← VBar NEO for external transmitters

Re: Rescue function horizon calibration translated

VBar › VBar NEO for external transmitters · Started by grottenflieger on 31 December 2025 16:2131.12.2025 16:21
grottenflieger 31 December 2025 16:2131.12.2025 16:21
Hi VBar users,

After acquiring a very well-tuned L600SX, I retrofitted the missing rescue system and then restored the previous setup. Unfortunately, the Logo also veers noticeably sideways during climbs.

How can I perform a horizon calibration of the rescue function?

GEMINI explained very well how it could work – however, I can't find any calibration option in the SENSOR/INSTALLATION POSITION settings! Even worse, if I deploy the rescue system several times in a row, the tilt angle gets progressively worse.

Greetings from 2025
The Ulcer



Edited twice. Last edited on 31.12.2025 at 16:40 by grottenflieger.
machine-translated from German · Show original
RV 31 December 2025 20:0531.12.2025 20:05
Please NO thread hijacking - I've split it up. One pilot, one model, one thread - for clarity.

What would be interesting first is a screenshot of the vibration display in the VBC while hovering. Then, after hovering for a while, a screenshot of the rescue app showing the visualization would also be helpful.

It would also be good to know if the rescue function is triggered immediately after switching on the device while stationary (without moving the model) - the TS also behaves "crookedly".

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 5 January 2026 11:1005.01.2026 11:10
Hi and Happy New Year!

I'm glad that human-made support still beats AI :-)

The horizon calibration can be found in Setup/Swashplate/Expert (Appendix).

But first, Rainer's post, and preferably from bottom to top, starting with the rescue function on the ground right after switching it on: is the TS currently running upwards?
Then a test run on the ground with vibration analysis, what do you see?
After a longer test run on the ground (or landing the test hoverling again), let it coast to a stop, rescue, where to?

With VBar Control you could see even more, such as rescue status and raw sensor values.

Greetings

Eddie

Born to fly ...
forced to work.

machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless