← VBar NEO/EVO VLink

Tele 2 socket broken translated

VBar › VBar NEO/EVO VLink · Started by Falo on 2 October 2026 22:3502.10.2026 22:35
Falo 2 October 2026 22:3502.10.2026 22:35
Hello,

On one of my NEOs, the TELE-2 socket came loose and broke off at the solder joints, I suspect along with the circuit traces.
Is it perhaps (economically sensible) to repair this before you do?
I hope something can be seen in the pictures.

Greetings

Olaf

machine-translated from German · Show original
RV 3 October 2026 16:4303.10.2026 16:43
I suspect that the copper railway was also torn down.

Then it will be difficult, but let Eddi take a look at the picture on Monday.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 5 October 2026 10:3405.10.2026 10:34
Good morning,

Please remove the casing and then take a sharp, bright picture of the circuit trace where it is.

The +/– terminals could be 'stole' from somewhere else, the question is whether the signal line could be reliably soldered back on somewhere.
However, as long as all the necessary devices can be cascaded, a single TELE connection would suffice.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Falo 5 October 2026 12:3705.10.2026 12:37
Good morning,

That's just sorted itself out. I sold the stabilizer (also using this argument).
Thanks anyway.

Greetings

Olaf
machine-translated from German · Show original
Eddi E. aus G. 6 October 2026 09:0206.10.2026 09:02
8-) haha ... let's see when the new owner gets in touch ^^

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless