← VBar Control Touch / EVO

Automatic mode switching app translated

VBar Control › VBar Control Touch / EVO · Started by Thomas L. on 5 July 2026 12:2805.07.2026 12:28
Thomas L. 5 July 2026 12:2805.07.2026 12:28
Hello, I'm new to the forum and I have a question for you.
I use my VbCt to control helicopters in Mode 3, and I control a fixed-wing aircraft with VPlane in Mode 1. When I started RC flying 25 years ago, I didn't give any thought to such basic settings.
When I was programming my first helicopter (Moskito Basic), the idea naturally arose to assign everything related to the swashplate to a single control stick. Unfortunately, control mode 1 for fixed-wing flight became so ingrained in my mind that I gave up after several attempts to relearn it.
Never mind... with my Futaba FF-9, I had to manually switch the stick mode from Mode 1 to Mode 3 and vice versa when changing models. The VbCt has a great app for this; it automatically switches the mode to match the model. That works very well so far.
Now I have a problem: after switching from my fixed-wing aircraft to the helicopter mode, and with a successful mode change, the helicopter's rotor starts to wander. Control input doesn't stop this wandering; after releasing the stick, the rotor (Logo 550SE) wanders back to the right.
Does anyone have any idea what the cause might be? If I manually switch the mode before connecting to the model, the switch works flawlessly.



Edited once. Last edited on July 5, 2026 at 12:29 PM by Thomas L.
machine-translated from German · Show original
RV 5 July 2026 19:2705.07.2026 19:27
Please calibrate the transmitter sticks ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Thomas L. 6 July 2026 20:2306.07.2026 20:23
Okay, the stick calibration is global and independent of the connected model, right? I think I already did that during the initial setup. I'll perform the calibration again tomorrow and then we'll see.
It's just strange, if I manually switch the mode before connecting everything works as it should...

Regards, Thomas
machine-translated from German · Show original
RV 6 July 2026 22:2806.07.2026 22:28
Yes - that's probably it... please try it out!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Thomas L. 7 July 2026 16:2307.07.2026 16:23
Hi Rainer, you were absolutely right, after calibrating the transmitter sticks everything is working perfectly now. Thank you so much for your help!
Regards, Thomas
machine-translated from German · Show original
Thomas L. 7 July 2026 16:2407.07.2026 16:24
The question marks were actually smileys.
machine-translated from German · Show original
RV 7 July 2026 17:0007.07.2026 17:00
!!!!!!!!!!








:-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless