← Henseleit

Issue with full size VBar + external sensor translated

OEM models › Henseleit · Started by belgo on 14 March 2025 13:5214.03.2025 13:52
belgo 14 March 2025 13:5214.03.2025 13:52
Hi there,

I am having the following issue:

- I am referring to an older Vstabi with external sensor, version 5.3. I have been using this combo in my first Henseleit TDR for a long time.

- everything has been working flawlessly untill today when I was trying to install banks (I was only using Bank 1 before)

- despite the fact that all the bars in the Vstabi controlpanel as well as in the transmitter display follow the stick movements accordingly, none of the servo's move at all ..... Not even in programme mode.

- at connecting flight battery, the Kontronik motor sends out the beeps indicating the nr of cells; however after initialisation the swash does not go up and down as should be.

What did I do wrong?

Your help would be mostly appreciated

Regards



2 mal bearbeitet. Zuletzt am 14.03.2025 14:06 von belgo.
Eddi E. aus G. 14 March 2025 14:1214.03.2025 14:12
Hi,

just a guess: could be you copied a setup from a yet unused bank (not set up) to your bank 1, and now all are virgin (again)?

I'd just start over, do a new setup (e.g. in bank 1) then copy bank 1 to the other banks (not the other way around), then you can start making adjustments to the other banks.

Kind regards

Eddi

Born to fly ...
forced to work.
belgo 14 March 2025 15:0014.03.2025 15:00
Thanks Eddy for the swift reply,

Could be the case that I copied a blank bank; I do remember I saw a red colour when I was copying.

Just had another look and indeed a couple tabs were not filled in (for instance collective direction, trim )


I' ll give that a try

Regards



2 mal bearbeitet. Zuletzt am 14.03.2025 15:14 von belgo.
belgo 15 March 2025 10:2815.03.2025 10:28
Hi Eddy,

Many, many thanks for the tip!

I simply filled in the "empty taps" and all servo's are working again.


Have a nice WE!

Regards

Ivan
Eddi E. aus G. 17 March 2025 08:5717.03.2025 08:57
:-) :-)

Most of the time, it's just simple :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless