← VBar Control Touch / EVO

Vbar control EVO charging translated

VBar Control › VBar Control Touch / EVO · Started by sinako on 3 June 2026 10:5603.06.2026 10:56
sinako 3 June 2026 10:5603.06.2026 10:56
Hello, I have a VBar Control EVO remote control with a 14000 mAh battery. After a full day of charging, the remote only shows 85% charge. If I unplug and replug the charger, it charges to 100%. What could be causing this, or is it normal? The cable is original. Thanks for your help.
machine-translated from German · Show original
RV 3 June 2026 12:2003.06.2026 12:20
At what charge level did you connect it?
How long had it been charging until then?

Is that also the case if you infect them with, for example, 60%?

Generally, we stop at 100% and don't buffer again - so around 98% or so is fine when plugging in - but 85% could be a timeout, there's also a limit to the maximum loading time.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
sinako 3 June 2026 15:2903.06.2026 15:29
I plugged the device in when the battery was at 26%. It took about 8 hours to charge. I've never tried charging it from 60%. Is there a way to adjust the charging time? That could be the problem. Thanks.
machine-translated from German · Show original
RV 3 June 2026 20:0003.06.2026 20:00
No, that's fixed by the charging chip.

Try it out, it's just a guess on my part.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 4 June 2026 09:1604.06.2026 09:16
Good morning,

That actually depends on the power supply and the battery.

For example, a 5W power supply and a 50.4Wh 14,000mAh battery would take over 10 hours to charge from empty to full, if it weren't for charging losses and CC/CV charging.
10, 5, 15, 3.5 etc. ... it doesn't get any better than that, since the transmitter charges at a maximum of 15 W, under 'optimal' conditions.

If the world were linear, 5 W would pass through 40 Wh in 8 h, i.e. almost 80%, but in reality it will be less.

I don't worry about it, it charges when necessary (15% warning, then the transmitter starts complaining, which is annoying :-) ) or when I remember, and whether it's full or not, and in between, is relatively unimportant to me.

It's not like it's a 'big' football where the battery runs out after 1-1.5 hours...

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
sinako 4 June 2026 10:2404.06.2026 10:24
Thank you for your reply. Otherwise, it works perfectly.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless