← VBar Control Touch / EVO

Kontronik Kosmik translated

VBar Control › VBar Control Touch / EVO · Started by bikeschmid on 15 November 2025 21:2415.11.2025 21:24
bikeschmid 15 November 2025 21:2415.11.2025 21:24
Hello,
I want to adjust a Kosmik 160 HV controller using the VBAR Touch.
However, when I go into settings mode via the app, the fields are grey.
They are stored and cannot be selected.
How do I access the settings?

Thank you for the tip!
machine-translated from German · Show original
Dirtygeri 16 November 2025 08:4316.11.2025 08:43
Motor switch ON? ... must be OFF ...
machine-translated from German · Show original
RV 16 November 2025 10:3116.11.2025 10:31
External TelMe? - It can't do it...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
bikeschmid 16 November 2025 12:4016.11.2025 12:40
Thanks Rainer, yes, an external TelMe is installed.
Best regards
machine-translated from German · Show original
JMalberg 16 November 2025 19:0016.11.2025 19:00
External TelMe is a one-way street (can only speak, but doesn't listen :-) )

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless