← VBar NEO for external transmitters

Vibration errors in log but nothing in spectrum analyzer translated

VBar › VBar NEO for external transmitters · Started by johnpssa on 16 July 2024 14:4516.07.2024 14:45
johnpssa 16 July 2024 14:4516.07.2024 14:45
Hello,
Vbar Neo v6 in an SAB Piuma running 6s at 1500RPM flying sports aerobatic.
Vbar Log file is full of raised, high and some extreme vibration warnings.

I ran the spektrum analyser with main blades removed but tail blades still fitted.
The maximum number in the “Live Display” Vib Act was 48
The analyser graph showed so little activity I did wonder if it was actually working.

Is it possible to get so many vibration warnings with nothing showing in the analyser.

Regards
John Plumbley
johnpssa 16 July 2024 17:3816.07.2024 17:38
Hello,
Should also add that the log file from the, no main blade, test run did not show any errors.
RV 16 July 2024 17:5616.07.2024 17:56
Yes it is. Cosider the heli is moving, the blades are moving too when you move the sticks.

Especially on helis with hard dampening in the main head - the blade move will produce lots of those entries. We are just showing up what isn't good for the FBL here.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
johnpssa 17 July 2024 00:3317.07.2024 00:33
Hello,
Rainer, thanks for your response.
Given that a flight with my Logo 550 usually shows no vibration warnings I am concerned about seeing so many.

Do the lower RPM values make this worse are there any actions I can take to improve the situation.

I attach a jpeg of the latest log file.

Regards
John Plumbley

RV 17 July 2024 17:4617.07.2024 17:46
Hello John,

the only thing which may improve it here - is a less stiffer connection between blades and main shaft (softer damoening) and a frame which absorbs also some vibrations (no carbon ...)

At the end - if you can't notice anything like tracking, bend shafts etc. - and the heli flies well - there is no need to do something in general.

One thing - having a VBC it would be the next step to run it in a hover and watch the analyzer as well as the rescue status panel. If there is nothing special to see - it comes from flight operations ;-) - If we would see something there - we would be able to track down more.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless