← VBar Control Touch / EVO

VBCT does not bind with Neo translated

VBar Control › VBar Control Touch / EVO · Started by rolf.oertli@gmail.com on 2 August 2026 17:2302.08.2026 17:23
rolf.oertli@gmail.com 2 August 2026 17:2302.08.2026 17:23
Hello everyone

I'm new here and hope someone can give me a tip.

I bought a SAB Genesis with Neo and VBCT. The seller couldn't demonstrate the helicopter for me because the VBCT didn't recognize the Neo.
However, she immediately recognized and connected to another helicopter.
Since I have only flown Futaba models so far and wanted to venture into the system with this purchase, I am unfortunately stuck and hope to find help here.

The Neo is flashing alternately blue and white. When I connect it via USB cable, a message appears stating that the system is up to date. However, when I try to log in with my ID, I get an incorrect password message. This is presumably because the Neo is still registered to the seller. The seller, however, stated that he deleted this registration from his ID and also removed the transmitter.

I don't know if it's a problem with the registration or some other error.
I would also like to register the system with my account and delete the old data that is still on the transmitter from the seller.

I would be very grateful for any tips.
machine-translated from German · Show original
RV 2 August 2026 17:4802.08.2026 17:48
Quote: When I try to log in with my ID, I get an "incorrect password" message. Presumably, this is because the Neo is still registered to the seller.

Nope. That has nothing to do with it.

Where and how would you like to log in, and with which login?
We're talking about the Mikado ID here, specifically the DE Mikado Shop account at the top right of this website.
If that doesn't work => Try it in the Mikado DE shop.

And does the updater display a serial number?
Which?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 4 August 2026 11:3004.08.2026 11:30
Hello Rainer

Thank you so much for your quick reply.

Unfortunately, I wasn't able to reply to you sooner.
The VBar Pro Evo V8 has the serial number 27006498 and the VBTC 11004413

Sorry if I'm not entirely sure about the terminology yet.

Regards, Rolf
machine-translated from German · Show original
RV 4 August 2026 20:3804.08.2026 20:38
Everything looks good at first glance - except that both devices are not yet registered, but this does not contribute to the binding process.

What firmware version is displayed on the VBC when it is switched on?
How do you proceed when binding the VBar EVO? Is anything else connected?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 6 August 2026 09:3206.08.2026 09:32
VBC Version 2.1.125

I switch on the transmitter and then the battery on the helicopter.
The Evo is flashing blue/white.
When I press the "Bind" button on the transmitter, it can't find Eva.
machine-translated from German · Show original
rolf.oertli@gmail.com 6 August 2026 09:3306.08.2026 09:33
All servos, controllers and data cables are plugged into the EVO.
machine-translated from German · Show original
RV 6 August 2026 10:1206.08.2026 10:12
Quote: Data cable

Is a USB port included?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 6 August 2026 16:1106.08.2026 16:11
No, there's no USB cable on the Neo.
machine-translated from German · Show original
RV 6 August 2026 16:4706.08.2026 16:47
Okay - please try the following:

- Connect the VBar EVO (this is not a NEO, it is an EVO) to PC Manager for updates (plug in USB, start Manager, turn on power)
- then register
- then select a different helicopter firmware, e.g. V7 Pro, and let it update.
- so that we can test and report

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 7 August 2026 15:5707.08.2026 15:57
When I turn on the power, a folder opens on the PC (VBOOT)

There are two files:
boat
vbar.ID

But I can't open either of them.

When I try to log in to the site, I get an "invalid password or username" message. However, I can log in without any problems on my Mac using the same address, but unfortunately the manager doesn't work there.
machine-translated from German · Show original
RV 7 August 2026 18:2207.08.2026 18:22
Quote: When I try to log in to the site, it says "invalid password or username".


Where exactly is the login done, and with what identifier?

Please note: There is a MIKADO ID (top right, shop login) AND a forum login. They may have been confused.

Mikado ID = Mikado Heli DE Shop = Top right
If in doubt, test it in the shop; the login is there.

The files themselves aren't important; we need the manager. It will then process everything.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 10 August 2026 18:0210.08.2026 18:02
Registration in the shop works without any problems.

When I open the VBar Control Manager and then connect the EVO to the PC via USB cable and then switch on the power supply in the helicopter, the message with serial number 27006498 appears, and below it says "Path found, version 8.2.11" and "VBar Pro EVO V8 Link - is up to date".

When I click on Applications, it says Access denied (You do not have permission to access this page).

Then nothing works anymore.
machine-translated from German · Show original
RV 10 August 2026 19:3010.08.2026 19:30
Did you also log in beforehand to vstabi.info in the top right corner (NOT FORUM!!!) using the same browser that it then opens?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 11 August 2026 08:5711.08.2026 08:57
...and, is anonymous/secure/private browsing enabled in the browser, or are cookies (including technically necessary ones) blocked?
If the browser is not allowed to remember (sandbox) that you are already logged in, it dutifully reports 'no access', as if you were _not_ logged in.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
rolf.oertli@gmail.com 14 August 2026 16:4814.08.2026 16:48
Yes, I first log in to vstabi.info, connect the EVO with the USB cable to the laptop I am logged into (not the forum) and connect the helicopter to the battery.
The boot folder opens as described above, but nothing else happens.
When I then open the Bar Control Manager, I see a window with the serial number etc. as described.

When I click on "Applications" there, I get an "Access denied" message.

In the meantime, I bought a new EVO, registered it, and installed it in the helicopter. Everything went smoothly without the slightest error.
Therefore, I don't believe it can be due to the PC.
machine-translated from German · Show original
RV 14 August 2026 20:3614.08.2026 20:36
Rolf,

Ask:

The login screen and the window that appears when clicking the button:

Does this happen in the SAME browser (as a new tab) and not in 2 different browsers OR in 2 different windows OR in a "Safe Mode" window?

- Some PCs do not always have the same browser set as the default apps for links, which is the one the customer regularly uses.
- Some PCs open in a safe window on the left.
- Some customers use their PCs in a secure browser window from the outset.

It always comes down to one of the three possibilities mentioned above... depending on how the user has configured their PC. Alternatively, it could be changing IP addresses for masking purposes on the router or smartphone, or changing MAC addresses, but whoever sets that up needs to know about that.

=> Please check this and, if necessary, attach full screenshots (everything must be visible!):

- after login
- after clicking

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




2 mal bearbeitet. Zuletzt am 14.08.2026 20:38 von RV.
machine-translated from German · Show original
rolf.oertli@gmail.com 18 August 2026 19:3618.08.2026 19:36
Hello Rainer

Thank you so much for your patience with my problem.

I opted for a pragmatic solution. The seller promised to take the EVO back if I can't get it working. I spoke with him and it's going in the mail tomorrow. Maybe he'll be able to get it working.

I ordered a new EVO from Hugo Makes, which will surely not cause any problems like the last one I bought from him some time ago.

Now I would like to activate my VBCT. How do I go about doing that?
machine-translated from German · Show original
RV 18 August 2026 21:0018.08.2026 21:00
Hello Rolf,

Register the VBC as shown in the video here:

https://www.vstabi.info/de/node/2279

Scan the QR code in the "Shop" menu item ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 20 August 2026 11:0320.08.2026 11:03
Since I bought the VBCT used, it was probably already registered.

I also don't have a CR code on the transmitter that I could scan.
machine-translated from German · Show original
RV 20 August 2026 18:1420.08.2026 18:14
You have it. Absolutely!

- Transmitter connected to Wi-Fi, all online services in the system must be enabled
- Open the shop app on the transmitter.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
rolf.oertli@gmail.com 21 August 2026 13:5221.08.2026 13:52
Yes, great, now I've found that too.

After over 20 years of using Futaba, it takes a little while to get used to it.

Thanks again for your support
machine-translated from German · Show original
RV 21 August 2026 14:1721.08.2026 14:17
:-) :-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless