← VBar NEO for external transmitters

Mac software cannot be installed translated

VBar › VBar NEO for external transmitters · Started by Matze2510 on 24 November 2025 00:2224.11.2025 00:22
Matze2510 24 November 2025 00:2224.11.2025 00:22
Hello,

Since I am a Mac owner with a Tahoe 26.1 operating system, I have to note that the software cannot be installed.

Therefore, I cannot register my two old Neos.

Why can't the Neos be registered via the VBar Control transmitter?

What other registration options are there?

Do I need to inform support?

I would be grateful if someone could clarify this for me.
machine-translated from German · Show original
RV 24 November 2025 08:0624.11.2025 08:06
Macs probably no longer work with current operating systems.
VBC Classic does not have WiFi.

Use a Windows PC, possibly in a VM or a VBC touch/EVO.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 24 November 2025 09:5124.11.2025 09:51
Good morning,

Older NEOs, if they haven't been updated since before 2018 when the VBar Control Touch was released, are completely unaware of their good fortune in receiving an over-the-air update.

Then you would actually have to go back to a Windows PC.

Otherwise, it would work with your VBar Control EVO, just like with the VBar EVO: transmitter settings, NEO/EVO updater, check, QR code, ...

With Macs, we've been slowly but surely sidelined by Apple since Big Sur (2020). VBar Control Manager might still have worked, but since Monterey and M-processors, we're unfortunately out.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
RV 24 November 2025 15:2624.11.2025 15:26
Does it now have VBC Touch, VBar Control EVO, VBar Control Basic or VBar Control (Classic)?

Above he only writes VBar Control => For me, that's the "Classic" because it was sold without any additional information back then.

OTA registration/update works with VBC EVO and Touch - and as Eddi already mentioned - if it's a VBar NEO with very old data, it has to be connected to USB once anyway.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 24.11.2025 15:33 von RV.
machine-translated from German · Show original
Eddi E. aus G. 24 November 2025 15:3624.11.2025 15:36
Good morning,

Well, I looked up the email address here in the forum, and the corresponding MikadoID (it exists), and an EVO is registered there :-)

—Sherlock E. from P.

Born to fly ...
forced to work.
machine-translated from German · Show original
RV 24 November 2025 16:2224.11.2025 16:22
@Matze:

Please watch the videos about VBC Touch here, it's explained there....

https://www.vstabi.info/de/node/2279

Video 02 would then be for the future!

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 24.11.2025 16:22 von RV.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless