steveman
28 December 2025 12:3828.12.2025 12:38
Hi. I fly my vbar Control evo Omp m2 helicopters. Up until now, I've always used the 6-channel receiver with the small connectors. But it seems that one is no longer available.
Can the small new satellite receiver also be used for this purpose and connected to the ofs3 with an adapter cable?
Regards, Stefan
Hi. Ich fliege mit meiner vbar Control evo Omp m2 Helis. Bis jetzt hatte ich immer den 6kanal Empfänger mit den kleinen Steckern in Betrieb. Den scheint es aber nicht mehr zu geben.
Kann man den kleinen neuen satellitenempfänger auch dazu verwenden und mit einem Adapterkabel am ofs3 anschließen.
Lg Stefan
RV
28 December 2025 20:3428.12.2025 20:34
No, he only issues our Interbus tickets.
But there's something in the pipeline that meets your needs... as the drums say ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Nein, er gibt nur unseren Interbus aus.
Aber da ist was in der Pipeline für Deine Bedürfnisse ... sowie die Trommeln sagen ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
steveman
28 December 2025 21:2728.12.2025 21:27
That sounds very promising.
Then I'll wait and see. Best regards and thank you, Stefan
Das klingt ja mal vielversprechend.
Dann warte ich mal ab. Lg und Dankeschön, Stefan
thomas1130
29 December 2025 08:1429.12.2025 08:14
Great news - or at least "rumors" :-) 8-)
That would be really great!
LG
Tolle Neuigkeiten - oder zumindest "Gerüchte" :-) 8-)
Wäre echt super
LG
steveman
2 January 2026 22:0302.01.2026 22:03
Is there an approximate date when we can expect the small receivers to arrive? Best regards, Stefan
Gibt es da ein ungefähres Datum bis wann man mit den kleinen Empfängern rechnen kann? Lg Stefan
Eddi E. aus G.
5 January 2026 09:2805.01.2026 09:28
Hello and a Happy New Year!
Not yet. We'll take a look once the machines (including those at our suppliers) are running again.
Now... first, inventory :-) what must be, must be.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin und ein gutes Neues,
noch nicht. Sobald die Maschinen (auch bei unseren Zulieferern) wieder angelaufen sind, schau'n wir mal.
Jetzt ... erst mal noch Inventur :-) wat mut dat mut.
Grüßle
Eddi
Born to fly ...
forced to work.
steveman
5 January 2026 11:3005.01.2026 11:30
Happy New Year to you all as well.
Here's to a promising, news-filled new year.
Regards, Stefan
Euch allen auch ein gutes neues Jahr.
Auf ein vielversprechendes, newsbringendes neues Jahr.
Lg Stefan
threedeerigid
20 January 2026 09:1120.01.2026 09:11
I'll jump in here too, as I'll probably need one as well. I still have two old ones in use.
Best regards
Nicole
Always leave a hand's breadth of space under the rotor :-)
Da hänge ich gleich mal mit dran, ich benötige nämlich wahrscheinlich auch einen. 2 alte habe ich noch im Einsatz.
Liebe Grüße
Nicole
Immer eine Handbreit Luft unter dem Rotor :-)
Orpheus
23 January 2026 12:3623.01.2026 12:36
I'm really looking forward to the new generation of small receivers. :-)
And whether these will arrive promptly at the start of the 2026 flying season, or whether we'll have to wait forever again... :-) , 2027-28-...30 :-/
It would also be desirable if this new generation, unlike the old RX6 Only which was still on the NEO platform, had not just a standard S-Bus but an invertible output capable of telemetry, finally supporting the protocols of OMP OSF3 or Goosky modules. And if Mikado took the initiative to integrate and release telemetry functionality within their ecosystem.
My view is that the new Logo 200 V8 2025, although it has now been upgraded with the new EVO Micro and new telemetry-capable ESC, can at least keep up with the competition, which is now putting on a lot of pressure.
However, the actual mechanics of the original Logo 200 remained stuck in the age of dinosaurs and did not make the evolutionary leap into modern times.
It's better to at least be at the forefront with the new generation of receivers and make them interesting for us customers, even if we fly other products besides Mikado, and above all, to stay in business with sufficient sales volume. Rather than relying solely on the (let's say) "own" Logo 200.
Because if Mikado misses this opportunity, more and more customers will switch brands sooner or later. As you can see from the trend, many have already switched to other models, moving away from the Logo 200 series (since there aren't any others yet).
If so, I can imagine that many will switch to other remote control systems, as these offer significantly more performance. And, without mentioning any specific manufacturer, I should mention that they have just introduced a future-proof transmitter in their MK3 series at a very reasonable price.
You guys shouldn't take this as criticism, but rather as constructive encouragement to stay on top of things and remain interesting for us Mikado customers :-)
So, as mentioned at the beginning, I am very excited to see what the new generation of receivers will be able to do and when we can install them in our models and fly them.
Until then, so long, best regards from a pilot
Edited once. Last edited on 23.01.2026 at 13:27 by Orpheus.
Da bin ich auch schon sehr gespannt auf die neue kleine Empfängergeneration. :-)
Und ob diese dann zeitnahe zu Anfang der Flugsaison 2026 kommen oder ob wir wieder ewig drauf warten dürfen ... :-) , 2027-28-...30 :-/
Auch wünschenswert wäre wenn diese neue Generation , die alte RX6 Only war noch auf der NEO Plattform, dann nicht nur einen gewöhnlichen S-Bus hätte sondern einen invertierbaren Ausgang der dann telemetrie fähig ist und endlich auch die Protokolle von OMP OSF3 oder Goosky Modulen unterstützen. Und Mikado sich einen Stoss gibt und die Telemetrie in ihr Mikado Ökosystem einbinden und freigeben.
Ich sehe das so das der neue Logo 200 V8 2025 obwohl er mittlerweile mit dem neuen EVO Micro und neuem telemetriefähigen ESC aufgewertet wurde und zumindest mal so mit der Konkurrenz, die mittlerweile starken Druck macht, mithalten kann.
Jedoch ist die eigentliche Mechanik des Ur-Logo 200 in der Epoche der Dinosaurier zurückgeblieben und hat den Evolutionssprung in die Neuzeit nicht geschafft.
Besser ist es zumindest mit der neuen Generation Empfänger vorne mitzumischen und diese für uns Kunden, auch wenn wir andere Produkte als Mikado fliegen, interessant zu machen und vor allem auch im Geschäft zu bleiben mit genug Absatz durch verkaufte Stückzahlen. Als nur auf den (sagen wir’s mal so) „eigenen“ Logo 200 zu setzen.
Denn wenn Mikado diesen Sprung (auch) verpasst werden auf kurz oder lang immer mehr Kunden das Lager wechseln. Wie man den Trend verfolgen kann sind sehr viele bereits übergelaufen was die Modelle betrifft, also weg von Logo ..200. (andere gibt es ja (noch) nicht ).
Wenn dann kann ich mir vorstellen, dass auch sehr viele auf andere Fernsteuersysteme ausweichen werden, denn diese bieten schon sehr viel Leistung. Und auch um keinen Hersteller namentlich zu erwähnen, der gerade einen zukunftsicheren Sender der MK3 Serie vorgestellt hat, um sehr günstiges Geld.
Das sollt ihr Jungs jetzt nicht als Kritik verstehen sondern als einen konstruktiven Ansporn am Ball zu bleiben und für uns Mikadokunden interessant zu bleiben :-)
Also, wie zu Anfang schon erwähnt bin ich schon sehr gespannt was die neue Empfänger Generation alles können wird und wann wir sie in unsere Modelle einbauen und fliegen können.
bis dahin , so long , beste Fliegergrüsse
1 mal bearbeitet. Zuletzt am 23.01.2026 13:27 von Orpheus.
steveman
1 February 2026 11:0301.02.2026 11:03
Bringing the receivers to market in a timely manner is certainly important.
As you also mentioned, there are other manufacturers who are really pushing the boundaries. For example, the OFS3+ now even has a receiver integrated for a specific manufacturer.
I'm still a self-confessed Mikado fan and only recently switched to the Vbar Control evo. However, Mikado really needs to get moving to stay competitive.
Regards
Zeitnahe die Empfänger auf den Markt bringen ist sicher wichtig.
Wie du auch schreibst gibt es andere Hersteller die wirklich extrem Gas geben. Wenn ich auf das ofs3+ denke, da ist jetzt neu sogar ein Empfänger für einen bestimmten Hersteller integriert.
Ich bin aber immer noch bekennender Mikadofan und bin erst vor kurzem auf die Vbar Control evo umgestiegen. Allerdings muss Mikado wirklich in die Gänge kommen um am Ball zu bleiben.
Lg
Orpheus
3 February 2026 14:1303.02.2026 14:13
Hello Steveman!
I completely agree with you, I'm also a Mikado fan and will remain one because it's a really good system and the guys are doing a good job.
My criticism isn't meant to be malicious, but is simply intended to point out that they shouldn't fall behind other manufacturers who are pretty much on the fast track.
Some of the things that are currently happening at Mikado aren't exactly making them popular.
Attracting new customers will be difficult, and relying solely on die-hard fans won't improve things in the long run.
As can be observed, two manufacturers, who are also cooperating, are currently in the process of thoroughly shaking up the market.
So our guys should stay on top of things with new products and ideas, and above all, focus more on the German-speaking target group again and not commit to customers across the pond. That's my opinion.
That's why I'm already curious about this "new" micro receiver and whether it will also include certain telemetry protocols, because that's at least one reason for all VBar Control (Touch/EVO/ECO+) owners to stick with Mikado. Even if they want to operate other small helicopters and, for whatever reasons we know, the Logo 200 isn't so interesting anymore.
But with a receiver like this, which would provide telemetry and is future-proof, Mikado would at least retain its customer base with its remote control system and not switch to other manufacturers. The guys at Mikado should be aware of that.
My criticism is well-intentioned and should not be misunderstood.
Regards
Hallo Steveman!
Da bin ich ganz bei dir, ich bin auch Mikado Fan und werde es bleiben, weil es ein wirklich gutes System ist und die Jungs einen guten Job machen.
Meine Kritik ist ja nicht böse gemeint, sondern soll nur darauf hinweisen dass sie nicht den Anschluss verpassen gegenüber anderen Herstellern , die ziemlich auf der Überholspur sind.
So manches wie es jetzt gerade bei Mikado läuft macht sich halt nicht gerade beliebt.
Neue Kunden damit fangen wird schwer und nur mit eingefleischten Anhängern wird es auf Dauer auch nicht besser werden.
Wie man beobachten kann sind gerade zwei Hersteller, die auch zusammen kooperieren, gerade dabei den Markt gründlich aufzurollen.
Also sollten unsere Jungs da am Ball bleiben mit neuen Produkten und Ideen und vor allem wieder mehr in die deutschsprachige Zielgruppe setzen und sich nicht auf Kunden übern großen Teich festlegen. Das ist meine Meinung.
Darum bin ich schon auf diesen „neuen“ Mikro Empfänger gespannt und ob dieser dann auch gewisse Telemetrie Protokolle enthält, denn das ist zumindest für alle VBar Control (Touch/EVO/ECO+) Besitzer dann auch ein Grund bei Mikado zu bleiben. Auch wenn diese andere kleine Helis betreiben wollen und aus welchen uns bekannten Gründen der Logo 200 nicht mehr so interessant ist.
Aber mit so einem Empfänger der einem dann die Telemetrie liefern würde und zukunftsorientiert ist bleibt Mikado wenigstens der Kundenstamm mit dem Fernsteuerungssystem treu und wechselt nicht zu anderen Herstellern. Das sollte den Jungs von Mikado klar sein.
Also meine Kritik ist nur gut gemeint und sollte nicht missverstanden werden.
Lg
steveman
28 February 2026 11:3028.02.2026 11:30
With new small helicopters now on the market, it would be great if Mikado didn't miss the opportunity to bring their small receivers to market. Many of our users are already switching from vbar to another manufacturer.
Da jetzt neue kleine Helis am Markt sind, wäre es super wenn Mikado es nicht verschlafen würde, die kleinen Empfänger auf den Markt zu bringen. Bei uns steigen schon viele von vbar auf einen anderen Hersteller um.
Max8200
28 February 2026 12:0128.02.2026 12:01
The idea of doing the same has been growing in me for the past few days. But actually, I don't want to.
I only switched to Mikado last year and I think the system is great, but I also enjoy flying micro helicopters in the garden :-)
Come on, Mikado, it can't be that difficult to design a small, new SBUS receiver. No need to reinvent the wheel :-)
Der Gedankengang das ebenfalls zu tun ist seit ein paar Tagen auch bei mir gewachsen. Eigentlich will ich das aber nicht.
Bin erst letztes Jahr zu Mikado gewechselt und finde das System toll, fliege aber auch gerne Micro Heli im Garten :-)
Kommt schon Mikado, so schwierig kann das doch nicht sein nen kleinen, neuen, SBUS RX zu konstruieren. Man muss das Rad ja nicht neu erfinden :-)
Eddi E. aus G.
4 March 2026 09:1304.03.2026 09:13
...is almost finished...
Grüßle
Eddi
Born to fly ...
forced to work.
... ist ja schon fast fertig ...
Grüßle
Eddi
Born to fly ...
forced to work.
steveman
6 March 2026 18:5606.03.2026 18:56
Max8200
17 March 2026 12:2617.03.2026 12:26
Any news yet? I'm eagerly awaiting it :-) :-) :-)
Gibts hier schon News? Ich warte sehnsüchtig :-) :-) :-)
Eddi E. aus G.
17 March 2026 12:3317.03.2026 12:33
Hi,
Unfortunately, yes... :-) Something seems to have gone wrong during the circuit board manufacturing, but I don't know exactly what that means in terms of time.
Grüßle
Eddi
Born to fly ...
forced to work.
Huhu,
leider ja ... :-) bei der Platinen-Fertigung ist scheint's was schief gelaufen, weiß aber nicht genau, was das jetzt zeitlich bedeutet.
Grüßle
Eddi
Born to fly ...
forced to work.
steveman
18 March 2026 19:1018.03.2026 19:10
…another setback. What a shame.
…wieder ein Rückschlag. Schade
Max8200
18 March 2026 19:2518.03.2026 19:25
If things don't work out at the golden harp anymore, I'll apply for a Quality Manager position at Mikado; I think it's worth it :-)
Wenn das bei der goldenen Harfe mal nichts mehr gibt, bewerbe ich mich als Quality Manager bei Mikado, ich denke das lohnt sich :-)
Eddi E. aus G.
19 March 2026 08:5319.03.2026 08:53
Good morning,
The supplier would have a need for it ^^
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
der Zulieferer hätte eher Bedarf ^^
Grüßle
Eddi
Born to fly ...
forced to work.
Bernd S.
21 March 2026 08:2321.03.2026 08:23
A mini receiver like that would also be on my wish list.
And – stick with it – don't become like MPX :-)
Have a nice weekend !
Bernd
So´n Miniempfänger wäre bei mir auch auf der Wunschliste.
Und - dran bleiben - nicht wie MPX werden :-)
Schönes Wochenende !
Bernd
Orpheus
25 March 2026 13:0125.03.2026 13:01
Hi Eddi,
Is there any news regarding the new micro receivers?
Were the production difficulties resolved?
Greetings, Dietmar
Moin Eddi,
gibt es schon Neuigkeiten bezüglich der neuen Microempfänger?
Konnten die Produktionsschwierigkeiten behoben werden?
Grüßle , Dietmar
Eddi E. aus G.
25 March 2026 13:2825.03.2026 13:28
Work in progress.
They need to be manufactured anew, or are being manufactured anew – circuit board, assembly, etc.
'As soon as possible' :-)
—Eddi
Born to fly ...
forced to work.
Work in progress.
Die müssen halt neu produziert werden bzw. werden neu produziert, Platine, bestücken etc. pp. ...
'So schnell wie möglich' :-)
—Eddi
Born to fly ...
forced to work.
Orpheus
25 March 2026 13:3525.03.2026 13:35
Sounds like they won't be coming anytime soon.
The main thing is that they come and fulfill all our hopes :-)
Greetings, Dietmar
Klingt so als würden sie noch nicht so schnell kommen.
Hauptsache sie kommen und erfüllen all unsere Hoffnungen :-)
Grüßle Dietmar
Eddi E. aus G.
25 March 2026 14:4725.03.2026 14:47
I'll just say it like it is, I have no idea :-) except that they're somehow back in production somewhere and will be coming...
Born to fly ...
forced to work.
Ich sag's einfach wie's ist, ich hab keine Ahnung nicht :-) außer dass sie irgendwo irgendwie wieder in Arbeit sind und kommen werden ...
Born to fly ...
forced to work.