voetloos
5 July 2018 07:2605.07.2018 07:26
Good Morning,
I have a question regarding the compatibility of VBCt and VBC. If I have both,can I with binding use anat RX to fly any Heli/Plane ? OR are some functionality transferred to te neo that make the use of the VBC obsolete.
Thank you
Fingolf
5 July 2018 08:0105.07.2018 08:01
You can use VBCT and VBC both with the same model.
Stephan
Eddi E. aus G.
5 July 2018 08:5605.07.2018 08:56
Hi,
both radios are fully compatible, both for model sharing (bind and fly) and for buddy boxing.
The model memory is always in the VBar, remember?
Just the logs will be split, then, some on one radio and some on the other, but that can't be helped.
Kind regards
Eddi
Born to fly ...
forced to work.
voetloos
5 July 2018 10:3705.07.2018 10:37
Thank you. Makes life easier to fly VBC !
Vinger
5 July 2018 18:5405.07.2018 18:54
So batteries will have to be recreated for the VBCt then?
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
RV
5 July 2018 21:2505.07.2018 21:25
Nope - you can just copy the /battery folder completely to the touch.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Christo074
6 July 2018 17:1506.07.2018 17:15
So, all i have to do is just bind the new VbcT, and all my saved settings for each model is transferred to my new TX.. Thanks Chris
Fingolf
6 July 2018 17:3206.07.2018 17:32
ah no, the vbar settings are always stored in the vbar not in the transmitter....
But yes, bind and fly :-)
Stephan
Edited 1 time(s). Last edit at 07/06/2018 05:33PM by Fingolf.
Christo074
6 July 2018 18:2906.07.2018 18:29
So, with that said, then im going to have to actually set up my VBCT, (switches etc), before hand...
Vinger
6 July 2018 19:1906.07.2018 19:19
Yes exactly how you did it with the VBC. And need to load all the apps first as well.
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
Christo074
6 July 2018 20:2706.07.2018 20:27
Kool, thanks Vinger.. Ok, so one more question about the apps, so can i use the wifi feature, and if so do i have to still go through everything by going to the website and following up there, in order to retrieve my apps..?
Oh, one Q, after binding my new VBCT, do i have to redo my setup for my Kosmik 200..? Thanks
Edited 1 time(s). Last edit at 07/06/2018 08:30PM by Christo074.
Fingolf
6 July 2018 20:3906.07.2018 20:39
Eddi E. aus G.
9 July 2018 09:5509.07.2018 09:55
Hi,
_all the settings for the model_ are stored in the VBar, _only the settings for your radio_ are stored in the radio itself.
So if you bind an already set-up model, you do not have to make any changes or redo an ESC setup or similar.
But please do a pre-flight check and make sure everything works properly, this is also to re-check that you have done your switch assignments properly, in the beginning.
Kind regards
Eddi
Born to fly ...
forced to work.
Christo074
9 July 2018 19:1009.07.2018 19:10
Great..!! Thanks For all you help, im looking forward to seeing the VBCT..