Falo
11 October 2026 22:4011.10.2026 22:40
Hello,
After setting up the Pro apps, I encountered two problems on one setup (Goblin 380 (EVO, YGE-65 LVT - latest firmware)):
1. The output RC voltage (~8.46V) is about 0.1 volts higher than the actual BEC voltage (~8.36V, set to 8.4V). The old VBar Control had a way to correct this. I can't find this option on the Touch. How can I fix this, or why is there such a large discrepancy?
2. In my own Data Log Pro, I want to display the BEC current. Even during setup (where live data is already displayed), it always shows 0.0A, despite significant movement of both sticks. The graph then shows 0.1A for the entire recording period. Everything is fine with my other two helicopters (YGE Saphir 155+NEO & Aureus 135+EVO).
Here are some pictures of both...
Greetings
Olaf
Hallo,
nach dem Einrichten der Pro-Apps habe ich an einem Setup (Goblin 380 (EVO, YGE-65 LVT - neueste Firmware)) 2 Problemchen:
1. die ausgegeben RC-Spannung (~8,46V) ist um ca. 0,1 Volt höher als die tats. BEC-Spannung (~8,36V, eingestellt auf 8,4V). An der alten VBar Control gab es die Möglichkeit dies zu korrigieren. In der Touch finde ich diese Möglichkeit nicht. Wie kann ich das beheben bzw. warum habe ich hier eine so große Abweichung?
2. im eigenen Datenlog Pro möchte ich mir den BEC-Strom ausgeben lassen. Schon beim Einrichten (hier werden ja bereits Live-Daten angezeigt) steht immer 0,0A, obwohl ich stark an beiden Knüppel gerührt habe. In der Grafik steht dann für die gesamte Aufzeichnungsdauer 0,1A. Bei meinen beiden anderen Helis (YGE Saphir 155+NEO & Aureus 135+EVO) ist alles in Ordnung.
Zu beidem einige Bilder ...
Grüße
Olaf
RV
11 October 2026 23:0511.10.2026 23:05
Well, the voltage reading might have some tolerance. If it's 0.1V out of 8.4V, that's a tolerance of just over 1% – which is very good considering it's not a calibrated precision instrument.
With older stabilizers, we had a parameter in the stabilizer that could be corrected because the readings from the 2s servos differed too much, as the measuring device was originally designed for 6V.
For NEO/EVO with VBC touch/EVO, this is accurate enough for our purposes with the aforementioned tolerance.
Because of BEC power - the "small" 65 can't do that, as far as I know, it simply doesn't transmit anything to us.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Naja - also die Spannungsanzeige kann ggf. etwas Toleranz haben. Wenn das 0,1V von 8,4V ist - sind wir bei gut 1% Toleranz - das ist schon mal sehr gut dafür dass das kein kalibriertes Präzisionsinstrument ist.
Bei Altstabis hatten wir das mal korrigierbar in einem Parameter in der Stabi hinterlegt weil diese als 2s Servos herauskamen zu stark differierten da diese Messeinrichtung damals eigentlich für 6V abgestimmt war.
Bei NEO/EVO mit VBC touch/EVO ist das für unsere Zwecke genau genug mit der o.g. Toleranz.
Wegen BEC Strom - der "kleine" 65er kann das m.W. nach nicht, er übermittelt uns da einfach nichts.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G.
12 October 2026 09:0912.10.2026 09:09
Good morning,
Just out of curiosity, what happens when you measure at the BEC with nothing else connected, only the flight battery?
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
nur mal aus Neugier, wie ist es, wenn man am BEC misst, wenn nix (nix!) sonst angeschlossen ist, nur der Flug-Akku?
Grüßle
Eddi
Born to fly ...
forced to work.
Falo
12 October 2026 14:5612.10.2026 14:56
So it's 8.38V!
Also es sind 8.38V!
Eddi E. aus G.
13 October 2026 09:1013.10.2026 09:10
8.45/8.38*100=100.835
8.38/8.45*100=99.172
Hi, depending on how you calculate it, but always less than 1% ... good enough.
Rainer had also raised the heretical question: Is the multimeter calibrated?
:-)
I just compared the lab power supply and multimeter here, 8.42 V to 8.39 V... both were probably calibrated when they were new (and probably weren't identical to the second decimal place even back then...), but that was a long time ago... also, good enough.
Before we start on that, Hobbywing could gladly 'find' a few hundred mAh per flight :-)
Grüßle
Eddi
Born to fly ...
forced to work.
8,45/8,38*100=100,835
8,38/8,45*100=99,172
Moin, je-nachdem wie man sich's rechnet, aber immer weniger als 1 % ... good enough.
Rainer hatte noch die ketzerische Frage in den Raum gestellt, ist das Multimeter auch kalibriert?
:-)
Ich hab hier grad mal das Labornetzteil und Multimeter hier daran verglichen, 8,42 V zu 8,39 V ... beides war vermutlich als es neu war mal kalibriert (und vermutlich schon damals nicht auf die 2. Nachkommastelle gleich ...), aber das ist schon lange her ... auch, good enough.
Bevor wir da anfangen, darf Hobbywing gern mal ein paar hundert mAh/Flug 'finden' :-)
Grüßle
Eddi
Born to fly ...
forced to work.
Falo
13 October 2026 11:0913.10.2026 11:09
It's all ok, :-)
I didn't want to make a fuss about it.
I probably should have left out the picture of the multimeter. 8-)
The YGE app shows yet another, even smaller value. And it works (better) on my other two helicopters (also with YGE).
Having so many (telemetry) values is both a blessing and a curse.
And in the old VBar there was the option of a correction factor, which I actually searched for in vain in the Touch version.
It's a shame it's no longer available. But maybe you'll put it back in sometime.
Alles gut, :-)
wollte ja hier so kein Faß aufmachen.
Das Bild vom Multimeter hätte ich wohl besser weggelassen. 8-)
In der YGE-App ist ja noch mal ein anderer, noch kleinerer Wert. und bei meinen beiden anderen Helis (auch mit YGE) passt's halt (besser).
Ist halt Fluch und Segen mit so vielen (Telemetrie)Werten.
Und in der alten VBar gab's halt die Möglichkeit mit dem Korrekturfaktor, den habe ich EIGENTLICH in der Touch vergebens gesucht.
Wenn nicht mehr da, schade halt. Aber vlt. macht ihrs ja dann noch mal rein.
Eddi E. aus G.
13 October 2026 11:3313.10.2026 11:33
No, everything's fine, we all learn from things like this. And... nice multimeter :-) all good!
With the older VBars, the measurement variation was significantly larger (actually good enough, but ...), so it made sense, especially if you wanted to fly with a receiver battery and warning system 'as was common practice in the past'.
Here, exactly enough :-) and with a BEC that only helps to a limited extent anyway, I don't see the very short sharp spikes in the relatively slow and smoothed display anyway, and the BEC doesn't decrease as the battery gets emptier, but rather it just does, ... doesn't do (anymore).
And if that fails, hopefully I have a buffer or backup battery or power backup (which reports itself), and if I really need it, I've set a trigger to a lower voltage.
—Eddi
Born to fly ...
forced to work.
Nee, alles gut, anhand von sowas lernen wir ja alle. Und ... schönes Multimeter :-) alles gut!
Bei den älteren VStabis war die Streuung bei der Messung halt deutlich größer (eigentlich auch gut genug, aber ...), da hat das schon Sinn ergeben, vor allem, wenn man 'wie früher üblich' ggfs. mit Empfängerakku und Warnung fliegen wollte.
Hier, genau genug :-) und bei 'nem BEC hilft das sowieso nur bedingt, die ganz kurzen spitzen Spikes sehe ich in der relativ langsamen und geglätteten Darstellung da sowieso nicht, und das BEC baut ja auch nicht mit leerer werdendem Akku ab, sondern eher so, tut, ... tut nicht (mehr).
Und wenn das ausfällt, habe ich hoffentlich 'n Puffer oder Stützakku oder Power Backup (was ja von selbst meldet) drin, und mir wenn ich's wirklich brauche noch einen Trigger auf eine niedrigere Spannung gesetzt.
—Eddi
Born to fly ...
forced to work.
Falo
13 October 2026 12:3013.10.2026 12:30
:-) Yes, and that's exactly the reason for this whole story.
I had a low voltage warning on my 700 (from the YGE) and then I checked the log: > Message from VBackup (186 mAh consumed). That seemed a bit high to me.
Therefore, I simply wanted to log the BEC voltage curve (for all helicopters at once)...
But I do have one more question about VBackup, even though it doesn't quite fit here.
Under "Advanced Settings > Standby Voltage > Alarm Threshold" you can't actually adjust anything, can you?
The help text suggests otherwise, but I think the appropriate values are automatically selected. In my case, the fields/buttons are definitely non-functional.
:-) Ja, und genau das ist der Grund für die ganze Geschichte hier.
Hatte auf meinem 700er eine Unterspannungswarnung (also vom YGE) und hab dann auch mal ins Log geschaut: > Meldung vom VBackup (186 mAh verbraucht). Kam mir doch etwas viel vor.
Daher wollte ich einfach auch mal den Verlauf der BEC-Spannung (dann gleich bei allen Helis) loggen ...
Aber da hätte ich dann doch noch eine Frage zum VBackup, auch wenn die hier nicht ganz rein passt.
Bei den "Erweiterten Einstellungen > Bereitschaft Spannung > Alarmschwelle" kann man tatsächlich nichts einstellen, oder?
Der Hilfetext suggeriert das zwar aber ich denke, die passenden Werte werden automatisch gezogen. Bei mir sind die Felder/Tasten auf jeden Fall ohne Funktion.
RV
13 October 2026 17:5013.10.2026 17:50
The buttons are one-shot – they send the signal, but you can't see what's currently set.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Die Tasten sind One-Shot - sie senden, Du siehts aber nicht was gerade eingestellt ist.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
flydown
13 October 2026 21:1313.10.2026 21:13
Eddi E. from G. wrote:
-------------------------------------------------------
Before we start there, Hobbywing is welcome to have a
> Find a few hundred mAh per flight :-)
>
> Greetings
>
> Eddie
That was good.
I have something new on this topic, but it's nothing helpful. Should I? There then.
Greetings, Uwe
Eddi E. aus G. Wrote:
-------------------------------------------------------
> Bevor wir da anfangen, darf Hobbywing gern mal ein
> paar hundert mAh/Flug 'finden' :-)
>
> Grüßle
>
> Eddi
Der war gut.
Hab zu dem Thema auch was neues, aber nichts, das hilft. Soll ich? Dort dann.
Grüße Uwe
Eddi E. aus G.
14 October 2026 09:2714.10.2026 09:27
Hi Uwe,
Feel free :-) Good entertainment shouldn't be neglected either ^^
Of course, always, as long as it remains objective ;-)
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Uwe,
fühl Dich frei :-) gute Unterhaltung soll ja auch nicht zu kurz kommen ^^
Natürlich immer, solange es der Spur nach sachlich bleibt ;-)
Grüßle
Eddi
Born to fly ...
forced to work.