onit12
24 May 2026 10:3324.05.2026 10:33
Hello Mikado Team,
I performed a VBCT update yesterday, and since then the YGE telemetry no longer works on 2 helicopters (both with YGE Saphir 155).
The YGE telemetry app does not start or is not visible after the battery is plugged in, and therefore no telemetry is available.
I have updated the YGE controller to the latest version.
Side Node: Switching the temperature sensor checkbox on TELE1 on and off brings it back, but only for the first battery; as soon as I restart, the telemetry is gone again.
Thanks
LG
Tino
Hallo Mikado Team,
ich habe gestern ein Update der VBCT durchgeführt, seitdem funktioniert die YGE Telemetrie bei 2 Helis (beide mit YGE Saphir 155) nicht mehr.
Das YGE Telemetrie App wird nach Akku-Anstecken nicht gestartet bzw. ist nicht sichtbar und somit auch keine Telemetrie.
YGE Regler habe ich auf letzten Stand gebracht.
Side Node: Temperatursensor-Haken an TELE1 ein- und ausstellen bringt sie zurück, aber nur für den 1 Akku, sobald ich neu starte ist die Telemetrie wieder weg.
Danke
LG
Tino
RV
24 May 2026 13:2524.05.2026 13:25
Is it okay to plug the telemetry into TELE2?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Ist es denn ok wenn man die Telemetrie auf TELE2 einsteckt?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
onit12
24 May 2026 15:1724.05.2026 15:17
Hello Rainer,
Telemetry works immediately on TELE2; I plugged the battery ID into TELE1 for testing, but it doesn't work either.
LG
Tino
Edited once. Last edited on 24.05.2026 at 21:14 by onit12.
Hallo Rainer,
auf TELE2 funktioniert die Telemetrie sofort, testhalber AkkuID auf TELE1 gesteckt, geht aber auch nicht.
LG
Tino
1 mal bearbeitet. Zuletzt am 24.05.2026 21:14 von onit12.
RV
24 May 2026 22:2424.05.2026 22:24
Hi Tino,
Could you please give me the serial number of the affected stabilizer bar?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Hoi Tino,
hast Du mir mal bitte die Seriennummer der betroffenen Stabi?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
onit12
24 May 2026 22:2924.05.2026 22:29
27000488 and 27001827
Thank you,
LG
Tino
Edited once. Last edited on 24.05.2026 at 22:29 by onit12.
27000488 und 27001827
Vielen Dank,
LG
Tino
1 mal bearbeitet. Zuletzt am 24.05.2026 22:29 von onit12.
RV
24 May 2026 22:5624.05.2026 22:56
Thanks,
I'm working on it; I can now reproduce it here with VBar EVO Gen.1 and also prove it with DSO.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Danke,
da bin ich dran, ich kanns hier mittlerweile bei VStabi EVO Gen.1 nachvollziehen und mit DSO auch nachweisen.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ulrich
25 May 2026 09:4525.05.2026 09:45
So, thank you very much for the consistent reporting; the problem has been identified and fixed.
In the older EVO version, the pins for TELE1 are assigned slightly differently, and I had simply overlooked a detail to take into account.
V8.2 + Micro is now PL10 for the Pro and PL39 for the Rescue. This update is only relevant for the older EVO models; nothing changes for those with the new sensor.
So long... Uli
http://www.vstabi.de
Also, vielen Dank fürs konsitente Melden, das Problem ist erkannt und gefixed.
In der älteren EVO Version sind die Pins für TELE1 ein klein wenig anders belegt, und da hatte ich ein Detail schlichtweg übersehen zu berücksichtigen.
V8.2 + Micro ist nun pl 10 für die Pro und pl39 für Rescue. Das Update ist nur für die alten EVOs relevant, bei denen mit dem neuen Sensor ändert sich nichts.
so long ... Uli
http://www.vstabi.de
onit12
25 May 2026 10:1025.05.2026 10:10
Amazing, just updated, tested and working at the airfield :-)
Thanks Uli and Rainer for the quick fix and support!
Tino
Sensationell, am Flugplatz grad upgedatet, getestet und funktioniert :-)
Danke Uli und Rainer für den raschen Fix und Support!
Tino