Christoph Fuchslueger
11 February 2026 22:0411.02.2026 22:04
Hello!
I have an old Graupner Uni Star 60 helicopter. It still has analog servos installed. Can I connect them to the Neo as normal, or is it possible to adjust the control frequency on the Neo? The tail servo frequency can be adjusted, but I haven't found anything for the swashplate servo.
Thanks for the help!
Best regards, Christoph
Hallo!
Ich habe einen Heli Oldi - Graupner Uni Star 60. Bei dem Heli sind noch Analog Servos eingebaut. Kann ich die am Neo normal anschließen oder kann man die Ansteuerfrequenz beim Neo einstellen? Beim Heck kann man die Frequenz einstellen nur hab ich für die TS nichts gefunden.
Danke für die Hilfe!
LG Christoph
RV
11 February 2026 22:1511.02.2026 22:15
Directly with the NEO - no, 144Hz is the default setting.
But - with a trick, Pro and a VBC it works: Create a macrocell "channel" with itself as input on Ch1,2,3 using a VBC - and you already have 72 Hz.
Otherwise - VBar EVO with VBar Control can do it "out of the box".
Honest opinion: Throw out those hopelessly outdated servos.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Direkt beim NEO - nein, da sind 144Hz Default fix.
Aber - mit einem Trick, Pro und einer VBC gehts: Lege an Ch1,2,3 jeweils mit einer VBC eine Makrozelle "Kanal" mit sich selber als Input an - schon hast Du 72 Hz.
Ansonsten - VStabi EVO mit VBar Control kanns "von Haus aus".
Ehrliche Meinung: Schmeiss die hoffnungslos veralteten Servos raus.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Christoph Fuchslueger
13 February 2026 19:2213.02.2026 19:22
Thanks for the info!
I'll try it that way. I don't really want to buy new servos, since I won't be flying the helicopter very often.
Regards, Christoph
Danke für die Info!
Ich werd das mal so versuchen. Ich möchte nicht umbedingt neue Servos kaufen, da ich den Heli ja nicht oft fliegen werde.
Lg Christoph