ChrisB
8 May 2026 10:2808.05.2026 10:28
Hi
I scanned qr code on my new tx and it went to my account page here, I clicked register and the loaded apps appeared on the screen but now I have gone back into my account and the device is not there , have I done something wrong ?
Edited 1 time(s). Last edit at 05/08/2026 10:29AM by ChrisB.
Eddi E. aus G.
8 May 2026 10:5608.05.2026 10:56
Hi,
you seem to have a split personality :-) or in other words, two customer accounts.
One with the gmail-address (created in 2013 and in use at our shop web site until 2019), and one with an ntlworld-address (created in 2009 and in use at our shop web site until 2014).
Your transmitter is registered to the account with the gmail address ...
;-)
—Eddi
Born to fly ...
forced to work.
ChrisB
8 May 2026 12:3408.05.2026 12:34
Ok Eddi will have a look again, I log in here under the Gmail address but cannot see it I will log out and back in.
Also silly question , my original VBC touch got screen damage from screws when opening it up which was sent back to you to repair, I am soon opening this one, no issues now I assume I will be careful.????
ChrisB
8 May 2026 13:1808.05.2026 13:18
Sorry cannot see it still, apologise for the mixed accounts, can you move the registration over to this account I am using now?
My devices still showing nothing.
No panic, plenty of stuff to play with in meantime :-)
Edited 1 time(s). Last edit at 05/08/2026 01:19PM by ChrisB.
ChrisB
8 May 2026 13:5008.05.2026 13:50
Found it, sorry getting old :-)
Just clicked on my account, forgot to click admin/my devices :-)
Eddi E. aus G.
8 May 2026 13:5808.05.2026 13:58
Hi,
Quote:ChrisB
Also silly question , my original VBC touch got screen damage from screws when opening it up which was sent back to you to repair, I am soon opening this one, no issues now I assume I will be careful.????
Not likely. There was a time some years back when, on a limited number of VBar Control Touch, bolts 2 mm too long were used.
Not any more, and I'm pretty sure we got them all back then, too.
Still, please use a little dexterity when bolting things (it) back together, the other thing which may happen is, after 'tight' comes 'loose' ... :-)
—Eddi
Born to fly ...
forced to work.
ChrisB
8 May 2026 15:4708.05.2026 15:47
All internal stuff done.
Thanks