← VBar Control Touch / EVO

Warning - Regulator translated

VBar Control › VBar Control Touch / EVO · Started by k.h.o.heli on 17 September 2026 15:0417.09.2026 15:04
k.h.o.heli 17 September 2026 15:0417.09.2026 15:04
Hello everyone,

During my last flight, I received an audible warning from the transmitter, according to the log data:
YGE controller current limit reached. A 205 HVT is in use at 12S (il Goblin 700 KSE).
I hadn't received that information before. The helicopter was flying very erratically and the RPM was changing.
Perhaps someone can help me?
Thank you

Regards, Kurt
machine-translated from German · Show original
RV 17 September 2026 22:0617.09.2026 22:06
Well, since we're just the messengers, and the message itself is coming from the controller, you should probably check the settings in the "Limitations" window of the YGE app. There should be a value there that can be explained somehow.

By the way... flying blind here since there's no VBC or stabilization serial number => no log to view. Please make sure that's in the cloud and post the serial number here ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
k.h.o.heli 18 September 2026 13:1918.09.2026 13:19
Hello Rainer,

Here are the details: VBar Control touch / Evo 11004236
VBar Evo (VLink) 27003756

Log data: Start 15.09. 13:53


Regards, Kurt
machine-translated from German · Show original
RV 18 September 2026 14:2818.09.2026 14:28
Please provide further information; this question has not been answered.

Quote: Well, since we're just the messengers, and the message itself comes from the controller, you should probably check the settings in the "Limits" window of the YGE app. There should be a value there that can be explained somehow.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 18.09.2026 14:29 von RV.
machine-translated from German · Show original
k.h.o.heli 19 September 2026 11:2919.09.2026 11:29
Hello Rainer,

Here are screenshots from the YGE app.

Thank you very much for your help!

Regards, Kurt

machine-translated from German · Show original
RV 19 September 2026 15:2419.09.2026 15:24
So, if you look at the graph in the cloud, it looks pretty weird.

Things get chaotic with PWM and current - but never exceed the set value.
However... since the controller also monitors the phase currents internally, this entry could also be due to that.

I would check the wiring between the controller and the motor, and also check the motor for insulation faults between two phases. Something about the above looks very suspicious.

If that's OK - if necessary, contact YGE, perhaps the colleague there has an idea what's going on.

If necessary, one could also perform a cautious test flight to see if it recurs.

Regards (EN) / Greetings (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Please use a PC and a proper keyboard for posts and replies, and answer all questions completely. Take your time and answer follow-up questions thoroughly and completely.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For individual communication, please use email exclusively ! - Private messages, messenger, chat, etc. will not be processed.
For single user communication please send an email only ! PM, Messenger, Chat etc. won't be read.


machine-translated from German · Show original
k.h.o.heli 20 September 2026 14:0420.09.2026 14:04
Hello Rainer,

Thanks for the quick info, I'll check the wiring first.

Regards, Kurt
machine-translated from German · Show original
k.h.o.heli 15 October 2026 10:1515.10.2026 10:15
Hello Rainer,

The cables from the controller to the FBL were chafed in some places, I will get a new complete cable set.

Thank you so much for your help!

Regards, Kurt
machine-translated from German · Show original
RV 15 October 2026 19:5115.10.2026 19:51
:-) :-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless