Fisc
25 August 2025 23:5125.08.2025 23:51
Hi, just installed a brand new Tribunus III with my Neo.
The problem i have is that no matter what i do, i cant get the scorpion app to show on my VBCt.
I know my wiring is correct and i have tried updating both the Neo, VBC and esc.
The app is installed on the controller.
When i installed my HW 260 v5 on my logo 700 everything worked right out of the box.
I appriciate any help!
Thanks!
Vinger
26 August 2025 05:5326.08.2025 05:53
Hi
Do you have the telemetry cable correctly plugged in, PC Port on ESC to Teleport on the Neo?
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
RV
26 August 2025 06:2826.08.2025 06:28
As Peter said - but also check the other side on ESC for correct orientation.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
As Peter said - but also check the other side on ESC for correct orientation.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Fisc
26 August 2025 10:3126.08.2025 10:31
Thanks guys, had the telemetry cable plugged into the ”fan” port of the esc.
RV
26 August 2025 11:2426.08.2025 11:24
:-)
Welcome to the Club 8-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 08/26/2025 11:24AM by RV.
:-)
Welcome to the Club 8-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 08/26/2025 11:24AM by RV.
Eddi E. aus G.
27 August 2025 08:5227.08.2025 08:52
Hi,
so much for
Quote:I know my wiring is correct
:-)
Guess we've all been there ...
But it's _so_ important to double-check and make sure ... e.g. if you manage to connect r/c voltage to a TELE port, you instantly fry the VBar.
I guess that happens not so rarely, and then the VBar is 'DOA' but actually it was played kaput :-/
—Eddi
Born to fly ...
forced to work.
Khalid Safdar
1 June 2026 12:5601.06.2026 12:56
Hi: I have done everything and am still not getting the telemetry on my Vcontrol Classic.
1. The master plugged in the Vbar EVO in the ESC port
2: Slave in the RPM port
3. Telemetry cable from PC port to Teleport
4. The communication protocol in Scorpion Tribune's III 220A is already on Vbar communication
5. In the Heli Setup wizard of the control classic the icon of tribunus keeps showing a QR code of the page with the same instructions but it doesn't go any further from there.
6. The polarity of the cable is also double checked with the picture on the ESC
I am at loss to understand what I am doing wrong. Can somebody please help.
Thanks
Khalid
Khalid Safdar
1 June 2026 12:5701.06.2026 12:57
There is no icon on the screen of the Vcontrol that show that the radio is talking to the ESC as shown in the video by Kyle Dahl et al.
Eddi E. aus G.
1 June 2026 14:4001.06.2026 14:40
Hi,
do you have the Scorpion ESC App installed, on your VBar Control (Classic, I presume?).
Please help with the serial no..
The heli setup wizard on Classic is help to self-help. Back then, it gave basic instructions on how to start setting up an ESC with it's own procedures, stick-beep, so it basically only shows an (also old) QR code pointing to further information. Haven't revisited that for a while, though.
—Eddi
Born to fly ...
forced to work.