XXL
10 September 2026 10:2310.09.2026 10:23
Hello,
Unfortunately, I couldn't find anything in the search.
My question: Is there a way to monitor the individual cell voltage of the flight battery?
Thank you very much.
Best regards, Andreas
TDR 2011, BLS452, BLS 251, Pyro 700-52, Jive 80+HV, Vstabi EVO Pro+, Logo 400 SE Vstabi EVO Pro+, Logo 200, VBC touch, Logo 550SX, NEO
Hallo,
habe leider in der Suche nichts gefunden.
Meine Frage: Gibt es eine Möglichkeit die Einzelzellenspannung des Flugakkus zu überwachen?
Besten Dank.
Liebe Grüße, Andreas
TDR 2011, BLS452, BLS 251, Pyro 700-52, Jive 80+HV, Vstabi EVO Pro+, Logo 400 SE Vstabi EVO Pro+, Logo 200, VBC touch, Logo 550SX, NEO
Eddi E. aus G.
10 September 2026 11:5110.09.2026 11:51
Hi Andreas,
No, we do not offer single-cell monitoring.
Personally, I can understand that it might have some charm, but I've never really missed it – I always toggle through the balancer menu on the charger, then I usually know whether the battery is healthy, or whether I have a faulty or defective cell in it.
Otherwise, flying by capacity has proven so (awesome?) advantageous that I don't even use a warning about the battery voltage etc., or a special cut-off in the controller.
I also think the batteries appreciate it if I don't drain them completely (like I used to...) but leave a reserve :-)
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Andreas,
nein, Einzelzellen-Überwachung bieten wir nicht an.
Persönlich kann ich verstehen, dass das Charme haben könnte, aber ich hab's eigentlich auch nie vermisst – am Lader toggle ich immer mal durch's Balancer-Menü, dann weiß ich normalerweise, ob der Akku gesund ist, oder ob ich 'ne faule oder malade Zelle drin habe.
Ansonsten hat sich das Fliegen nach Kapazität also so (geil?) vorteilhaft erwiesen, dass ich auch 'ne Warnung auf die Akku-Spannung etc. nicht nutze, oder einen speziellen Cut-Off im Regler.
Die Akkus danken's mir finde ich auch, wenn ich sie nicht (wie früher ...) bis auf den letzten Tropfen leersauge, sondern 'ne Reserve lasse :-)
Grüßle
Eddi
Born to fly ...
forced to work.
XXL
10 September 2026 12:5810.09.2026 12:58
Hi Eddi,
Thanks, and I'm almost there with you. It's more about ESCs that don't support telemetry, without using a current measurement tool...
Best regards, Andreas
TDR 2011, BLS452, BLS 251, Pyro 700-52, Jive 80+HV, Vstabi EVO Pro+, Logo 400 SE Vstabi EVO Pro+, Logo 200, VBC touch, Logo 550SX, NEO
Hi Eddi,
danke und ich bin fast bei Dir. Es geht eher um nicht telemetriefähige ESC's, ohne eine Strommessung dazwischen zu schalten.....
Liebe Grüße, Andreas
TDR 2011, BLS452, BLS 251, Pyro 700-52, Jive 80+HV, Vstabi EVO Pro+, Logo 400 SE Vstabi EVO Pro+, Logo 200, VBC touch, Logo 550SX, NEO
Eddi E. aus G.
10 September 2026 13:1110.09.2026 13:11
Hi,
Yes No :-)
'One could' possibly use a separate VBar NEO as a sensor hub to measure and process voltages using a voltage divider, but that would probably be overkill... with that effort, you could just buy a suitable small controller with telemetry and have all the convenience and benefits right away :-)
Or... the good old timer ^^
—Eddi
Born to fly ...
forced to work.
Hi,
ja ... nein :-)
'Man könnte' ggfs. eine separate VStabi NEO als Sensor-Hub nutzen, um mittels Spannungsteiler Spannungen zu messen und zu verwursteln, aber das wäre wohl overkill ... mit dem Aufwand könnte man auch einen passenden kleinen Regler mit Telemetrie schießen und hätte gleich allen Komfort und -zurück :-)
Oder ... der gute alte Timer ^^
—Eddi
Born to fly ...
forced to work.
XXL
10 September 2026 13:3410.09.2026 13:34
Eddi E. from G. wrote:
-------------------------------------------------------
Hi,
>
>.......
>
Or... the good old timer ^^
>
—Eddi
Yep, I do that too ;-)
Best regards, Andreas
TDR 2011, BLS452, BLS 251, Pyro 700-52, Jive 80+HV, Vstabi EVO Pro+, Logo 400 SE Vstabi EVO Pro+, Logo 200, VBC touch, Logo 550SX, NEO
Eddi E. aus G. schrieb:
-------------------------------------------------------
> Hi,
>
>.......
>
> Oder ... der gute alte Timer ^^
>
> —Eddi
Jep, das mache ich auch so ;-)
Liebe Grüße, Andreas
TDR 2011, BLS452, BLS 251, Pyro 700-52, Jive 80+HV, Vstabi EVO Pro+, Logo 400 SE Vstabi EVO Pro+, Logo 200, VBC touch, Logo 550SX, NEO