jgmeiner
18 May 2026 17:3418.05.2026 17:34
Hi everyone, I've now completed 7 flights with my Stratos, and on 2 of them, the mAh consumption reading after the initial announcement was completely wrong (-12000 mAh consumption with a 650mAh LiPo... image2, image3). On the last flight, the home screen remained black (image0, image1) after I had opened the Hobbywing telemetry via the icon, but the battery level was displayed and announced correctly. I've attached two screenshots of each...
Of course, I updated everything yesterday. The vstabi log is unremarkable... I also flew the battery down for about 3.5 minutes. You can see in image3 that telemetry was received. So I'm guessing it's a bug in the mAh display, but you probably know better.
My setup:
VBC Evo+ Serial 11007286
Vbar Evo Pro 8.2 Serial 0027008950
Regards,
Johannes
Edited 2 time(s). Last edit at 05/18/2026 05:36PM by jgmeiner.
Hi Leute, ich habe jetzt 7 Fluege mit meinem Stratos absolviert, und bei 2 davon war der mAh-Verbrauch nach der ersten Ansage komplett daneben (-12000 mah Verbrauch beim 650er Lipo... image2, image3). Beim letzten Flug blieb dann der home-screen schwarz (image0, image1), nach dem ich zuvor die Hobbywing-Telemetrie via icon geoeffnet habe, es wurde aber der Akkustand korrekt angezeigt und angesagt. Ich hab mal je 2 Screenshots angehaengt...
Selbstverstaendlich hab ich gestern alles aktualisiert. Das vstabi-log ist unauffaellig... Ich bin dann auch noch den Akku so 3.5 Minuten leer geflogen. Man sieht auch in image3, dass Telemetrie ankam. Also ich tippe eher auf einen Bug in der mah-Anzeige, aber ihr wisst das sicher besser.
Mein Setup:
VBC Evo+ Serial 11007286
Vbar Evo Pro 8.2 Serial 0027008950
Mfg,
Johannes
Edited 2 time(s). Last edit at 05/18/2026 05:36PM by jgmeiner.
RV
18 May 2026 20:3418.05.2026 20:34
Nope - our display and data processing of capacity is as follows:
=> Show what is received in the corresponding byte on the telemetry
And that applies to all controllers. If something were wrong there...
Therefore - a problem for XL or Hobbywing.
But - since Carl is the XL/HW representative here - he can certainly address this for further processing or pick it up here.
Nevertheless - which flights were those? - Then I'll take a look at the cloud.
@Carl: The controller info menu shows a question mark as the controller type – is that normal? If so, HW should tell me the type and the corresponding code...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 3 time(s). Last edit at 05/18/2026 08:40PM by RV.
Nope - die Anzeige und Datenaufbereitung der Kapazität unsererseits ist so:
=> Zeige an was im entsprechenden Byte auf der Telemetrie reinkommt
und das bei allen Reglern. Wenn da was falsch wäre ...
Insofern - Ein Problem von XL bzw. Hobbywing.
Aber - da Carl hier ja XL/HW Repräsentant ist - kan er das an der Stelle sicher zur weiteren Bearbeitung Adressieren bzw. hier aufgreifen.
nichtsdestotrotz - welche Flüge waren das denn? - Dann sehe ich mir die Cloud mal an.
@Carl: im Regler Info Menü steht ein ? als Reglertyp - ist das normal? - Wenn ja - HW soll mir den Typ und übermittelten Code dazu mal benennen ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 3 time(s). Last edit at 05/18/2026 08:40PM by RV.
Zalo
18 May 2026 23:4618.05.2026 23:46
What BEC voltage is recommended for the Stratos 200? I've heard it apparently matters; is there any information on this?
welche BEC Spannung ist denn empfehlenswert bei dem Stratos 200? habe gehört das spielt anscheinend eine Rolle, gibts hierzu infos?
HeliALEX
19 May 2026 08:3019.05.2026 08:30
Zalo Wrote:
-------------------------------------------------------
Which BEC voltage is recommended?
> the Stratos 200? I heard that plays
> Apparently plays a role, is there any information about this?
8 volts, the servos are HV-capable
Zalo Wrote:
-------------------------------------------------------
> welche BEC Spannung ist denn empfehlenswert bei
> dem Stratos 200? habe gehört das spielt
> anscheinend eine Rolle, gibts hierzu infos?
8 Volt, die Servos sind HV-fähig
jgmeiner
19 May 2026 12:1719.05.2026 12:17
I should add that I'm using the Stratos-200 preset and have tweaked it slightly. I haven't touched the model settings yet (except for min/max pitch).
@Rainer, for example, this one:
https://www.vstabi.info/en/cloud?action=edit_flight&start=0&ftime=alle%20Logs&Aid=DMW6C3NMSB&Sid=DMW6C3NMSB&sort=Neue%20Zuerst&model=alle%20Modelle&vbar=Alle%20VBar&flightno=1779122449&list=flightlist The attached image clearly shows that there's a sudden jump. And then another one...
Could this be due to a loose connection in the telemetry line? I'm using the included adapter, which seems a bit flimsy to me...
Edited 1 time(s). Last edit at 05/19/2026 12:20PM by jgmeiner.
Ich muss noch ergänzen, dass ich das Stratos-200 preset verwende, und etwas auf mich angepasst habe. Die Modelleinstellungen (bis auf min/max Pitch) hab ich noch nicht angefasst.
@Rainer der hier z.b.
https://www.vstabi.info/en/cloud?action=edit_flight&start=0&ftime=alle%20Logs&Aid=DMW6C3NMSB&Sid=DMW6C3NMSB&sort=Neue%20Zuerst&model=alle%20Modelle&vbar=Alle%20VStabi&flightno=1779122449&list=flightlist
Im Anhang sieht man schön, dass hier plötzlich ein Sprung ist. Und dann nochmal...
Koennte das an einem Wackler in der Telemetrieleitung liegen? Ich hab ja hier den mitgelieferten Adapter verwendet, das scheint mir etwas wackelig...
Edited 1 time(s). Last edit at 05/19/2026 12:20PM by jgmeiner.
Eddi E. aus G.
19 May 2026 13:1919.05.2026 13:19
Good morning,
I don't think it has anything to do with the connection. Data, bytes, are being transmitted in our direction, and if one byte arrived fragmented, in my opinion the next one wouldn't be worth about 12,000 bytes more.
Interesting, then it counts about 100 mAh again, then jumps back up to 12,000.
More precisely, first 112 (divisible by 16) then 64 (divisible by 16) suggests some kind of shift that shouldn't be there.
It looks more like the counter in the controller is jumping around, a comma or a bit or a few are shifting, I don't know.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
ich denke nicht, dass das mit der Leitung zu tun hat. Da werden ja in unsere Richtung Daten, Bytes, übermittelt, und wenn eins zerstückelt ankäme, wäre mMn nicht das nächste etwa +12.000 mehr wert.
Spannend, dann werden wieder etwa 100 mAh gezählt, dann springt es wieder um 12.000.
Genauer, zuerst 112 (durch 16 teilbar) dann 64 (durch 16 teilbar), spricht für irgendeinen Shift der da nicht sein sollte.
Sieht eher aus, als ob im Regler der Zähler springt, ein Komma bzw. ein Bit oder ein paar verrutschen, keine Ahnung.
Grüßle
Eddi
Born to fly ...
forced to work.
jgmeiner
19 May 2026 13:5019.05.2026 13:50
Okay, thanks for the analysis!
It's not like it's a showstopper. But it would be interesting to know if this is an isolated incident, or if other Stratos pilots are experiencing the same problem.
Edited 1 time(s). Last edit at 05/19/2026 01:53PM by jgmeiner.
Ok, thx erstmal fuer die Analyse!
Ist ja nicht so, dass das ein Showstopper wäre. Aber wäre spannend, ob das ein Einzelschicksal ist, oder ob noch weitere Stratos-Piloten das Problem haben.
Edited 1 time(s). Last edit at 05/19/2026 01:53PM by jgmeiner.
PeteStewardson
19 May 2026 14:1019.05.2026 14:10
I was seeing this also, however I changed the BEC to 8v and LVC to under 3v and it han't happened since. However I know others have also seen this with the 8v BEC setting.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Eddi E. aus G.
19 May 2026 14:1919.05.2026 14:19
Yeah, I have no idea, I could be wrong.
But it's interesting, there are flights where it seems to count normally, and then there are some with jumps of 12,000.
