sme
9 May 2026 15:1909.05.2026 15:19
Hello Mikado Team,
To conserve the transmitter battery while at the flying field, I set standby to 4 minutes.
Unfortunately, that's not enough to upload all flights to the cloud at home.
Could you perhaps implement something to prevent standby mode while the transmitter is uploading data?
Best regards
Stefan
Hallo Mikado Team,
um am Platz mit dem Senderakku zu haushalten habe ich standby nach 4 Minuten eingestellt.
Leider reicht das dann nicht aus um zu Hause alle Flüge in die cloud zu laden.
Könnten ihr da vielleicht mal etwas einbauen, dass den Standby Modus verhindert während der Sender Daten hochläd?
Viele Grüße
Stefan
RV
9 May 2026 15:2409.05.2026 15:24
Just leave the binding dialog open ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Lass einfach den Bindedialog auf ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
sme
9 May 2026 19:0509.05.2026 19:05
Hello Rainer,
Thanks in advance for the tip.
Nevertheless, it would of course be nice if the system would switch off at the end of the transmission.
Or/and it would display when it has finished transferring. :-)
Best regards
Stefan
Hallo Rainer,
schonmal danke für den Tip.
Trotzdem wäre es natürlich schön, wenn sich die Anlage dann am Ende der Übertragung abschalten würde.
Oder/und anzeigen würde, wenn sie fertig mit übertragen ist. :-)
Viele Grüße
Stefan
RV
9 May 2026 19:2809.05.2026 19:28
Well, during the process we have no control over what else needs to be transferred. We crawl through the files one by one in the background without knowing how many there are left – or how large they are.
One could wait until it's all "over". But that's for Uli to assess.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Tja - während des Vorganges haben wir keine Kontrolle was noch ansteht zum Übertragen. Wir crawlen Datei für Datei im Hintergrund durch ohne zu wissen wie viele es noch sind - und wie groß.
Man könnte maximal warten bis das einmal "rum" ist. Aber das muss Uli bewerten.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
thomas1130
9 May 2026 19:3309.05.2026 19:33
Honestly, I consider that a "non-problem"...
This has been the case since day one of the VBC - so for many years - but overall it has still uploaded all the files...
Since the EVO, it's significantly better than with the touch version - the speed of the wireless connection is probably the deciding factor - because the amount of data isn't really the "problem" for a modern WLAN...
If not all flights are uploaded, I simply turn them on again briefly - and then it's fine.
In my opinion, this is not a significant problem in everyday life.
jm2c
Best regards,
Thomas
Ehrlich gesagt halte ich das für ein "non problem"...
Das gibt es seit Tag 1 der VBC - also seit vielen Jahren - aber in Summe hat sie immer noch alle Dateien hochgeladen ..
Seit der EVO ist es deutlich besser als bei der touch - die Geschwindigkeit der Funke ist wohl ausschlaggebend - denn die Menge der Daten ist für ein modernes WLan ja eher nicht das "Problem"...
Sollten mal nicht alle Flüge hochgeladen sein, schalte ich sie einfach noch mal kurz ein - und dann passt es..
Ist mMn kein nennenswertes Problem im Alltag.
jm2c
LG,
Thomas
sme
9 May 2026 19:4709.05.2026 19:47
Hello Thomas,
That's your opinion, and your contribution doesn't help to solve anything.
If I saw it that way too, I probably wouldn't have questioned it.
Best regards
Stefan
Hallo Thomas,
das ist deine Meinung und dein Beitrag trägt auch nicht zur Lösung bei.
Wenn ich das auch so sehen würde, hätte ich das wohl nicht hinterfragt.
Viele Grüße
Stefan
sme
9 May 2026 19:4909.05.2026 19:49
RV wrote:
-------------------------------------------------------
Well, we didn't have any during the process.
> Checking what still needs to be transferred. We
> crawl file by file in the background without
> to know how many there are left - and how big.
>
One could at most wait until it's "over"
> is. But Uli has to assess that.
Hello Rainer,
Thanks again for your explanation.
Then I'll wait and see if Uli has anything to say about it and whether it can and should be incorporated.
Best regards
Stefan
RV schrieb:
-------------------------------------------------------
> Tja - während des Vorganges haben wir keine
> Kontrolle was noch ansteht zum Übertragen. Wir
> crawlen Datei für Datei im Hintergrund durch ohne
> zu wissen wie viele es noch sind - und wie groß.
>
> Man könnte maximal warten bis das einmal "rum"
> ist. Aber das muss Uli bewerten.
Hallo Rainer,
nochmal danke für deine Erklärung.
Dann warte ich mal ob Uli dazu was sagen kann und ob man es einbauen kann und möchte.
