich auch den Laptop mit an den Platz nehmen und den echten Heli direkt mit dem Simulator vergleichen. Bevor ich aber den ganzen Aufwand betreibe, dachte ich, ich frage einfach mal direkt bei euch nach :-)
Danke im Voraus.
Gruß Kilian
eine Frage zur Umrechnung bzw. Abstimmung der Wendigkeit/Drehraten im VStabi (das kann Ulli wahrscheinlich am besten beantworten).
Ich möchte meine Helis (alles 700er Helis) und den Simulator (Heli-X) möglichst gleich abstimmen, sodass sich beides bei gleicher Drehzahl vergleichbar anfühlt.
Meine Zielwerte wären:
Bank 1 (2000 RPM): 305°/s Nick & Roll | 565°/s Heck
Bank 2 (2200 RPM): 340°/s Nick & Roll | 630°/s Heck
Bank 3 (2200 RPM): 375°/s Nick & Roll | 660°/s Heck
Meine konkrete Frage: Welche Wendigkeit müsste ich dafür im VStabi jeweils wählen, damit ich ungefähr auf diese Drehraten komme?
Mir ist klar, dass ich das auch experimentell ermitteln könnte, zum Beispiel indem ich den Heli filme und messe, wie lange eine volle Rotation dauert. Alternativ könnte ich auch den Laptop mit an den Platz nehmen und den echten Heli direkt mit dem Simulator vergleichen. Bevor ich aber den ganzen Aufwand betreibe, dachte ich, ich frage einfach mal direkt bei euch nach :-)
Danke im Voraus.
Gruß Kilian
machine-translated from German · Show original