← VBar Control Touch / EVO

Timeout message in the log? translated

VBar Control › VBar Control Touch / EVO · Started by tc1975 on 31 October 2025 21:2731.10.2025 21:27
tc1975 31 October 2025 21:2731.10.2025 21:27
Hello,
Today, after my third flight – out of a total of five – I received a message in the log that I hadn't seen or heard of before: Test mode timeout.
What does that mean?
Regards, Timo

machine-translated from German · Show original
RV 31 October 2025 22:5231.10.2025 22:52
Please download the entire log from the cloud and copy it here. We need the context.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 31.10.2025 22:53 von RV.
machine-translated from German · Show original
tc1975 1 November 2025 12:3901.11.2025 12:39
Here you go: Vstabi EVO SN: 27002321

31.10.2025 13:56:08
31.10.2025 14:09:07
00:06:41
5000 mAh
50.2 V
C uses:
3818 mAh
41.7 V
44.3 V
134.8 A
6267 W

And here is the event log:
10/31/2025 1:56:09 p.m.;VBar Start -- Goosky RS7 -- 0027002321 -- V 8.1 -- pl 36
31.10.2025 13:56:09 Good; Cold start
31.10.2025 13:56:10 Good; Reset Reason: Power On
31.10.2025 13:56:10 Good; Bank 1 loaded
31.10.2025 13:56:11 Good; Bank 3 loaded
31.10.2025 13:56:13 Good; Calibration complete
31.10.2025 13:56:15 Good; YGE controller detected
10/31/2025 1:56:18 PM Good;Top 5 battery choice: SLS 12S 5000 40C
31.10.2025 13:58:27 Good; Bank 1 loaded
31.10.2025 13:58:28 Good; Bank 2 loaded
31.10.2025 13:58:44 Good; Bank 2 loaded
31.10.2025 13:58:45 Good; Bank 4 loaded
31.10.2025 13:58:45 Info; Speed controller switched ON
31.10.2025 13:58:45 Good; Engine switch Idle Start
31.10.2025 13:58:45 Good; Motor switch Motor On
31.10.2025 14:02:12 Good; Bank 1 loaded
31.10.2025 14:02:19 Good; Bank 2 loaded
31.10.2025 14:02:21 Good; Bank 3 loaded
10/31/2025 2:04:34 PM Info;Off - Controller - Umin:42.1V Imax:134.8A Temp:24?
31.10.2025 14:04:34 Good; Bank 4 loaded
31.10.2025 14:04:34 Info; Speed controller switched to OFF
31.10.2025 14:04:35 Info; Speed controller switched to idle
31.10.2025 14:04:35 Good; Motor switch Motor Off
31.10.2025 14:04:35 Good; Engine switch Idle Start
Oct 31, 2025 2:04:49 p.m. Info;Test mode timeout
31.10.2025 14:04:53 Good; Bank 2 loaded
31.10.2025 14:05:34 Good; Bank 4 loaded
31.10.2025 14:05:34 Good; Engine switch Idle Start
31.10.2025 14:05:34 Good; Bank 2 loaded
31.10.2025 14:05:35 Info; Speed controller switched ON
31.10.2025 14:05:35 Good; Motor switch Motor On
31.10.2025 14:06:25 Good; Bank 4 loaded
31.10.2025 14:06:25 Warning; YGE power limit reached
31.10.2025 14:06:26 Info; Speed controller switched to OFF
10/31/2025 2:06:26 PM Info;Off - Controller - Umin:41.7V Imax:131.9A Temp:25?
31.10.2025 14:06:26 Good; Motor switch Motor Off
31.10.2025 14:06:29 Good; Bank 1 loaded
31.10.2025 14:09:05 Good; YGE Controller Separated
10/31/2025 2:09:07 PM;VBar Logfile End -- 10/31/2025 -- 2:09:07 PM

Regards, Timo



Edited once. Last edited on 01/11/2025 at 12:44 by tc1975.
machine-translated from German · Show original
RV 1 November 2025 23:3101.11.2025 23:31
Hmm... I can't make sense of that. Test mode would be the settings mode - which wasn't even activated (you can't fly in that mode).

I suspect it was supposed to be a different message - but a bit in the message has gone wrong.

I'll have to ask Uli about that...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
ulrich 2 November 2025 09:5202.11.2025 09:52
Congratulations, you've found a bug ;-) . This is a relic from the old serial days before USB, used to detect when the cable is disconnected. A test mode (settings menu) would then automatically deactivate after a certain period. This safety mechanism is no longer used since USB, but I haven't completely removed it.
You can ignore the message; I will remove the unnecessary code for future use.

So long... Uli
http://www.vstabi.de
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless