← VBar NEO for external transmitters

Buddying with Futaba 14sg vbar neo translated

VBar › VBar NEO for external transmitters · Started by lucasuk86 on 28 June 2023 21:1828.06.2023 21:18
lucasuk86 28 June 2023 21:1828.06.2023 21:18
I can fly my helis fine with my transmitter (futaba 14sg). Works amazing.

However I want do do some training with someone using a buddy link wire between the 2 transmitters.

Both transmitters are the same.
I copy my profile over to the other.
My transmitter is Mode 2
The other is set to mode 1.

For the life of us we cannot not get it to work correctly. I have no pitch control when I'm in control. We can not figure it out.

Is this possible at all? Can anyone give any advice?

regards

Luke
RV 29 June 2023 06:4229.06.2023 06:42
I think this is a question for a Futaba Support - we can only work with the signals given to the RX into NEO.

Do they have a idea?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
lucasuk86 6 July 2023 23:1206.07.2023 23:12
Turns out that the two transmitters are using different firmware. So I have updated the firmware and waiting to test.

Thanks for your help
VStabi VStabi Pioneer of Flybarless