Hello,
I've owned the VBC Evo+ for a while now and I'm still not entirely comfortable with the gimbal spring tension. I've tried many different settings to find the perfect one for me, and I'm now quite happy with the resistance, but I'm bothered by the strong locking action in the center. To get a good feel around the middle, I have to reduce the preload so much that the sticks feel too soft. As a thumb flyer with very short stick ends, I need a certain amount of resistance. My clubmate has the regular Evo with the standard gimbals, and his feels significantly softer around the center with a similar spring tension.
Is there any way to get the HAL gimbals to feel the same or similar to standard gimbals?
---------
Regards, Norbert
Heli-Club Hamburg EV
Edited once. Last edited on 08/06/2026 at 16:32 by Norb_HCHH.
I've owned the VBC Evo+ for a while now and I'm still not entirely comfortable with the gimbal spring tension. I've tried many different settings to find the perfect one for me, and I'm now quite happy with the resistance, but I'm bothered by the strong locking action in the center. To get a good feel around the middle, I have to reduce the preload so much that the sticks feel too soft. As a thumb flyer with very short stick ends, I need a certain amount of resistance. My clubmate has the regular Evo with the standard gimbals, and his feels significantly softer around the center with a similar spring tension.
Is there any way to get the HAL gimbals to feel the same or similar to standard gimbals?
---------
Regards, Norbert
Heli-Club Hamburg EV
Edited once. Last edited on 08/06/2026 at 16:32 by Norb_HCHH.
Hallo,
ich besitze die VBC Evo+ nun schon eine Zeit lang und fühle mich immer noch nicht so ganz Wohl mit der Federhärte der Gimbals. Ich Habe schon sehr viele versuche zur für mich perfekten Einstellung unternommen und bin jetzt mit dem Widerstand ganz zufrieden aber mich stört das die Gimbals in der Mitte so stark einrasten. Damit es sich für mich um die Mitte gut anfühlt muss ich die Vorspannung so weit zurückdrehen das sich die Knüppel dann zu weich anfühlen. Als Daumenflieger mit sehr Kurz eingestellten Stick-Ends brauche ich aber einen gewissen Widerstand. Mein Vereinskollege hat die Normale Evo mit den Standard Gimbals und die fühlen sich um die Mitte deutlich Weicher an bei ähnlicher Feder-Härte.
Gibt es da irgendeine Möglichkeit die HAL Gimbals auf das selbe oder ähnliche Feeling zu bekommen wie bei den Standard Gimbals?
---------
Gruß, Norbert
Heli-Club Hamburg E.V.
1 mal bearbeitet. Zuletzt am 08.06.2026 16:32 von Norb_HCHH.
ich besitze die VBC Evo+ nun schon eine Zeit lang und fühle mich immer noch nicht so ganz Wohl mit der Federhärte der Gimbals. Ich Habe schon sehr viele versuche zur für mich perfekten Einstellung unternommen und bin jetzt mit dem Widerstand ganz zufrieden aber mich stört das die Gimbals in der Mitte so stark einrasten. Damit es sich für mich um die Mitte gut anfühlt muss ich die Vorspannung so weit zurückdrehen das sich die Knüppel dann zu weich anfühlen. Als Daumenflieger mit sehr Kurz eingestellten Stick-Ends brauche ich aber einen gewissen Widerstand. Mein Vereinskollege hat die Normale Evo mit den Standard Gimbals und die fühlen sich um die Mitte deutlich Weicher an bei ähnlicher Feder-Härte.
Gibt es da irgendeine Möglichkeit die HAL Gimbals auf das selbe oder ähnliche Feeling zu bekommen wie bei den Standard Gimbals?
---------
Gruß, Norbert
Heli-Club Hamburg E.V.
1 mal bearbeitet. Zuletzt am 08.06.2026 16:32 von Norb_HCHH.
machine-translated from German · Show original