Racerbuk
13 May 2026 18:0713.05.2026 18:07
Hello,
I ordered a Hobbywing Flyfun V5 110A ESC for my Agusta with a TRex 700. This ESC can be programmed for soft start. I want to use the ESC in my VBar Touch as a VBar ESC, which also has a soft start option. What's recommended? Both, just the ESC, or using it in the Touch?
One more thing: the controller seems to be usable out of the box. Does anyone have experience with this, or should parameters definitely be changed? Throttle calibration should definitely be performed before first use.
Thanks in advance for your help.
VG Günter
Hallo,
Ich hab mir für meine Agusta mit TRex 700 einen Hobbywing Flyfun V5 110A bestellt. Dieser Regler kann für einen Sanftanlauf programmiert werden. Ich möchte den Regler in der VBar Touch als VStabi Regler verwenden, hier gibt es ja auch die Möglichkeit des Sanftanlaufs. Was ist nun empfehlenswert ? Beides, nur Regler oder in der Touch ?
Dann noch etwas : der Regler ist anscheinend out of the box verwendbar. Hat hier jemand Erfahrung ob dem so ist oder ob man auf jeden Fall noch Parameter ändern sollte ? Gasweg anlernen sollte man ja auf jeden Fall vor der Erstverwendung.
Danke schon mal für die Hilfe
VG Günter
RV
13 May 2026 19:2913.05.2026 19:29
So... you can adjust the startup power in the HW app.
That would be the starting point.
The ramp-up is defined by...
Startup limiter (3, with 2 it takes longer)
Possibly integral (less than the default, perhaps).
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Also ... in der HW App kann man die Startleistung einstellen.
Das wäre der ANlauf.
Der HOCHlauf definiert sich aus.
Hochlauf Limiter (3, mit 2 dauerts länger)
Ggf. Integral (Weniger als Default ev.).
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Racerbuk
13 May 2026 19:5713.05.2026 19:57
Hello Rainer,
Thanks for the quick info. That helps me a lot.
Regarding the gas line, you wrote in another chat that it's a 90s style. So no need for it, right?!
Download the Hobbywing app to the transmitter via Wi-Fi?
VG Günter
Edited once. Last edited on 13.05.2026 at 19:58 by Racerbuk.
Hallo Rainer,
Danke für die schnelle Info. Hilft mir weiter.
Bzgl Gasweg hast Du mal geschrieben in einem anderen Chat, dass das 90iger Style ist. Also keine Notwendigkeit , oder ?!
Hobbywing App am Sender via Wlan runterladen ?
VG Günter
1 mal bearbeitet. Zuletzt am 13.05.2026 19:58 von Racerbuk.
RV
13 May 2026 20:5013.05.2026 20:50
Install the HW App on the VBC, connect telemetry, RPM, master, and slave, turn it on – and it should respond. Throttle paths will then be set. Now, in the model setup, click VGov (the ESC will be configured there as well). Adjust the rotation direction and BEC in the HW App, and you're done.
Depending on the ESC, a suitable firmware from HW may be required for the controller.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 13.05.2026 20:52 von RV.
HW App auf die VBC, Telemetrie, RPM, Master, Slave dran, einschalten - und er muss sich schon melden. Gaswege sind dann gesetzt. Nun im Modell Setup VGov anklicken (ist dort dann der ESC gleich mit verarztet). Drehrichtung und BEC noch in der HW App anpassen, fertig.
Je nach ESC brauchts ggf. eine Firmware passend von HW auf dem Regler.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 13.05.2026 20:52 von RV.
Racerbuk
14 May 2026 08:5914.05.2026 08:59
Okay, I'll do that. Thanks.
Ok, werde ich so machen. Danke
Racerbuk
17 May 2026 10:2817.05.2026 10:28
One more question, I don't want to set anything incorrectly.
My rotor is counter-clockwise, the tail rotor is clockwise and rotates forward towards the helicopter. I've always set the direction of action on my helicopters (clockwise rotation, tail rotor rotating clockwise backward) so that a tail blade pointing upwards also tilts to the left with the stick movement, i.e., the sliding cover tilts to the right. This works exactly the same way with the FBL system: when the helicopter's tail is moved to the left, the blade pointing upwards also tilts to the left.
Is it the other way around for counter-clockwise rotating rotors with a tail rotor that rotate clockwise?
Greetings Günter
Noch eine Frage, will da nichts falsch einstellen.
Mein Rotor ist ein linksdreher, der Heckrotor ist rechts und dreht nach vorne zum Heli hin. Jetzt hab ich die Wirkrichtung immer so bei meinen Helis ( rechtsdreher, Heckrotor rechts nach hinten drehend ) eingestellt, dass ein Heckblatt das nach oben zeigt , sich mit dem Knüppel auch nach z.b. links neigt , die Schiebehülle also nach rechts. Genau wie das FBL , wenn der Heli am Heck nach z.b. links bewegt wird, sich das Blatt das nach oben zeigt auch nach links neigt.
Ist das bei Linksdrehern mit Heckrotor rechts nach vorne drehend andersherum ?
Grüsse Günter
JMalberg
17 May 2026 10:5617.05.2026 10:56
Hey Racerbuk,
Whether the HaRo is right- or left-handed has nothing to do with the direction of action. Whether the HeRo sliding sleeve moves left or right only relates to the linkage of the HeRo blades.
Observe how the HeRo blades move when you control yaw left or right. Then you'll be sure that
Now turn the entire helicopter to the left or right and see that the HeRo blades try to push it back.
Have someone else check everything again! Nine eyes see more than one! :-)
From experience, also check if the HeRo blades are mounted the right way round. If not, the control and effect direction will be exactly reversed. Checking as described above won't help then. It cost a flying buddy his entire helicopter because we all forgot to check that. That was stupid!
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Edited once. Last edited on 17.05.2026 at 10:58 by JMalberg.
Moin Racerbuk,
ob HaRo-Rechts- oder -Linksdreher hat nix mit der Wirkrichtung zu tun. Ob die HeRo-Schiebehülse nach links oder rechts geht hat auch nur mit der Anlenkung der HeRo-Blätter zu tun.
Schau dir an wie sich die HeRo-Blätter bewegen, wenn du Gier links oder rechts steuerst. Dann bist du sicher dass
Jetzt den ganzen Heli nach links oder rechts drehen und schauen dass die HeRo-Blätter ihn zurückdrücken wollen.
Alles nochmal durch jemand anderes prüfen lassen! Neun Augen sehen mehr als eins! :-)
Aus Erfahrung auch gucken ob die HeRo-Blätter richtig herum montiert sind. Wenn nicht sind die Steuer- und Wirkrichtung genau falsch herum. Da hilft auch keine Kontrolle wie oben beschrieben. Hat einen Fliegerkumpel den kompletten Heli gekostet, weil wir alle zusammen genau das nicht geprüft haben. War doof!
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
1 mal bearbeitet. Zuletzt am 17.05.2026 10:58 von JMalberg.
Racerbuk
17 May 2026 11:3417.05.2026 11:34
Hello Jürgen,
I don't want to start the helicopter up and risk it tipping over because the linkage is moving in the wrong direction. I just need to know whether the sleeve should move to the right or left when I move the stick, for example, to the right. The tail rotor is on the right side in the direction of flight, the blade moves forward, and the blades are oriented correctly, with the thick leading edge facing forward in the direction of rotation.
Greetings Günter
Hallo Jürgen,
Ich will den Heli nicht erst hochlaufen lassen und riskieren dass er umfällt weil sich die Anlenkung in die falsche Richtung bewegt. Mir wäre nur wichtig zu erfahren, muss sich die Hülse nach rechts oder links bewegen, wenn ich den Knüppel nach z.B. rechts bewege. Der Heckrotor sitzt rechts in Flugrichtung, das Blatt bewegt sich nach vorne und die Blätter sitzen richtig herum, als mit der dicken Vorderkante nach vorne in Drehrichtung.
Grüsse Günter
JMalberg
17 May 2026 15:0517.05.2026 15:05
Under no circumstances should you fly it before the tail section has been checked!!
"Turning the helicopter" for the exam means you put it on the workbench and turn it. ;-)
Then a friend joins in and checks it again.
...and forget about checking by sliding sleeve direction: Look at the HeRo blades, push them in a moment!
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Edited once. Last edited on 17.05.2026 at 15:07 by JMalberg.
Auf keinen Fall fliegst du ihn bevor das Heck geprüft ist!!
Den "Heli drehen" zur Prüfung heißt, du stellst ihn auf die Werkbank und drehst ihn. ;-)
Dann kommt noch ein Kumpel/in dazu und prüft es auch nochmal.
... und vergesse die Prüfung per Schiebehülserichtung: Schau dir die HeRo-Blätter an, vorhin sie drücken!
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
1 mal bearbeitet. Zuletzt am 17.05.2026 15:07 von JMalberg.
Eddi E. aus G.
18 May 2026 09:0718.05.2026 09:07
Good morning,
which is also safe (if you're a little careful ^^) ... place the model on a smooth surface, where it can be turned relatively easily on its skids (doesn't work so well with wheeled chassis, or rather, it won't like it ^^).
Then (using only the rear blades) let it run up to a low speed and check if it works correctly.
This can also be done (carefully) with main rotor blades, especially if the model is large and heavy, so that you can make the model a little lighter on the skids so that it turns more easily.
The helicopter won't fall over immediately unless you start messing around with the main rotor.
Finger on the motor switch when the humming starts, OFF.
But Jürgen's technique is correct: the direction of rotation doesn't matter, nor does leading/trailing linkage; aerodynamics is what matters.
That is, the trailing edges of the rotor blades determine where the air is scooped, just like with a propeller (which it is).
This allows you to control and view the model: stick (nose of the model) on the left, trailing edges are laid out to the left (main rotor axis), etc.
And turn the model around, and look.
A tail rotor running in reverse (tail blades mounted backwards but correctly adjusted for the right way) will work, just not very well, and sounds strange. No questions asked :-)
A tail rotor that was initially assembled backwards (by the pilot), which I intuitively reassembled correctly (to fix tail wag), but the setup wasn't checked again because... it worked before... but that meant it was working backwards... not :-) I won't name names...
—Eddi
Born to fly ...
forced to work.
Moin,
was auch gefahrlos geht (wenn man ein bisschen aufpasst ^^) ... Modell auf einen glatten Untergrund stellen, worauf es sich relativ leicht auf den Kufen drehen lässt (geht nicht so gut mit Radfahrwerk, bzw. das wird das nicht mögen ^^).
Dann (nur mit Heckblättern) auf eine niedrige Drehzahl hochlaufen lassen und dabei schauen, ob's richtig wirkt.
Geht (vorisichtig) auch mit Hauptrotorblättern, insb. wenn das Modell groß und schwer ist, so dass man das Modell etwas leichter machen kann auf den Kufen, damit es leichter dreht.
Sofort umfallen wird der Heli dabei nicht, wenn man nicht am Hauptrotor anfängt, rumzusteuern.
Finger am Motorschalter, wenn beginnender Brummkreisel, AUS.
Aber Jürgens Technik ist schon richtig: Drehrichtung spielt keine Rolle, auch vor-/nachlaufend angelenkt nicht, die Aerodynamik spielt.
D. h. die Endleisten der Rotorblätter bestimmen, wohin die Luft geschaufelt wird, wie bei einem Propeller (isses ja auch).
So kann man steuern und schauen, Knüppel (Nase des Modells) links, Endleisten werden nach links ausgelegt (Drehachse Hauptrotor) etc.
Und das Modell drehen, und schauen.
Ein Rückwärts laufender Heckrotor (Heckblätter falsch herum montiert aber für richtig herum richtig eingestellt) funktioniert, nur nicht so gut, und klingt komisch. Keine Fragen :-)
Ein (vom Piloten) von vorn herein falsch herum aufgebauter Heckrotor, der (nach Aufgabenstellung, Heckpendeln zu verarzten) von mir intuitiv richtig herum wieder aufgebaut wurde, Setup wurde aber nicht mehr geprüft weil ... ging ja vorher ..., damit aber falsch herum wirkte, ... nicht :-) ich nenne keine Namen ...
—Eddi
Born to fly ...
forced to work.
Racerbuk
20 May 2026 13:3420.05.2026 13:34
Perfect, I'll do it that way with the tail blades. Just see where the nose moves, and it'll be fine. Thanks for the help.
Greetings Günni
Perfekt, ich mach das so mit den Heckblättern. Sehen wohin sich die Schnauze bewegt, dann passt das. Danke für die Hilfe.
Grüsse Günni