← VBar NEO for external transmitters

Smoked my NEO translated

VBar › VBar NEO for external transmitters · Started by Ajbart76 on 19 March 2025 21:1919.03.2025 21:19
Ajbart76 19 March 2025 21:1919.03.2025 21:19
Plugged power into the sensor port during a brain fart.

Is there any cost effective way to get this fixed or do I have the makings of a new Christmas tree ornament??

Thanks
RV 19 March 2025 22:3219.03.2025 22:32
Hello,

please open a service case for the VBar.

Therefore log into vstabi.info, then go to your items (left bottom), click on the servie icon of this device in your list.

If the device is not registered - register previuosly or type in the serial number manually.

A form comes up - please add your contact data and in the second form a error description. You can also add a image or logfile. In case of a warranty request we need the purchase invoice here too.

You will get a confirmation mail after all stored in our system.

The service will then work on your case as soon as possible and contact you by email.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Ajbart76 20 March 2025 02:2920.03.2025 02:29
Thanks for the reply.

Would it be possible to upgrade the unit to Vlink during the repair process?

I bought this used thinking it was a Vlink, and doesn’t do me much good unless it can be changed over.

I damaged the unit just prior to registering.

Thanks again
Eddi E. aus G. 20 March 2025 08:5520.03.2025 08:55
Hi again,

depending on what's damaged, if it's repairable or not, we can either upgrade, or replace with a VLink.

If this unit was already bound to a VBar Control before registering, before electrocution, you might be able to read the serial no. from the logs (or, Touch/EVO/+, from the cloud).

Otherwise, if it was bought used, maybe the previous owner can help out?

If no serial no., you can also use vstabi.info/rma, select Other Items (no serial no. required there), and fill that form.

Best,

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless