← VBar NEO for external transmitters

Setting up Expo in NEO in conjunction with Jeti translated

VBar › VBar NEO for external transmitters · Started by cc1975 on 22 April 2025 19:2222.04.2025 19:22
cc1975 22 April 2025 19:2222.04.2025 19:22
Hello, my friend is building a helicopter and is using the NEO in conjunction with a Jeti receiver/transmitter.
Question: Where is the swashplate expo set here? Is it in the NEO settings or on the Jeti transmitter? Which expo setting then applies? Or do they overlap (i.e., 20% expo in the NEO plus 20% expo in the Jeti transmitter = 40%)?
Thanks, best regards, Christian
machine-translated from German · Show original
RV 22 April 2025 19:2722.04.2025 19:27
This overlaps - and since not all Expo is the same (there are different calculation methods), please only use ONE.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless