← Henseleit

Henseleit TDR II with Neo and RX satellite replacement from Jeti translated

OEM models › Henseleit · Started by MacMan on 16 September 2026 16:5916.09.2026 16:59
MacMan 16 September 2026 16:5916.09.2026 16:59
Hello everyone,

I would like to use my TDR II with Speedhaube and Neo, which is currently operated with Jeti satellite.
I want to connect it to my Control Touch. Should I connect the RX satellite to the existing Neo? I would actually prefer this option because of the antenna placement, or would it be better to use a Neo with integrated VLink?
machine-translated from German · Show original
RV 16 September 2026 17:2716.09.2026 17:27
I would upgrade the NEO (if it's a 2nd Gen. NEO) to internal satellite or get an EVO.

External satellite receivers always have a disadvantage compared to internal ones in terms of interface and power supply.
The NEO's control system is also outdated; an EVO would be significantly better.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
MacMan 16 September 2026 18:5316.09.2026 18:53
Thanks Rainer for your quick reply. It's a first-generation Neo, which, according to the serial number, can't be retrofitted with the antennas. It worked perfectly with the Jeti, though. If I install an EVO, I'll have the antenna problem again.
But I am happy to accept advice, especially since I really don't want any reception problems with this model.
machine-translated from German · Show original
RV 16 September 2026 22:0316.09.2026 22:03
Okay – I wasn't aware that routing the antenna would be so problematic here. Do you have a picture of how the stabilizer bar is installed?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Fingolf 17 September 2026 07:2517.09.2026 07:25
Hi, Jan had planned it so that it would work with just the stabilizer.
I flew that one too.

From my point of view, an Evo would be recommended.

Stephan
machine-translated from German · Show original
MacMan 17 September 2026 11:5717.09.2026 11:57
Please
machine-translated from German · Show original
Eddi E. aus G. 17 September 2026 14:3217.09.2026 14:32
Hi,

I think one could also consider the EVO + remote antenna here, however it is currently not in stock and may take 2-3 weeks.

It has normal-length antennas (about 15.5 cm of free antenna cable to the tip), and the connecting cable (about 11.5 cm) could also be extended.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MacMan 17 September 2026 14:4217.09.2026 14:42
Hi Eddi,

That's what I suspected, but then I'm basically back to using the Neo with the RX Sat. Or does the Evo offer significantly better reception compared to the Neo?



Edited once. Last edited on 17.09.2026 at 14:43 by MacMan.
machine-translated from German · Show original
Eddi E. aus G. 17 September 2026 14:5317.09.2026 14:53
Hi,

Well, the EVO+Remote antenna already makes four active antennas in the model.

Then, although the protocol and performance values are the same, the newer receivers are generally more robust at the limits, but I lack too much in-depth knowledge :-) to explain that in more detail.

And the power supply of the built-in receiver is in turn more robust than if a receiver is plugged into the same multi-pin connector as the servos, where back EMFs and voltage drops are more prevalent (which can be smoothed out with capacitors, of course).

The remote antenna handles this better than the original RX satellites.

Plus, plus, plus, newer sensors, faster processor, V8 control loop, 10 years younger, etc. etc. ...

But in principle, it should also work with the NEO and the satellite receiver – I think :-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MacMan 17 September 2026 15:4717.09.2026 15:47
Thank you so much for your help.

In the long run, I'll go for the EVO; it already won me over in the Logo 700.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless