← VBar Control Touch / EVO

Loose connection potentiometer right translated

VBar Control › VBar Control Touch / EVO · Started by MiAB4us on 26 September 2026 00:2826.09.2026 00:28
MiAB4us 26 September 2026 00:2826.09.2026 00:28
Hello everyone – I haven't used the potentiometers for a long time. I recently assigned the telemetry announcement volume to my left potentiometer. I then discovered that my right potentiometer only goes 'louder or quieter'. Anything in between – when I experiment with the volume – only produces terrible scraping and squeaking noises. What can/should I do to fix this?
Thank you for your feedback...
Greetings - Bernhard
machine-translated from German · Show original
RV 26 September 2026 16:2926.09.2026 16:29
What does it look like during calibration? Does the bar move smoothly there, or does it also stutter?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
MiAB4us 27 September 2026 00:4227.09.2026 00:42
Hello Rainer
Great idea... - I'll take a look and get back to you.
Greetings, Bernhard
machine-translated from German · Show original
MiAB4us 27 September 2026 06:1527.09.2026 06:15
Yes…! The bar is flipping like crazy. Unless it's at 150 or 0… Then it's quiet.
Greetings - Bernhard



Edited once. Last edited on 27.09.2026 at 06:15 by MiAB4us.
machine-translated from German · Show original
RV 27 September 2026 11:5627.09.2026 11:56
Please do the following:

Open the transmitter (remove the back cover as you would for adjusting the sticks) and wiggle the cable connector a bit (both ends). It might just be a bad connection.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 28 September 2026 08:5628.09.2026 08:56
Good morning!

And... have you tried recalibrating? Resetting it, then turning it all the way to the left, all the way to the right?

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MiAB4us 28 September 2026 16:2028.09.2026 16:20
Yes Rainer - thanks, I'll give it a try.
machine-translated from German · Show original
MiAB4us 28 September 2026 16:2328.09.2026 16:23
Greetings Edi
Yeah, I did… Nothing - thanks
Greetings
machine-translated from German · Show original
MiAB4us 29 September 2026 02:2029.09.2026 02:20
Thank you so much for your support and tips…
Unfortunately, it's still only stable at 0 and 150. Otherwise, it just flickers back and forth…
Since I am unfortunately not very tech-savvy and the model helicopter specialist I trust is located not far from me - how about if someone would allow me to get professional support there?
Sending in the transmitter would deprive me of my daily dose of electrical charging of my flight-specific synapses for a long period of time (Switzerland / Germany - customs, etc.).
I would be happy…
Greetings - Bernhard
machine-translated from German · Show original
RV 29 September 2026 06:0029.09.2026 06:00
If you feel up to it:

- Unplug the io potentiometer
- pull off the cap of the io potentiometer
- unscrew it (there is a nut under the cap)
- plug it in instead of the nio
- test

This way, one could find out if sending a potentiometer would be sufficient.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 29 September 2026 10:1329.09.2026 10:13
Good morning,

Easier... because they're right next to each other... just swap the cables from the rotary encoder and the potentiometer.
They're both potentiometers, right? ^^

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MiAB4us 3 October 2026 01:0803.10.2026 01:08
Hi everyone

Okay - first I'll try Eddi's method, and then - if another swap is needed - I'll try Rainer's approach. Then I'll unscrew the Nio potentiometer and could send it in right away…

Greetings - Bernhard
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless