← VBar Control Touch / EVO

Volume via potentiometer translated

VBar Control › VBar Control Touch / EVO · Started by Tgilf on 13 September 2026 21:0313.09.2026 21:03
Tgilf 13 September 2026 21:0313.09.2026 21:03
Hello everyone!
I've assigned the volume control to potentiometer 2 on the Vbar Control Touch. I find that very practical.
Now the EVO had to give way to the NEO because I will be installing it in the 700.
Once the NEO is connected, turning potentiometer 2 no longer does anything.

What am I doing wrong?

Thank you and best regards

Tom
machine-translated from German · Show original
RV 13 September 2026 21:5413.09.2026 21:54
How did you assign the potentiometer?

Probably via the Parameters Modify app. And this assignment there is tied to the model (SN of the stabilizer). If you change the stabilizer, you'll just have to redo it ;-)


BUT:

Check the volume menu (system) under the advanced settings. You've been able to assign a general volume control there for a few months now ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 14 September 2026 05:5514.09.2026 05:55
Good morning
I did it via settings and volume. You can assign the potentiometer there. But the volume field is now grayed out and shows 0%?
machine-translated from German · Show original
RV 14 September 2026 06:4614.09.2026 06:46
Then click on the button to the right of it...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Tgilf 14 September 2026 08:4014.09.2026 08:40
Thanks. Yes, you can assign the potentiometer there. That's what I've been doing so far. But when I turn potentiometer 2, I get the sound, but not the volume change indicator that used to appear in the top left corner. On my banks, I also always have the system and telemetry volume indicators. These changed analogously when you turned the potentiometer.
Something's wrong ????
machine-translated from German · Show original
RV 14 September 2026 21:1614.09.2026 21:16
That brings us to what I already wrote:

Quote: Probably via the Parameter Modify app. And this assignment there is tied to the model (SN of the stabilizer). Just redo it when changing stabilizers ;-)


Take a look at what's in the app on the connected model (the old stabilizer). Then program it the same way on the new stabilizer.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 14.09.2026 21:17 von RV.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless