fabiocoburg
9 June 2026 21:2109.06.2026 21:21
Hello everyone,
I wanted to install my VBar Neo version 6.4 on my PC today.
Unfortunately, it keeps giving me an error code indicating that it cannot run the driver.
It keeps giving me an error message with code 52, stating that the driver's security cannot be verified, and it does not install the USB driver correctly.
Windows Defender and the antivirus program are both turned off.
This error, as seen in the picture, is present on all 3 PCs.
Edited once. Last edited on 09/06/2026 at 21:27 by fabiocoburg.
Hallo zusammen,
ich wollte heute mein V Stabi Neo Version 6.4 mit meinem PC Installieren,
leider bringt er mir immer wieder einen Fehlercode, dass er den Treiber nicht ausführen kann.
Er bringt mir immer eine Fehlermeldung mit Code 52, dass die Sicherheit des Treibers nicht überprüft werden kann und Installiert den USB Treiber nicht richtig.
Windows Defender und Virenprogramm sind aber alle aus.
Diesen Fehler wie in dem Bild sichtbar, ist bei allen 3 PC's vorhanden.
1 mal bearbeitet. Zuletzt am 09.06.2026 21:27 von fabiocoburg.
RV
9 June 2026 23:0509.06.2026 23:05
Yep, that's right, Microsoft has pulled something off that we can't figure out.
Solution: Use a VBar Control; it's more accurate anyway.
Otherwise... VirtualBox with .ova from Uli here:
https://www.vstabi.info/forum/read.php?53,210681,210891#msg-210806
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Jupp, isso, Microsoft hat da was gedreht was wir nicht auflösen können.
Abhilfe: Mit einer VBar Control einstellen, das ist eh genauer.
Ansonsten ... Virtual Box mit .ova von Uli hier:
https://www.vstabi.info/forum/read.php?53,210681,210891#msg-210806
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
fabiocoburg
10 June 2026 15:1210.06.2026 15:12
Good day,
Thank you.
I've already tried that.
Can I switch Windows and the program to German?
Guten Tag,
vielen Dank.
Ich habe das schon probiert.
Kann ich Windows und das Programm auf deutsch umstellen?
Eddi E. aus G.
11 June 2026 08:5411.06.2026 08:54
Good morning,
I don't know about Windows. The programs, yes. Right-click, Properties, and append -l de to the target field.
-l de = German
-l en = English
[nix] = Operating system language, if unknown, English
Greetings
Eddie
Born to fly ...
forced to work.
Moin,
das Windows, weiß ich nicht. Die Programme, ja. Rechte Maus, Eigenschaften, und beim Ziel ein -l de anhängen.
-l de = Deutsch
-l en = Englisch
[nix] = Sprache des Betriebssystems, wenn unbekannt, Englisch
Grüßle
Eddi
Born to fly ...
forced to work.
Teci
11 June 2026 09:5011.06.2026 09:50
Good morning
Windows can be switched to German by installing the German language pack; a little Googling will turn up plenty of instructions, it's not rocket science :-)
VG
Moin
Windows lässt sich per Installation des Deutschen Sprachpaketes umstellen, etwas Googeln Anleitungen dazu gibt es massig ist keine Raketenwissenschaft :-)
VG
Tabaluga
11 June 2026 10:2911.06.2026 10:29
Good day
I spoke with a computer expert today and he said that the problem is only due to a driver signature issue and that this can easily be resolved by the manufacturer.
Why don't you do that and satisfy thousands of customers?
Greetings
Thomas
Guten Tag
ich habe mich heute mal mit einen Computer Experten unterhalten und der meinte das das Problem nur an einer Signierung des Treibers liegt und das vom Hersteller problemlos gemacht werden kann.
Warum macht ihr das nicht und stellt tausende Kunden zufrieden.
Grüße
Thomas
fabiocoburg
11 June 2026 18:4111.06.2026 18:41
Unfortunately, it's not available in German.
The program will remain in English.
Edited once. Last edited on 11/06/2026 at 18:48 by fabiocoburg.
Leider geht es nicht auf Deutsch.
Programm bleibt weiter auf Englisch.
1 mal bearbeitet. Zuletzt am 11.06.2026 18:48 von fabiocoburg.
Eddi E. aus G.
12 June 2026 08:4812.06.2026 08:48
Good morning,
What does your program call look like now, please?
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
wie sieht Dein Programm-Aufruf jetzt aus, bitte?
Grüßle
Eddi
Born to fly ...
forced to work.
Eddi E. aus G.
12 June 2026 11:3512.06.2026 11:35
Good morning,
So, I've now tried it myself on Windows on Windows.
Windows remains in English, but you can change the localization to German (Germany) in the settings wherever, so that you at least have the German keyboard layout etc.
The VBar programs 6.x, 7.x can be changed by adding -l de ((lowercase L for language, language – space – de for German)) in the Target line.
If you wanted to, you could also install VBar Software 5.3 or 4.0; the driver that's already installed is universal.
Incidentally, the whole thing went as described in the other thread
: https://www.vstabi.info/forum/read.php?53,210681,210891#msg-210806 Find, download, and install Oracle VirtualBox.
Download .ova
Import file, appliance, confirm what appears.
Start machine
It starts and runs quickly, just as easy as downloading and installing the actual software, and easier than manually installing the driver afterwards.
— Eddie
Born to fly ...
forced to work.
Edited once. Last edited on June 12, 2026 at 11:36 AM by Eddi E. from G.
Moin,
so, habs jetzt selbst mal Windows auf Windows probiert.
Das Windows bleibt Englisch, man kann aber in den Einstellungen die Lokalisierung auf German (Germany) umstellen wo-immer, so dass man immerhin das Deutsche Tastaturlayout etc. hat.
Die VStabi-Programme 6.x, 7.x kann man mit dem Zusatz -l de ((klein geschriebenes L für language, Sprache – Leerzeichen – de für Deutschisch)) in der Zeile Target (Ziel) umstellen, geht.
Wenn man jetzt wöllte, könnte man auch noch VStabi Software 5.3 oder 4.0 da rein installieren, der Treiber, der sowieso schon installiert ist, ist universell.
Das ganze ging übrigens wie im anderen Tröt
https://www.vstabi.info/forum/read.php?53,210681,210891#msg-210806 beschrieben
. Oracle VirtualBox finden, runterladen, installieren
. .ova runterladen
. Datei, Appliance importieren, bestätigen was kommt
. Maschine starten
zack-zack-zack und startet und läuft flott, genauso einfach wie die eigentliche Software herunter zu laden und zu installieren, und einfacher, als den Treiber noch manuell hinterher zu installieren.
— Eddi
Born to fly ...
forced to work.
1 mal bearbeitet. Zuletzt am 12.06.2026 11:36 von Eddi E. aus G..
fabiocoburg
12 June 2026 13:5812.06.2026 13:58
Good day,
I just spent 50 minutes trying to do it, even with the virtual box.
First, turn on the transmitter, open the program, then plug the USB cable into the PC, power the stabilizer, and then connect it.
Unfortunately, the software does not work on Windows 11 or in virtual box via Oracle.
I'll ask a colleague if it still works with Windows 10.
Could you perhaps re-enable your driver?
GUten Tag,
habe grade 50Minuten versucht, auch mit der virtuellen Box das zu machen.
Erst den Sender eingeschaltet, Programm geöffnet, dann USB Kabel in den PC, Strom auf das Stabi und dann angeschlossen.
Leider geht die Software weder auf windows 11 noch in der virtual box über oracle.
Ich frage einen Kollegen, ob es noch mit Windows 10 geht.
Könnt ihr vielleicht euren Treiber wieder zulassen?
Eddi E. aus G.
12 June 2026 14:3012.06.2026 14:30
Good morning,
I don't understand... troubleshooting:
Does VirtualBox start?
Was the .ova file imported?
Can the virtual machine be started?
Does the VBar software start in it?
If you right-click on the USB icon in the VB status bar at the bottom, does VBar appear there?
If it is not automatically activated (passed through), you can activate it here.
Then, of course, you have to load the key file as usual, for NEO or EVO.
I can't say anything about the driver, it's not my responsibility :-)
Greetings
Eddie
Born to fly ...
forced to work.
Moin,
verstehe ich nicht ... troubleshooting:
. startet VirtualBox?
. wurde die .ova importiert?
. lässt sich die virtuelle Maschine starten?
. startet die VStabi Software darin?
. wenn Du in der Statusleiste der VB unten mit der rechten Maus auf das USB-Symbol klickst, wird dort die VStabi angezeigt?
. wenn sie nicht automatisch aktiviert (durchgereicht) wird, kannst Du sie hier aktivieren
Dann ... muss man natürlich wie sonst auch noch die Schlüsseldatei rein laden, für NEO bzw. EVO.
Wie's mit dem Treiber aussieht kann ich nicht sagen, nicht meine Zuständigkeit :-)
Grüßle
Eddi
Born to fly ...
forced to work.
fabiocoburg
12 June 2026 15:3912.06.2026 15:39
Eddi E. from G. wrote:
-------------------------------------------------------
> Hi,
>
What does your program call look like now, please?
>
> Greetings
>
> Eddie
Hi Eddi,
I tried doing it on Windows by going to the icon, right-clicking, etc., and entering -I de, but unfortunately it doesn't work.
Eddi E. aus G. schrieb:
-------------------------------------------------------
> Moin,
>
> wie sieht Dein Programm-Aufruf jetzt aus, bitte?
>
> Grüßle
>
> Eddi
Hallo Eddi,
ich habe das bei Windows so gemacht, dass ich auf das Icon gehe, rechte Maustaste etc. und -I de eingebe, geht es leider nicht.
fabiocoburg
12 June 2026 15:4212.06.2026 15:42
Hi Eddi,
I'll give it a try.
Hallo Eddi,
ich probiere das mal aus
fabiocoburg
12 June 2026 15:5812.06.2026 15:58
The following error occurs.
Folgender Fehler kommt.
Eddi E. aus G.
12 June 2026 16:0012.06.2026 16:00
Hi,
"USB device 'Mikado VBar NEO' with UUID (21e93c90-26fc-49c4-a944-fba63ed9073a} is busy
with a previous request. Please try again later."
Is anything else running on the host (normal Windows), like VBar software, manager, or anything else?
Grüßle
Eddi
Born to fly ...
forced to work.
Hi,
"USB device 'Mikado VBar NEO' with UUID (21e93c90-26fc-49c4-a944-fba63ed9073a} is busy
with a previous request. Please try again later."
Läuft da auf dem Host (normales Windows) noch irgendwas, VStabi Software, Manager, sonstwas?
Grüßle
Eddi
Born to fly ...
forced to work.
fabiocoburg
12 June 2026 16:0212.06.2026 16:02
Hi Eddi,
It's going now.
But the program is not available in German.
Can we talk on the phone sometime, or could you take a look at it via TeamViewer?
I want to use the Evo!
Hallo Eddi,
geht jetzt,
aber das Programm geht nicht auf deutsch.
können wir mal telefonieren oder kannst du dir das mal per teamviewer ansehen?
Ich will das Evo nutzen!
fabiocoburg
12 June 2026 16:0612.06.2026 16:06
Hi Eddi,
Everything goes smoothly.
But the USB thing was helpful.
Hallo Eddi,
geht alles ohne Probleme,
aber das mit dem USB war hilfreich
Eddi E. aus G.
15 June 2026 08:5815.06.2026 08:58
Super :-)
Born to fly ...
forced to work.
Süper :-)
Born to fly ...
forced to work.
Joern
29 October 2026 12:3429.10.2026 12:34
Hello you two,
I'm a new customer and I have the same problem. Could you please tell me about the USB issue?
It usually works now, but unfortunately often it doesn't. The initial connection in VB is usually difficult.
Thanks & regards
Jörn
Hallo Ihr beiden,
bin "Neukunde" und habe dasselbe Problem. Könntet ihr mir "das mit dem USB" mitteilen ?
Es geht mittlerweile meistens, aber leider auch häufig nicht. Die Erstverbindung in VB ist meist schwierig.