There might also be an electrical fault involved, which could be causing the controller software to hiccup... at least it doesn't seem to be anything that the stabilizer is noticing (the normal log and the radio signal are clean).
Having a speed controller integrated into the motor is practically a novelty; I have no idea what all could be possible with that :-)
Grüßle
Eddi
Born to fly ...
forced to work.
Ja, keine Ahnung, könnte auch sein dass ich daneben liege.
Aber interessant, da sind Flüge, wo es normal zu zählen scheint, und dann sind da welche mit der 12.000-er Sprüngen.
Womöglich ist da auch eine elektrische Störung im Spiel, die ggfs. der Regler-Software einen Schluckauf verpasst ... es scheint zumindest nix zu sein, was bei der Stabi bemerkenswert ankommt (das normale Log und auch der Funk sind sauber).
Regler im Motor verbaut ist ja praktisch auch ein Novum, keine Ahnung, was da nicht alles sein kann :-)
Grüßle
Eddi
Born to fly ...
forced to work.
ulrich
19 May 2026 15:3719.05.2026 15:37
The capacity is transmitted as an absolute value from the controller to the stabilizer in each packet. In addition, there is a CRC and a key, both of which must match. Transmission errors can be ruled out; otherwise, there would only be one packet, and the capacity would revert to the previous value.
Unfortunately, I cannot investigate it at the moment because I don't have a test helicopter yet.
So long... Uli
http://www.vstabi.de
Die Kapa wird in jedem Paket als absoluter Wert vom Regler zum Stabi übertragen. Dazu gibt es noch eine CRC und ein Key, die beide stimmen müssen. Übertragungsfehler kann man ausschliessen, dann wäre es nur ein Paket, und die Kapa würde zurückspringen.
Ich kann es derzeit leider nicht untersuchen, weil ich bis jetzt noch keinen Testheli habe.
so long ... Uli
http://www.vstabi.de
Carl-Henning Siebert
20 May 2026 05:4920.05.2026 05:49
Good day,
The BEC voltage can be set to 8.3V.
The problem with HW telemetry is known. HW is working on fixing it.
As soon as I have information, I will post it here.
Kind regards
Carl
Guten Tag,
Die BEC Spannung kann auf 8,3V eingestellt werden.
Das Problem mit der HW Telemetrie ist bekannt. HW ist dabei das Problem zu beheben.
Sobald ich Infos habe werde ich es hier posten.
Freundliche Grüße
Carl
Eddi E. aus G.
20 May 2026 11:1520.05.2026 11:15
Good morning,
A quick question for the hopefully rapidly growing collective intelligence: this appears to be a 4s setup?
I just got another customer who has the same effects (+ worse ...), also 4s.
Can anything be deduced from this, or connections made? Carl, do you have any experience with this?
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
kurze Frage an die hoffentlich schnell wachsende Schwarm-Intellenz: das hier scheint ein 4s-Setup?
Hab grad einen anderen Kunden, wo es die selben Effekte (+ schlimmere ...) gibt, auch 4s.
Kann man da was ableiten oder Zusammenhänge herstellen, Carl, hast Du, habt Ihr da Erfahrung?
Grüßle
Eddi
Born to fly ...
forced to work.
Carl-Henning Siebert
20 May 2026 12:5420.05.2026 12:54
Good morning,
I'll call HW tomorrow.
I have already forwarded the problem to HW.
I'll get back to you when I have new information.
greeting
Carl
Moin,
Ich rufe mal bei HW morgen an.
Das Problem habe ich bereits weitergeleitet and HW.
Bei neuen infos melde ich mich.
Gruß
Carl
Eddi E. aus G.
20 May 2026 13:4720.05.2026 13:47
Good morning,
I just had a 4s customer on the phone... nobody flies this thing with 3s?! :-)
—Eddi
Born to fly ...
forced to work.
Moin,
hab grad noch einen 4s-Kunden am Telefon gehabt ... fliegt keiner das Ding mit 3s?! :-)
—Eddi
Born to fly ...
forced to work.
xhavier
20 May 2026 17:5920.05.2026 17:59
Hi it happens on my s200 / evo too. 4s
Edited 1 time(s). Last edit at 05/20/2026 06:27PM by xhavier.
Hi it happens on my s200 / evo too. 4s
Edited 1 time(s). Last edit at 05/20/2026 06:27PM by xhavier.
RV
20 May 2026 18:0420.05.2026 18:04
I have also sent an email to my contact at HW for this AND for the lack of information about a new ESC type for the info panel to show (currently "?" shown). But - don't mess it up, these are 2 different stories but regarding to the same manufacturers.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
I have also sent a email to my contact at HW for this AND for the lack of information about a new ESC type for the info panel to show (currently "?" shown). But - don't mess it up, this are 2 different stories but regarding to the same manufacturers.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Herr Rossi
22 May 2026 21:4022.05.2026 21:40
Hello everyone,
I made 5 flights today with a 3S setup.
So far everything looks normal.
According to my Junsi 4010, it recharged 502 mAh once and 505 mAh a second time. Everything seems fine to me.
The flights were very relaxed, though. Just messing around in the garden with benches 1 and 2. A flip here, a few slow tic-tocs there, etc.
Everything is still using the original preset.
greeting
Rüdiger
Hallo Zusammen,
ich habe heute 5 Flüge mit einem 3S-Setup gemacht.
Bisher sieht alles normal aus.
Es wurden laut meinem Junsi 4010 einmal 502 mAh und das zweite mal 505 mAh nachgeladen. Ist für mich alles im grünen Bereich.
Die Flüge waren aber sehr gechillt. Bisschen im Garten mit Bank 1 und 2 durch die Gegend geeiert. Mal ein Flip hier ein paar langsame Tic-Tocs da, usw.
Alles noch mit dem originalen Preset.
Gruß
Rüdiger
jgmeiner
23 May 2026 15:1023.05.2026 15:10
It usually happens every 3-4 flights for me. However, since I set the cutoff to 3V, it's been quiet. I'll keep monitoring it...
Bei mir kommt es normal alle 3-4 Fluege. Seit ich auf 3V cutoff eingestellt habe, ist allerdings Ruhe. Ich beobachte es weiter...
MarcoWeh
31 May 2026 14:0831.05.2026 14:08
Is there any news regarding a suitable hardware update?
I also get this message every 3-4 flights. I have the timer running as a backup, but I'd prefer to turn it off.
Edited 1 time(s). Last edit at 05/31/2026 02:08PM by MarcoWeh.
Gibt es hier schon Neuigkeiten bzgl. eines passenden HW Updates ?
Bei mir kommt die Meldung auch jeden 3-4 Flug. Ich habe den Timer als Backup mit laufen, würde ihn aber lieber ausschalten.
Edited 1 time(s). Last edit at 05/31/2026 02:08PM by MarcoWeh.
Eddi E. aus G.
1 June 2026 09:0701.06.2026 09:07
Good morning,
I've only heard secondhand that HW is working on it and/or has already fixed it, but presumably it hasn't been released yet?
—Eddi
Born to fly ...
forced to work.
Moin,
ich hab nur aus 3. Hand gehört, dass HW da dran ist und/oder das schon gefixt hätte, aber vermutlich ist das noch nicht released?
—Eddi
Born to fly ...
forced to work.
thomas1130
2 June 2026 14:1402.06.2026 14:14
Hi everyone,
I now also have a Stratos 200 with EVO (Gen2) - first flight today - and immediately had the -2000% battery after about 40 seconds of flight time.
I also fly with 4s - everything is up to date with the latest software.
LG
Thomas
Hi allerseits,
hab jetzt auch einen Stratos 200 mit EVO (Gen2) - heute Erstflug - und auch gleich mal die -2000% Akku gehabt nach ca 40sec Flugzeit.
Fliege auch 4s - alles am aktuellen SW Stand.
LG
Thomas
Herr Rossi
2 June 2026 17:0002.06.2026 17:00
Hello,
It happened to me last week too. Mid-flight, the battery consumption indicator jumped up by 11931 mAh. It always shows 11931 mAh.
I've made about 15 flights now and the error has occurred twice. So for me, it's not too bad.
With a friend of mine, it's exactly the opposite. Out of 15 flights, the fuel consumption display is only correct maybe once. :-(
It's a bug in the hardware controller, and a bug fix beta firmware is already available.
When HW will officially release a firmware update is anyone's guess. :-/
Best regards
Rüdiger
Hallo,
mich hat es dann auch letzte Woche erwischt. Mitten im Flug springt die Verbrauchsanzeige um 11931 mAh nach oben. Es sind immer 11931 mAh.
