DirkBergmeier
8 March 2026 19:1708.03.2026 19:17
Hello,
I have no HW icon in the Evo, despite HW firmware 4.1.00 or 4.1.01 in the Hobbywing Platinum V5.1 150A.
Also, no HW Software is visible in the telemetry, even though there should be two icons.
Deleted and reinstalled multiple times.
The Hobbywing USB Link SW does not offer any special VBAR versions of the firmware (for Platinum V5.1).
The Vbar Control Evo is state-of-the-art.
The VBar Professional Rescue 6.4 firmware has also been updated.
No matter which TELE I use, 1 or 2, there's no reaction.
Where's the problem? I need some help 8-)
Best regards, Dirk
Hello,
ich habe kein HW Icon in der Evo, trotz HW Firmware 4.1.00 oder 4.1.01 im Hobbywing Platinum V5.1 150A.
Auch ist in der Telemetrie, kein HW Software zu sehen, sollten ja zwei Ikons da sein.
Mehrfach gelöscht und neu Installiert.
Die Hobbywing USB Link SW bietet auch keine speziellen VBAR Versionen der FW an (für Platinum V5.1).
Die Vbar Control Evo ist auf dem neuesten Stand.
Auch das VBar Professional Rescue 6.4 Firmware wurde Aktualisiert.
Egal welchen TELE ich nehme, 1 oder 2, keine Reaktion
Wo hängt es, bräuchte mal Unterstützung 8-)
Beste Grüße Dirk
Eddi E. aus G.
9 March 2026 09:2609.03.2026 09:26
Hi Dirk,
There was something about that.
Link .
It seems the problem was with the version of the USB Link software.
Otherwise, please take another close look at the wiring, and/or post informative pictures.
At the moment, the VBar does not recognize that a controller is connected that speaks its language, therefore this is not communicated to the transmitter, and therefore it does not load the corresponding app.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Dirk,
da war mal was.
Link.
Dort lag's scheint's an der Version der USB Link Software.
Ansonsten schau bitte nochmal die Verkabelung genau an, und/oder poste aussagekräftige Bilder.
Im Moment erkennt die VStabi nicht, dass da ein Regler dran hängt, der ihre Sprache spricht, daher wird das dem Sender nicht mitgeteilt, daher lädt der die entsprechende App nicht.
Grüßle
Eddi
Born to fly ...
forced to work.
DirkBergmeier
10 March 2026 17:0510.03.2026 17:05
Hi Eddy,
I tried it with the Hobbywing_USB_Link_V5.1.0 software, unfortunately without success.
I've now contacted Hobbywing and am waiting for a reply; I'm curious to see what they say!
I'm surprised that so many people can establish a connection with the VBar NEO receiver.
get in touch
Regards, Dirk
Hallo Eddy,
Habe es mit der Software Hobbywing_USB_Link_V5.1.0 versucht, leider ohne Erfolg.
Habe jetzt mal Hobbywing angeschrieben, und warte auf die Antwort, bin mal gespannt was da kommt!
Bin schon Verwundert das viele mit dem VStabi NEO Empfänger, eine Verbindung herstellen können.
Melde mich
Gruß Dirk
Eddi E. aus G.
11 March 2026 09:0211.03.2026 09:02
Hi Dirk,
Well, 'normally' it just works like that, plug and play.
Another idea would be whether this VBar was ever programmed for Spektrum at some point? I mean, is TELE 1/2 perhaps set to Spektrum in Model Setup/Macro Cell Setup/Input/Output Configuration? If so, the VBar would primarily listen for that (even though it always connects primarily to a VBar Control), but not for telemetry.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Dirk,
naja, 'normalerweise' funktioniert das auch einfach so, plug and play.
Ne Idee wäre noch, war diese VStabi früher irgendwann mal auf Spektrum programmiert? Meine damit, ist in Modell Setup/Makrozellen Setup/Ein-/Ausgangskonfiguration ggfs. TELE 1/2 auf Spektrum gestellt? Dann würde die VStabi primär darauf hören (auch wenn sie so immer primär mit einer VBar Control verbindet), aber eben nicht auf Telemetrie.
Grüßle
Eddi
Born to fly ...
forced to work.
DirkBergmeier
11 March 2026 12:2011.03.2026 12:20
Hi Eddy,
The idea wasn't bad, but everything about the settings was fine.
AUX1/Tele1+2 Normal.
Please, next suggestion :-)
Regards, Dirk
Hallo Eddy,
die Idee war nicht schlecht, aber alles von den Einstellungen in Ordnung.
AUX1/Tele1+2 Normal.
Bitte nächsten Vorschlag :-)
Gruß Dirk
Eddi E. aus G.
11 March 2026 13:2311.03.2026 13:23
Hi Dirk,
Do you have another telemetry device that you could connect to this VBar?
Perhaps simply use a throw cable and place another model next to it?
Then we would at least know (hopefully) that everything is okay up to the pins in the sockets.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Dirk,
hast Du ein anderes Telemetrie-Gerät, was Du mal an diese VStabi anschließen kannst?
Ggfs. einfach mit einem Wurfkabel, anderes Modell daneben stellen?
Dann wüssten wir schon mal (hoffentlich), dass bis zu den Pins in den Buchsen alles gut ist.
Grüßle
Eddi
Born to fly ...
forced to work.
DirkBergmeier
11 March 2026 14:1111.03.2026 14:11
Hi Eddy,
I still have a current/voltage sensor from you here, no problems with it.
And it doesn't matter if both channels are showing on Tele1+2.
Hallo Eddy,
Habe noch ein Strom-/Spannungs-Sensor von euch hier, keine Probleme damit.
Und es ist egal ob in Tele1+2 beide zeigen an.
Eddi E. aus G.
11 March 2026 14:1611.03.2026 14:16
Aye, then it's definitely not the stabilization system.
And neither does the transmitter, which downloads the required app on the advice of the VBar when the controller contacts it and says, "Hello, I am HobbyWing anyway" (or the transmitter even complains that it is missing when Auto Install is loaded, and offers the installation with one click).
So, cables, plugs, controller, socket there, firmware, programming of the controller (possibly the telemetry mode is permanently set to a different telemetry?).
Grüßle
Eddi
Born to fly ...
forced to work.
Aye, dann ist's schon mal nicht die Stabi.
Und der Sender auch nicht, der lädt ja die benötigte App auf Anraten der VStabi, wenn der Regler eben bei ihr anklopft und sagt, hallo erst mal, ich bin der HobbyWing sowienoch (oder der Sender mault sogar, dass sie fehlt, wenn Auto Install geladen ist, und bietet die Installation mit einem Klick an).
Also Kabel, Stecker, Regler, Buchse dort, Firmware, Programmierung des Reglers (ggfs. ist der Telemetriemodus auf eine andere Telemetrie fest eingestellt?).
Grüßle
Eddi
Born to fly ...
forced to work.
Teci
11 March 2026 14:5411.03.2026 14:54
Hi
Connect directly to the USB Link 5.1, not via the fan Y-cable, and do not use any telemetry cables on the Hobbywing.
USB Link 5.1 Check Progbox for firmware updates and update if necessary.
The Hobbywing firmware must include PL-04.1.00-VBar; the VBar suffix is important. All others without this suffix do not support Vbar telemetry.
Once this is installed, the Vbar will recognize it and should offer to install the Hobbywing app.
VG ;-)
Hi
mit der USB Link 5.1 direkt verbinden nicht über das Lüfter Y-Kabel und keine Telemetriekabel am Hobbywing.
USB Link 5.1
Progbox auf Firmware Updates prüfen eventuell Aktualisieren
Bei der Hobbywing Firmware muss dann die PL-04.1.00-VBar auftauchen wichtig ist der Zusatz VBar alle anderen ohne diesen Zusatz Unterstützen keine Vbar Telemetrie.
diese einspielen, die Vbar erkennt ihn dann und sollte die Installation der Hobbywing APP anbieten.
VG ;-)
DirkBergmeier
11 March 2026 15:5611.03.2026 15:56
TECI,
That's exactly how I did it ;-)
Unfortunately, I cannot see the addition "the important addition is VBar".
Result....... no telemetry visible.
Regards, Dirk
TECI,
genau so habe ich es gemacht ;-)
Leider kann ich kein Zusatz sehen "wichtig ist der Zusatz VBar"
Ergebnis....... keine Telemetrie zu sehen.
Gruß Dirk
DirkBergmeier
11 March 2026 16:4411.03.2026 16:44
Here's the answer :-) ??? Who was the manufacturer again :-/
Good day,
The hardware controller sends out the signal, but it does not process your telemetry; this must be implemented by the manufacturer, otherwise there is no solution.
Kind regards / Best regards
Aleks Stefanovic
Please always reply with the complete correspondence.
-----------------------------------------
Robitronic Electronic Ges.mbH
Pfarrgasse 50
1230 Vienna
Austria
Hier die Antwort :-) ??? Wer war da noch der Hersteller :-/
Guten Tag,
der HW-Regler sendet das Signal aus nur verarbeitet es Ihre Telemetrie nicht, diese muss vom Hersteller implementiert werden sonst gibt es keine Lösung.
Mit freundlichen Grüßen / Best Regards
Aleks Stefanovic
Bitte immer mit komplettem Schriftverkehr antworten / please answer always with whole correspondence
-----------------------------------------
Robitronic Electronic Ges.m.b.H.
Pfarrgasse 50
1230 Wien
Austria
RV
11 March 2026 17:0811.03.2026 17:08
They're funny...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Die sind ja lustig ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Teci
11 March 2026 18:0111.03.2026 18:01
Yes, that's a strange answer; it's already mentioned in the description of the 150A V5.1.
Technical data:
Continuous/Peak Current: 150A/180AA
Number of cells: 3-8S
BEC voltage: 5 - 12V @ 10A (switch mode)
BEC current continuous/peak: 10A / 30A
Cable battery/motor 1x 10AWG (red and black each)
3x 12AWG (black)
Battery/motor connector: 4mm gold contact connector
Telemetry function
Mikado VBar, Futaba S.Bus2, etc.
Do you have the new or old Progbox? With my V5.1 controller, it still works with the old box when using USB Link 5.1.
You might want to contact Hobbywing support; the 4.1xxx-VBar firmware should appear in the selection menu.
Vg
Edited once. Last edited on 11/03/2026 at 18:01 by Teci.
Ja das ist eine seltsame Antwort in der Beschreinbung vom 150A V5.1 steht es ja mit drin
Technische Daten:
Strom Dauer/Spitze: 150A/180AA
Zellenzahl: 3-8S
BEC Spannung: 5 - 12V @ 10A (Switch-Modus)
BEC Strom Dauer/Spitz: 10A / 30A
Kabel Akku/Motor 1x 10AWG (je rot, schwarz)
3x 12AWG (schwarz)
Stecker Akku/Motor: 4mm Goldkontaktstecker
Telemetrie-Funktion
Mikado VBar, Futaba S.Bus2, etc.
hast du die neue oder alte Progbox, bei meinen V5.1 Regler geht das mit der alten Box noch wen man USB Link 5.1 nutz.
Eventuell mal Hobbywing Support kontaktieren, im Auswahlmenue zur Firmware sollte die 4.1xxx-VBar auftauchen
Vg
1 mal bearbeitet. Zuletzt am 11.03.2026 18:01 von Teci.
DirkBergmeier
11 March 2026 18:5411.03.2026 18:54
It's the old LCD Program Box Pro and I still have the HW30850400 OTA WIFI.
I'm waiting for a reply from
Support2@hobbywing.com .
If Hobbyking is advertising with Mikado, then they should at least put in some effort.
I've done everything I can or tried everything. I think it's due to the hardware software.
Best regards from the Volcanic Eifel region
Dirk
Ist die alte, LCD Programm Box Pro und habe noch die HW30850400 OTA WIFI.
Warte jetzt erstmal auf Antwort, vom
Support2@hobbywing.com.
Wenn Hobbyking mit Mikado wirbt, dann sollen diese sich auch mal Mühe geben.
Von meiner Seite habe ich alles gemacht oder Versucht, Denke es liegt an der Software von HW.
Beste Grüße aus der Vulkaneifel
Dirk
RV
11 March 2026 20:4311.03.2026 20:43
Please take a picture of the Progbox
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mach mal bitte ein Foto der Progbox
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
DirkBergmeier
11 March 2026 21:0911.03.2026 21:09
Hi Rainer, you're welcome :-)
Regards, Dirk
Hi Rainer, gerne :-)
Gruß Dirk
RV
11 March 2026 22:3111.03.2026 22:31
This is ONLY the programming box.
The Pro looks like this...
Regards (EN) / Greetings (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Please use a PC and a proper keyboard for posts and replies, and answer all questions completely. Take your time and answer follow-up questions thoroughly and completely.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For individual communication, please use email exclusively ! - Private messages, messenger, chat, etc. will not be processed.
For single user communication please send an email only ! PM, Messenger, Chat etc. won't be read.
Das ist NUR die Prog Box.
Die Pro sieht so aus ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Teci
12 March 2026 06:5812.03.2026 06:58
If you have the OTA WiFi module, try using that; it works quite well.
Wen du das OTA Wifi Modul hast versuche es doch mal damit das geht auch ganz gut
steveman
12 March 2026 20:3312.03.2026 20:33
When I update using the OTA module (I don't have anything else), there is no separate vBar firmware.
The Hobbywing app works on the vbar, though. I can adjust the BEC voltage, for example.
I thought I could change all the parameters of the controller, like the startup time or something. That's not possible.
Telemetry works on my JE Platinum 150A 5.1
Regards, Stefan
Wenn ich mit dem ota Modul Update (was anderes habe ich nicht) gibt es auch keine eigene vbar Firmware.
Die Hobbywing App funktioniert aber auf der vbar. Bec Spannung kann ich z.b verstellen.
Dachte nur, dass ich alle Parameter des Reglers ändern könnte, z.b. hochlaufzeit oder so. Das geht nicht.
Telemetrie funktioniert bei meinem je platinum 150a 5.1
Lg Stefan
Teci
13 March 2026 07:4413.03.2026 07:44
You can't adjust everything with the app, but you can adjust the most important things.
When you press the Expert button, part of the settings appears; if you hold the button down, a second menu with the remaining values appears.
VG
Edited once. Last edited on 13.03.2026 at 07:44 by Teci.
Alles kann man mit der APP nicht einstellen aber das wichtigste.
Wen du die Expert Schaltfläche drückst kommt ein Teil der Einstellungen, wen du die Schaltfläche gedrückt halltest kommt ein 2. Menu mit den Restlichen Werten.
VG
1 mal bearbeitet. Zuletzt am 13.03.2026 07:44 von Teci.
DirkBergmeier
13 March 2026 07:4913.03.2026 07:49
I am patiently waiting for HW's reply, then I will get back to you.
Regards, Dirk
Ich warte geduldig auf die Antwort von HW, melde mich dann.
Gruß Dirk
Norb_HCHH
31 March 2026 18:5831.03.2026 18:58
Are you using the original Hobbywing cable, and did you definitely connect it the right way round? If GND and signal are reversed, nothing will reach the stabilizer. This happened to me once with the 120 V4; the telemetry cable was reversed 180 degrees in terms of pinout, with ground pointing towards the outside of the housing. With the 5.1 150A, ground and signal are wired exactly the same as the ESC and AUX cables. With my M7, the 180 V5 HV worked directly without having to reinstall anything on the VBC Evo+.
Regards, Norbert
Nutzt du denn das Originale Hobbywing Kabel und hast du es auch wirklich richtig rum angeschlossen? Wenn GND und Signal vertauscht sind kommt nix im Stabi an ist mir beim 120er V4 mal passiert dort ist nämlich das Telemetrie Kabel um 180 gedreht was die Belegung angeht Ground zeigt zu Gehäuse Außenseite. Beim 5.1 150A ist es wieder so das Gound und Signal genau so belegt sind wie ESC und AUX Kabel.Beim meinem M7 hat mit dem 180er V5 HV direkt funktioniert ohne etwas neu installieren zu müssen auf der VBC Evo+
Gruß, Norbert
DirkBergmeier
6 June 2026 10:4106.06.2026 10:41
Hello everyone.
Thank you so much for all the tips!
I forgot to tell you where the mistake was, sorry.
Everything was connected correctly; the problem was with the Hobbywing telemetry cable (telemetry connection to the NEO), which was new but had a defect.
What was I looking for to find the error? That's when I first figured it out.
I wish you a pleasant flight in summer 2026.
LG
Dirk
Hallo@ all.
Vielen lieben Dank für die vielen Hinweise!
Hatte es vergessen euch mitzuteilen wo der Fehler lag, Sorry.
Es war alles richtig angeschlossen, es lag an dem Hobbywing Telemetrie Kabel (Tele-Anschluss zum NEO) welches neu war aber ein Defekt hatte.
Was hatte ich gesucht um den Fehler zu finden, da komm erstm. darauf.
Ich Wüsche euch einen schönen Flug Sommer 2026.
LG
Dirk