Viele Grüße
Stefan
JMalberg
9 May 2026 22:3209.05.2026 22:32
A different approach...
@sme: Your VBC is apparently a Touch, which is rather slow when uploading compared to the EVO.
How many flights do you make per day and how long are they? Many flights and long log files ==> a lot of uploading.
On average, I manage 5-6 flights of 6-8 minutes each on our field. My VBC Touch still managed the upload at home within the standby time of 3 minutes.
With the VBC EVO, that's no longer an issue.
Can you find out what upload speed your Wi-Fi network is capable of? It's possible that it's not compatible and is slowing down the upload.
@RV: Could you add standby time tracking to the "HomeZone" app?
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Mal ne andere Herangehensweise...
@sme: Deine VBC ist offenbar eine Touch, die im Vergleich zur EVO beim Upload eher gemächlich ist.
Wie viele Flüge machst du pro Tag und wie lange sind sie? Viele Flüge und lange Log-Dateien ==> ne Menge Upload.
Ich schaffe auf unserer Wiese durchschnittlich 5-6 Flüge á 6-8min. Meine VBC Touch schaffte den Upload zu hause dennoch in der StandBy-Dauer von 3min.
Mit der VBC EVO ist das eh keine Sache mehr.
Kannst du herausbekommen welchen Upload dein WLAN schafft? Evtl verträgt es sich nicht gut und bremst den Upload ein.
@RV: Könnte man in der App "HomeZone" die StandBy-Zeit einbauen?
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
JMalberg
9 May 2026 22:4309.05.2026 22:43
I've now looked at the amount of data for the upload.
That's only about 100KB per flight, and less than 1MB for 10 flights. A modern Wi-Fi network would barely register that amount of data.
Then the bottleneck must be in the VBC's upload routine, or the VBC and WLAN are incompatible.
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Ich habe jetzt mir jetzt mal die Datenmenge angesehen für den Upload.
Das sind pro Flug nur ~100KB und bei 10 Flügen nicht mal 1MB. Über diese Datenmenge grinst ein heutiges WLAN nur müde.
Dann muss mAn die Bremse in der Upload-Routine der VBC sein oder das VBC und WLAN vertragen sich nicht.
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
sme
10 May 2026 08:2810.05.2026 08:28
Hello Jürgen,
It's an EVO (see title :-) ).
Since I don't necessarily upload the logs after every flight day, I sometimes end up with a bit more data.
And since the transmitter works perfectly with Heli-X via WIFI, it also has no fundamental problem with my WLAN.
I gave up trying to use my phone as a hotspot, as the transmitter can't maintain a consistent signal despite a 5G connection, even if it only covers 5-6 flights.
Best regards
Stefan
Hallo Jürgen,
es handelt sich um eine EVO (siehe Titel :-) ).
Da ich nicht unbedingt nach jedem Flugtag die logs hoch lade, kommt da bei mir auch schonmal etwas mehr zusammen.
Und da sich der Sender wunderbar über WIFI mit Heli-X verträgt, hat er auch kein grundsätzliches Problem mit meinem WLan.
Versuche übers Handy als hotspot habe ich aufgegeben, da der Sender das trotz 5G Verbindung nicht schafft ohne zwischendurch zu ruhen. Auch wenn es dann z.B. nur 5-6 Flüge sind.
Viele Grüße
Stefan
JMalberg
10 May 2026 10:2910.05.2026 10:29
VBAR EVO is clear, but this is about the VBC ;-) So I'll assume it's a VBC EVO.
The VBC EVO is incredibly fast, especially regarding Wi-Fi. As far as I know, Wi-Fi communication with the Heli-X uses UDP, while file transfers use the classic TCP protocol. Therefore, I think the VBC isn't the bottleneck, but rather the connection itself. I've had the experience that a mesh repeater in my Wi-Fi network occasionally caused problems, but I couldn't find or fix anything myself. With the current repeater, it's been working perfectly ever since.
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
VBAR EVO ist schon klar, aber hier geht es um die VBC ;-) Dann gehe ich mal davon aus, dass es eine VBC EVO ist.
Gerade die VBC EVO ist bzgl WLAN sauschnell. Die WLAN-Kommunikation zum Heli-X geht mWn über UDP; der Filetransfer aber klassisch über TCP. Deshalb denke ich, dass die VBC nicht die Bremse ist, sondern die Verbindung an sich. Ich habe die Erfahrung, dass es hier in meinem WLAN ein MESH-Repeater immer mal Ärger machte, ich aber mit meinen Mitteln nichts finden und ändern konnte. Mit dem aktuellen Repeater funktioniert es seitdem.
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )