helinutz
7 April 2026 11:5107.04.2026 11:51
Trying to help a friend sort out why his VBar Control touch is not sending info to the cloud.
Its my old transmitter (11000410) that he now owns, and pretty sure we did a full reset on it when it was transferred over to his account.
The TX has online services and cloud services activated and also stores the flights locally in the Tx, just nothing in the cloud.
Any suggestions?
Regards
Phil
Edited 1 time(s). Last edit at 04/07/2026 11:52AM by helinutz.
Eddi E. aus G.
7 April 2026 13:4007.04.2026 13:40
Hi Phil,
can you please try the following:
. enable USB Stick Mode in Settings
. connect to a Windows Computer
. right-click the removable volume VCONTROL
. select Properties, tools
. do a file system check and repair
. then, select all the files and folders
. right-click, Properties again, Advanced
. Check the boxes so Files can be Archived, allow recursive so all sub-folders and files therein will also be marked for Archiving again
! don't forget to Remove/Eject the volume from Windows Explorer, don't just disconnect USB
. disable USB Stick Mode in Settings
. wait for it
Kind regards
Eddi
Born to fly ...
forced to work.
helinutz
7 April 2026 17:4607.04.2026 17:46
So ran the check and repair and after the bar was about halfway it came up with “there was a problem repairing this drive” error and locked up the pc
helinutz
7 April 2026 18:0307.04.2026 18:03
Can the drive be formatted to wipe all the data and then rebuild the file structure it needs or is that not an option
helinutz
7 April 2026 18:4107.04.2026 18:41
the repair, although we got the error message might have been successful as we are now getting model "flights" showing. Will test further with other models to make sure its all working
Eddi E. aus G.
8 April 2026 08:5308.04.2026 08:53
Hi again,
good it's working again!
Yes, you could format the drive, from the computer first, then best also from the diagnostic screen which comes up on the transmitter.
Then, you can run the Update from there, if you have WiFi, or via USB and VBar Control Manager (scroll one page down on the diagnostic screen, to enable).
But be aware that you have to re-do the whole transmitter setup, including stick calibration, switch assignments, double-check with models connected that special functions like Rescue or Throttle cut or that are assigned again and work as expected.
Also, there's data loss possible, everything which is not yet backed up into the cloud will be lost.
We don't recommend formatting, or only as a last resort.
Best,
Eddi
Born to fly ...
forced to work.