Habe jetzt ca. 15 Flüge gemacht und der Fehler ist zweimal aufgetreten. Es hält sich bei mir also in Grenzen.
Bei einem Kumpel ist es genau anders herum. Von 15 Flügen, geht vielleicht einmal die Verbrauchsanzeige richtig. :-(
Es ist ein Bug vom HW-Regler und es gibt bereits eine Bug Fix Beta Firmware.
Wann HW offiziell ein Firmware-Update heraus bringt, steht in den Sternen. :-/
Liebe Grüße
Rüdiger
thomas1130
2 June 2026 18:1602.06.2026 18:16
Mr. Rossi wrote:
-------------------------------------------------------
It's a bug in the hardware controller and there are already...
> a bug fix beta firmware.
> When HW officially releases a firmware update
Whether it will bring is written in the stars. :-/
And how I'm going to get that working on my hardware controllers is completely up in the air :-/
Herr Rossi Wrote:
-------------------------------------------------------
> Es ist ein Bug vom HW-Regler und es gibt bereits
> eine Bug Fix Beta Firmware.
> Wann HW offiziell ein Firmware-Update heraus
> bringt, steht in den Sternen. :-/
Und wie ich das auf meine HW Regler bringe steht überhaupt in den Sternen :-/
Herr Rossi
2 June 2026 19:3402.06.2026 19:34
In principle, the controller can be programmed and/or flashed using a hardware programming box.
You just need to know which one! :-)
So, the "Multifunction LCD ProgramBox" with the white lettering doesn't work. The one with the blue lettering does. You can set parameters and flash firmware with it. You can't set parameters with the "OTA Programmer," but flashing might work if there's a firmware update in the hardware database. So far, nothing's working for me. (I bought this Bluetooth module because I thought it would solve my future needs and allow me to configure and flash all my hardware controllers via Bluetooth with my phone. The module only handles the communication with the controller; the software does the rest. I guess I was wrong! :-)
Yes, and then there's the "Multifunction LCD ProgramBox Pro". With that, I can adjust the parameters and also flash firmware. The Stratos controller is recognized as "Platinum V5", by the way.
So, with the right ProgramBox and firmware, it should work. :-)
Edited 1 time(s). Last edit at 06/02/2026 08:05PM by Mr. Rossi.
Also prinzipiell lässt sich der Regler mit einer HW-Programmierbox programmieren und/oder flashen.
Man muss nur wissen mit welcher! :-)
Also die "Multifunction LCD ProgramBox" mit der weißen Beschriftung funktioniert nicht. Die mit der blauen Aufschrift funktioniert. Da lassen sich Parameter einstellen und Firmware flashen. Mit dem "OTA-Programmer" kann man keine Parameter einstellen, aber das Flashen soll wohl evtl. vielleicht funktionieren, wenn es ein Firmware-Update in der HW Database gibt. Also bei mir funktioniert da momentan noch nichts. (Ich hatte mir dieses BT-Modul zugelegt, weil ich dachte dann habe ich für die Zukunft ausgesorgt und kann alle HW-Regler über Bluetooth mit dem Handy einstellen und flashen. Das Modul übernimmt nur die Kommunikation zum Regler, den Rest macht die Software. War wohl falsch gedacht! :-)
Ja und dann gibt es noch die "Multifunction LCD ProgramBox Pro". Mit der kann ich die Parameter einstellen und auch Firmware flashen. Der Stratos-Regler wird übrigens als "Platinum V5" erkannt.
Also mit der richtigen ProgramBox und der Firmware sollte es funktionieren. :-)
Edited 1 time(s). Last edit at 06/02/2026 08:05PM by Herr Rossi.
svenb
2 June 2026 21:0602.06.2026 21:06
Hier ein Auszug aus der Stratos 200 Gruppe!
Especially for vbar users - telemetry doesnt work correctly after you use hold . There is required update of your esc in the model via programming card by newest version of hobbywing app :
https://www.dropbox.com/.../USB-Link-XL200-20260527.rar...
How to connect :
https://www.facebook.com/reel/2418086551951308/?fs=e&s=TIeQ9V&fs=e&fs=e
I tested that on my model and its works , no longer bug with telemetry.