← XL Power Support

Controllers do not initialize translated

OEM models › XL Power Support · Started by Monzta78 on 16 May 2026 09:2016.05.2026 09:20
Monzta78 16 May 2026 09:2016.05.2026 09:20
Hello,
As user Ralwe already mentioned in the VTX thread, my ESCs also fail to initialize after uploading the new Stratos preset. Both motors beep and don't start. Only when I set a normal protocol for the ESC output does the main rotor ESC initialize. It's similar with the tail motor; only when I switch to DShot does the tail motor ESC initialize and the motor stop beeping. The preset Stratos 200 settings don't work for me. What's going on?

Regards, André
machine-translated from German · Show original
HeliALEX 16 May 2026 10:2216.05.2026 10:22
Good morning André,

Is this a completely new stabilizer “out of the box”?

If so, please go to the macro cells menu, scroll all the way down and press "reset".

Please let me know briefly if it's OK, thank you.
machine-translated from German · Show original
Monzta78 16 May 2026 10:4116.05.2026 10:41
Hi Alex,
Yes, it's a completely new stabilizer. However, I had previously loaded the setup from the Logo 200 onto it. Resetting the macro cells unfortunately didn't help. The problem persists.
machine-translated from German · Show original
Monzta78 16 May 2026 11:1416.05.2026 11:14
Okay, it was probably the user's fault. You should also install the latest update on the Evo. :-)

This can be closed.

Sorry.

LG
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless