← VBar NEO for external transmitters

Neo with DSMX satellite translated

VBar › VBar NEO for external transmitters · Started by Mani93 on 13 February 2025 15:0213.02.2025 15:02
Mani93 13 February 2025 15:0213.02.2025 15:02
hey,

Can I bind a NEO (non-VLink) with DSMX satellites and Spektrum without an additional Spektrum receiver?
Programming via PC/VBCT Evo?

Regards
machine-translated from German · Show original
RV 13 February 2025 21:0913.02.2025 21:09
Yes - that's possible with the PC software.

VBC always takes precedence as long as it is bound (programming, LS, etc.).

BUT:

You will then lose the Mikado telemetry.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Mani93 13 April 2025 08:0713.04.2025 08:07
OK,
I've now programmed everything including bank switching, engine on/off, and rescue functions.

Now, one more question: does the beginner hover mode still work?

Regards
machine-translated from German · Show original
RV 13 April 2025 10:2113.04.2025 10:21
For programming:
Define a 3-position switch (channel for external transmitter) for rescue. If it's set correctly (center 0 - then ±100), it can be switched on. But... please don't use it like this yet, because:

To adjust the hover position during a hover flight:
Only possible with VBar Control.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless