← VBar Control Touch / EVO

Welcome at VBar Control Touch Forum

VBar Control › VBar Control Touch / EVO · Started by ulrich on 20 June 2018 19:1920.06.2018 19:19
ulrich 20 June 2018 19:1920.06.2018 19:19
All questions and comments to VBar Control Touch go into this section.

so long ... Uli
http://www.vstabi.de
rjvan 21 June 2018 17:3821.06.2018 17:38
Hi,
Is the screen surface glass or plastic? Do you recommend a screen protector?

Thanks
R.J.
ulrich 21 June 2018 17:5221.06.2018 17:52
its Glass.

The Surface is very scratch resistant, i dont thing a protector is needed at all. A Protector will decrease the brightness, and i think its much less resistant against scratches than the native surface.

so long ... Uli
http://www.vstabi.de
mahbouni 23 June 2018 09:3723.06.2018 09:37
Can you tell us more about the online features like the cloud functions and Android apps
ulrich 24 June 2018 12:4824.06.2018 12:48
The current Version supports Online Updates of all App, as well as installing/deinstalling Apps from the Store. This is similar to the Webstore, but on the radio itself, so no additional device needed to operate these functions. Additionally you can change firmware of your NEO´s without PC.
The Device already is prepared for the upcoming functions like i.e. showing you flights and batteries in the web. Therfore it can upload data like logfiles and statistics to the web. Currently the frontend is not available, but this will change in the future.
This interface allows even exchanging data with other radios. It will allow to upload i.e. Pics to the radio, or share Battery data with your friends. Many ideas exsist that will come to live in the next time.

so long ... Uli
http://www.vstabi.de
robertvizzo 26 June 2018 15:1826.06.2018 15:18
Is the english manual available online or for downloading? I would love to get a head start on learning about the radio before the USA release!!
Guillaume22 2 July 2018 19:2302.07.2018 19:23
Hello,

I just received my Vbar Control touch (my first Mikado radio) and my 5 vbar NEO Vlink (first module at Mikado also) and I have several questions:

-I tried to update my NEO directly from the radio but I do not see how to proceed? I had to use the SOFT to register the product and update it.

-In the options, I downloaded the image pack about Goblins but I do not see where we can affect the image of the goblin on the configuration?

Thank you in advance for your help.


Guillaume
RV 2 July 2018 20:0502.07.2018 20:05
Quote:-I tried to update my NEO directly from the radio but I do not see how to proceed? I had to use the SOFT to register the product and update it.

After registering them and one last Update through USB - they are prepared for upcoming Updates over the air (VBar Firmware Update App mandatory needed to be installed and WiFi connection active) ;-)

Quote:-In the options, I downloaded the image pack about Goblins but I do not see where we can affect the image of the goblin on the configuration?

You need the the Free design App at the Extension section - then long click on a screen with connected Model ...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Guillaume22 2 July 2018 20:3702.07.2018 20:37
I have installed the application "User Screens" but no way to configure a new screens, can you detail a little more the procedure to follow?
Currently my NEO is not in pro version (I'm waiting for my activation code) so maybe that's why I can not customize it?

I have another question about the switch that can turn off the engine, currently it is a three positions but I want to switch to an inter two positions.
Why are there 3 functions? (Run, Iddle and Off), what is the Iddle function? On my old Radio I used a two-position switch.
RV 2 July 2018 22:1202.07.2018 22:12
1 - did you try a log-term click on the model screen, e.g. near the icon bar?

2 - nope. We use 3-way only. Idle is a idle throttle for Autorotation training and faster recovery if needed.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Guillaume22 4 July 2018 11:5404.07.2018 11:54
RV Wrote:
-------------------------------------------------------
> 1 - did you try a log-term click on the model
> screen, e.g. near the icon bar?
>
> 2 - nope. We use 3-way only. Idle is a idle
> throttle for Autorotation training and faster
> recovery if needed.


For the first two points it works now.

