I have a brand new vcontrol evo + with the yge app and a new yge 65LVT. As soon as everything powered on the v control immediately recognized the esc and I was able to go in and set the gov to vcontrol in the yge app and open the gov page in vcontrol, set gear ratio, pole count etc.
In the advanced settings I selected slow start, motor timing, and thats it
Do we not need to set endpoints anymore or callibrate collective range? I flipped off throttle hold to check direction and it was a silky smooth slow start that ramped up to my idle 3 setpoint of 2800 (450 sized heli) i feel like it was too easy! Lol.
So my checklist was
Yge app:
-direction
-timing
-gov type
Vbar gov
-gear ratio
-pole count
-gov type
Model parameter
-headspeed for each position
In the advanced settings I selected slow start, motor timing, and thats it
Do we not need to set endpoints anymore or callibrate collective range? I flipped off throttle hold to check direction and it was a silky smooth slow start that ramped up to my idle 3 setpoint of 2800 (450 sized heli) i feel like it was too easy! Lol.
So my checklist was
Yge app:
-direction
-timing
-gov type
Vbar gov
-gear ratio
-pole count
-gov type
Model parameter
-headspeed for each position