← VBar Control Touch / EVO

Battery Manager translated

VBar Control › VBar Control Touch / EVO · Started by Simon_75 on 26 April 2026 19:0926.04.2026 19:09
Simon_75 26 April 2026 19:0926.04.2026 19:09
Hello
I bought a second helicopter and installed a new EVO 8.2Pro/rescue system.
Since then, the battery manager no longer works on either model (it cannot be selected).

The first model, Goblin 570, has a built-in HW 150A v5.1 with telemetry and power backup (telemetry).
The Goblin RAW 700 has a YGE Aureus 135HV with telemetry installed, with backup 1st buffer 25F (without telemetry).

What could it be?

Best regards, Simon
machine-translated from German · Show original
RV 26 April 2026 19:2326.04.2026 19:23
Questions:

- Are the respective controls responding – i.e., are the telephoto controls working?
- Is the manager icon displayed?
- Which serial numbers do VBC and leg stabilizers have?
Are logs from both devices running "without battery manager" in the cloud?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Simon_75 26 April 2026 19:5426.04.2026 19:54
Hello Rainer

Raw 700 : 0027011274
Goblin 570 : 0027010050
VBar: 11007665
The symbol is displayed in the menu but is greyed out and cannot be selected.
Controllers report

The data entry indicates that no data is available.

I renamed the batteries using the Goblin 570, hence the 0-minute flight time.

PS: It started when I added a new battery, and after that, it was always automatically selected. Then I wanted to rename the batteries using the manager and realized I could no longer access the menu.



Edited twice. Last edited on 26.04.2026 at 20:06 by Simon_75.
machine-translated from German · Show original
RV 26 April 2026 21:5226.04.2026 21:52
Hi Simon,

There is no VBar 11007665. There is a VBar Control, however.
Please note our terminology. VBar = VBar = the part in the model. VBar Control = the part in your hand.

To Raw with VBar 27011274:

I read:
04/26/2026 4:11:21 PM Good; Fixed battery ID: 0027011274

=> You have downloaded the Fixed Battery ID app AND have permanently paired a battery with THIS model. Therefore, it will be selected automatically – as it should be when you do it this way.

If this is not desired for a connected model, long-click on the name in the battery settings and disable it.


Regarding the 570 with VBar 270110050:

I read:
25.04.2026 19:55:50 Good; Manual battery selection: GENS ACE 6000 1

So, a battery was selected manually, everything is OK here for now.


If the menu is locked, it could be because the pilot hasn't switched the motor to OFF. This is especially common with pilots who are used to a manual switch and don't want to switch to a 3-position switch.

Do you have a genuine motor switch like the one we recommend with 3 positions?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 26.04.2026 21:53 von RV.
machine-translated from German · Show original
Simon_75 26 April 2026 23:0226.04.2026 23:02
Thank you for your reply. Yes, I have a 3-position switch:

Engine off / Autorotation / Engine on
machine-translated from German · Show original
Eddi E. aus G. 27 April 2026 09:1627.04.2026 09:16
Good morning,

To be more precise, is the 3-position switch (they all are) a short one that locks in all three positions, or a long one that only locks in AR and ON, but you would have to hold it in OFF?

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Simon_75 27 April 2026 10:5727.04.2026 10:57
It clicks into place and is the short one on the top right next to the screw potentiometer.
machine-translated from German · Show original
Eddi E. aus G. 27 April 2026 11:1027.04.2026 11:10
OK, then that's not it. Thanks :-)

The icon remains grey until the controller has transmitted all current data to the VBar once; this can take a few seconds, especially if the model is very close to the transmitter and the radio is overloaded despite near-field mode.

The app will only become active/selectable once all the necessary settings are known.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Simon_75 27 April 2026 20:4427.04.2026 20:44
I flew both helicopters again today; all data (including telemetry) is fine, but the menu is inaccessible. I can always turn one battery on and off to manage the batteries, but the manager should still work.
Is there a way to reset the manager?
machine-translated from German · Show original
RV 27 April 2026 22:3227.04.2026 22:32
Could you please take a video or photos showing exactly the situation in which you are unable to use the manager?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 28 April 2026 09:2928.04.2026 09:29
Good morning,

To put it another way... the battery manager is blocked as soon as a battery is selected.
From then on, logging and everything else starts.
It would be selectable if you accidentally or intentionally turned off the battery selection (that's the battery manager ;-) ) and then wanted to select a battery afterward.

It is not intended to change the (once selected) battery again during operation.

The following tools are available: Fixed battery ID (long click on battery name (Change)), the confirmation 'Do you really want to?' during manual battery selection, and the Top 5 (in the Battery Alarm menu).

Grüßle

Eddi

Born to fly ...
forced to work.



1 mal bearbeitet. Zuletzt am 28.04.2026 09:30 von Eddi E. aus G..
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless