UweW
1 February 2026 14:5201.02.2026 14:52
Hello, I've installed a Benedini sound module with the original sound in my Roban AS350 helicopter. Please, no discussion about the pros and cons of turbine sounds in electric scalers :-) .
According to the description for learning the sound, the TBS Mini V2 module from Thomas B. is programmed to the operating mode "direct sound selection".
The module is supposed to be connected via the throttle channel and then calibrated using the throttle stick. But since I'm flying with a linear throttle input, that doesn't work.
My idea is to send the pitch signal to the sound module, not the throttle, since the throttle doesn't change. I'm using an EVO as my VBar.
I've attached the programming description, perhaps for better understanding.
Can someone give me a hand or do you have another suggestion?
Regards, Uwe
Hallo, habe in meinem Heli AS350 von Roban ein Benedini Soundmodul mit originalen Sound eingebaut. Über Sinn oder Unsinn vom Turbinensound im Elektroscaler bitte aber nicht diskutieren :-) .
Laut Beschreibung zum Anlernen des Sound, ist das Modul TBS Mini V2 vom Thomas B. auf die Bedienart "direkte Soundanwahl" programmiert.
Das Modul soll über den Gaskanal eingeschleift werden und wird dann über den Gasknüppel angelernt. Aber da ich ja eine Gasgerade fliege, geht das nicht.
Meine Idee wäre das Pitch Signal zum Soundmodul zu schicken und nicht das Gas, da Gas sich ja nicht verändert. Als VStabi verwende ich ein EVO.
Ich habe mal die Beschreibung der Programmierung angehangen, zum besseren Verständnis vielleicht.
Kann mir jemand auf die Sprünge helfen oder habt ihr einen anderen Vorschlag?
Gruß Uwe
RV
1 February 2026 15:1401.02.2026 15:14
Pitch to an output, e.g. AUX2:
Macrocell channel, input collective (pitch). Done.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Pitch an einen Ausgang, z.B. AUX2:
Makrozelle Kanal, Eingang Collective (Pitch). Fertig.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
UweW
3 February 2026 17:4403.02.2026 17:44
Hello Rainer,
Thanks for the info! It's simple, you just have to know it!
But I have another question, don't laugh.
I want to activate the sound module using 3-way switch No. 2. I have programmed AUX3 macro cell channel, input Sw2.
Unfortunately, no matter which position the switch is in (-100, 0, +100), the sound module starts working immediately when powered on! If I unplug the cable from AUX3, nothing happens! What do I need to adjust to make the switch work for this option?
Thanks!
Hallo Rainer,
danke für die Info! Einfach, man muss es nur wissen!
Aber ich habe noch eine Frage, nicht lachen.
Möchte das Soundmodul per 3 Fachschalter Nr. 2 aktivieren. Habe AUX3 Makrozelle Kanal, Eingang Sw2, programmiert.
Leider egal in welche Stellung der Schalter steht, -100 0 +100, das Soundmodul läuft sofort, wenn mit Strom versorgt, an! Wenn ich das Kabel bei AUX3 abziehe, passiert nichts! Woran muss ich drehen, das der Schalter funktioniert für diese Option?
Danke!
RV
3 February 2026 18:4803.02.2026 18:48
The MC input is not SW2 - but Option 2.
You need to check in the switch settings which option (1, 2, 3) is assigned to the physical SW2 - that will be the input.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Der MC Eingang ist nicht SW2 - sondern Option 2.
Du musst mal in den Schaltereinstellungen nachsehen welcher Option (1,2,3) der physikalische SW2 zugewiesen ist - das ist dann der Eingang.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.