I have another question regarding autotrim function, how does it work exactly?
If I check this function, then just take off and make a stationary for the module correctly corrects the helicopter?
Eddi E. aus G. 4 July 2018 12:0704.07.2018 12:07
Hi,

exactly. If on, the VBar will trim the helicopter if you do not interfere. So get it into a hover and let it drift, bring it back if you reach your comfort zone, start over. You will notice less and less drift. To check if it's OK, do a piro on the spot, the model should piro without wandering off.
Land, disable.
Do it on a calm day, wind may interfere.
And don't worry, the VBar will fly almost perfectly even without, you will mainly notice in hard load changes that there is less interaction (wobble) e.g. in a tic toc or rainbow.

Kind regards

Eddi

Born to fly ...
forced to work.
Fingolf 4 July 2018 12:4304.07.2018 12:43
Check the helping text.

Stephan
Guillaume22 4 July 2018 14:1404.07.2018 14:14
Fingolf Wrote:
-------------------------------------------------------
> Check the helping text.
>
> Stephan


Personally I did not know all modules and Mikado radios before today and I'm French so English is not my forte so I prefer to ask questions.
Eddi E. aus G. 4 July 2018 14:3004.07.2018 14:30
Hi again,

not a problem.

Kind regards

Eddi

Born to fly ...
forced to work.
Fingolf 4 July 2018 14:5204.07.2018 14:52
ah ok, no translation to french these days... :-)
Guillaume22 4 July 2018 15:3204.07.2018 15:32
Fingolf Wrote:
-------------------------------------------------------
> ah ok, no translation to french these days... :-)

There is a lot of French driver who does not go to Mikado because precisely the setting is in English.

Maybe one day French will be available, I hope.
Eddi E. aus G. 4 July 2018 15:3904.07.2018 15:39
Hi,

un ancien professeur à moi a toujours dit, il est bon de connaître le couple de dialectes en Europe, comme l'anglais, français, italien, espagnol etc. :-)

Non scholae sed vitae discimus ...

A bientôt

Eddi

Born to fly ...
forced to work.
RV 4 July 2018 17:2104.07.2018 17:21
:-/ :-/ :-/

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
MH 4 July 2018 23:5504.07.2018 23:55
Wenigstens den lateimischen Teil habe ich verstanden :-)
Ut desint vires tamen est laudanda voluntas!
Eddi E. aus G. 5 July 2018 08:5405.07.2018 08:54
:-)

Born to fly ...
forced to work.
mahbouni 8 July 2018 17:2108.07.2018 17:21
Flew with my VBCT for the first time today. Starting with a fully charged battery, from 9am until 1:30pm, and after 6 flights the battery is down to 66%.

Can I charge the battery at the field from a 12V source, such as a 3s LiPo and an appropriate connector cable, e.g. 3s 8000mAh?
RV 8 July 2018 19:3308.07.2018 19:33
Yes you can charge with 9-18 V input at the field!


Using a Lipo directly i would add a fuse in the cable.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G. 9 July 2018 10:0209.07.2018 10:02
Hi,

please bear in mind that we have a LiPo in the radio, and calculate the remaining capacity from the voltage of the battery, amongst other things.

Since a LiPo drops from 4.2x V / cell to nominal voltage of 3.8-3-7 V pretty quickly, in the beginning, the shown capacity will drop more quickly in the beginning, then it will be almost stable or only dropping slowly for quite some time.

I would recommend you use the radio and monitor the run time (with your particular display brightness and power-on times etc.) to get a feeling for how long it lasts. I would not even worry to fly until the battery alarm sounds, there's still plenty of juice in the battery, then.

But of course you can charge any time, from a battery, from a cigarette lighter jack in your car, whatever supplies the required voltage.

As a last resort, if it's switched off, it will even charge (slowly) from a power bank, if switched on you can at least buffer it from a power bank.

Kind regards

Eddi

Born to fly ...
forced to work.
Guillaume22 9 July 2018 16:0609.07.2018 16:06
Hello,

I have a problem with the timer, it does not work.

I tried everything but it does not warn me when the timer is over.

Are there any special options to tick?


VStabi VStabi Pioneer of Flybarless