Wiesel1005
30 October 2026 18:1730.10.2026 18:17
Hello folks,
I bought an old Raptor 50 V2 scale helicopter. It has the old flybar head with a 90° swashplate and 3 servos.
I'm using the Vstabi NEO Pro 6.4 as the receiver...
I've already connected everything. Roll, pitch, and yaw are working. My only problem is with the pitch; one servo isn't moving up...
Can someone help me? I'm almost at my wit's end.
lg
Gerald
Hallo Leute,
ich habe mir einen alten Raptor 50 V2 als Scale Heli gekauft. Er hat den alten Paddelkopf mit 90° Taumelscheibe und 3 Servos.
Als Empfänger verwende ich den Vstabi NEO Pro 6.4...
Ich hab bereits alles angeschlossen. Roll, Nick und Heck funktionieren bereits. Nur beim Pitch hab ich das Problem, dass ein Servo nicht mit rauf geht...
Kann mir jemand weiterhelfen? Ich verzweifle fast schon.
lg
Gerald
martin_fuerst
30 October 2026 19:3330.10.2026 19:33
Good bye,
Your Raptor usually has a mechanical swashplate mixing system installed in the model, meaning you need to select H-1 (Mechanical Swashplate Mixing) in the setup!
LG
Martin
Edited once. Last edited on 30.10.2026 at 19:33 by martin_fuerst.
Servus,
Dein Raptor hat üblicherweise eine mechanische Taumelscheibenmischung im Modell verbaut, d.h. du musst im Setup H-1 (Mechanische Taumelscheibenmischung) auswählen!
LG
Martin
1 mal bearbeitet. Zuletzt am 30.10.2026 19:33 von martin_fuerst.
RV
30 October 2026 21:2530.10.2026 21:25
If it's a conversion to a 90° eCCPM mix, please attach pictures of the helicopter. Also, please include a few screenshots from the VBC showing the TS mixer. Please also post the Expert settings (long-click TS selection).
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Sollte es ein Umbau auf eine 90° eCCPM Mischung sein - bitte Bilder des Helis mal anfügen. Ebenso ein paar Screenshots aus der VBC beiom TS Mischer. Dabei auch die Experts (Langklick TS Auswahl) mit posten.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Wiesel1005
31 October 2026 06:1931.10.2026 06:19
Thank you very much.
The information about H1 was helpful. I would never have figured that out.
It's already working perfectly.
Herzlichen Dank.
Die Info mit H1 war zielführend. Wär ich nie drauf gekommen.
Er läuft bereits einwandfrei.
martin_fuerst
31 October 2026 08:2831.10.2026 08:28
Very good, and please don't forget to set the head sensitivity to 0 when...
you leave the paddle head up.
LG
Martin
Sehr gut und bitte nicht vergessen die Kopfempfindlichkeit auf 0 zu stellen, wenn
du den Paddelkopf oben lässt.
LG
Martin