Danke & Grüße
Jörn
Eddi E. aus G.
30 October 2026 09:1030.10.2026 09:10
Hi Jörn,
"The thing with the USB" is difficult to understand without further context :-)
With VB, the automatic pass-through of VBar may not work.
In the footer of the VirtualBox (still below the Windows one in the window), there's a USB stick icon. Click on it, then (with the VirtualBox connected and powered on) select it. If the VirtualBox isn't visible there, the host isn't even recognizing it; then check the connection, cable, etc.
In the VB you can configure "USB Filter" for the VM (connect, add), then the corresponding devices with the same ID etc. will be automatically connected in the future if (x) is checked.
One problem can occur if something on the host is already accessing the device (e.g., in update mode, first USB then power), such as Windows Explorer or VBar Control Manager. In this case, access (here, logging off the host, logging on to the guest) is blocked to prevent any damage.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Jörn,
"das mit dem USB" ist ohne weiteren Kontext schwierig :-)
Bei VB kann es sein, dass die automatische Durchreiche der VStabi nicht greift.
In der Fußzeile der VB (noch unter der von Windows im Window) ist ein USB-Stick-Symbol, da mal drauf klicken, dann (VStabi angeschlossen und bestromt) diese auswählen. Wenn die VStabi dort nicht sichtbar ist, erkennt sie der Host noch nicht mal, dann Anschluss, Kabel etc.
In der VB kann man für die VM "USB Filter" konfigurieren (anschließen, Hinzufügen), dann werden die entsprechenden Geräte mit der selben ID etc. wenn (x) angehakt künftig automatisch verbunden.
Ein Problem kann sein, wenn eben auf dem Host schon was auf das Gerät zugreift (bspw. im Update-Modus, erst USB dann Strom) der Windows Explorer oder VBar Control Manager, dann wird der Zugriff (hier, abmelden am Host, anmelden beim Gast) unterbunden, damit es nix zerschießt.
Grüßle
Eddi
Born to fly ...
forced to work.
Joern
30 October 2026 15:0530.10.2026 15:05
Hi Eddi,
Thanks for your feedback.
The context is the same as described by the thread starter: Mikado Vbar Neo [0200] is busy and therefore not integrated into the VM. Most of the time it works, though, which leads me to conclude that I'm not doing it completely wrong. It often requires unplugging and replugging the USB connection to my laptop. It works somehow, but it's rather inelegant and, in my opinion, not appropriate for an FBL system of this class. I hope this workaround is only temporary.
Best regards
Jörn
Hallo Eddi,
danke für Deine Rückmeldung.
der Kontext ist derselbe, wie vom Threadstarter beschrieben: Mikado Vbar Neo [0200] ist busy und wird daher nicht in die VM eingebunden. Meistens geht es aber, woraus ich schließe, das ich es nicht ganz falsch mache. Es braucht häufig noch ein Entfernen und Wiederanstecken des USB-Anschusses an meinen Laptop. Es geht irgendwie, ist aber recht unschön und aus meiner Sicht einem FBL-System dieser Klasse nicht angemessen. Ich würde mir wünschen, das diese Notlösung nur von kurzer Dauer ist.
Viele Grüße
Jörn
RV
30 October 2026 21:3830.10.2026 21:38
Hi Jörn,
The solution is: Get a VBar Control Touch or EVO. Then you can create better setups, have latency advantages, integrated telemetry, OTA updates, logs, cloud storage, etc. – and you can even fly V8 with a VBar EVO. A PC is a last resort – and we probably won't be changing anything about it.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 30.10.2026 21:39 von RV.
Hallo Jörn,
die Lösung ist: Nimm eine VBar Control touch oder EVO, dann kannst Du z.B. bessere Setups erstellen, hast Latenzvorteile, integrierte Telemetrien, OTA Updates, Logs, Cloud usw. - und auch V8 mit einer VStabi EVO fliegen. PC ist ein Notnagel - und wir werden da vermutlich nichts mehr dran drehen.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 30.10.2026 21:39 von RV.
Joern
1 November 2026 13:1901.11.2026 13:19
Hello Rainer,
Purchasing a Vbar Control Touch makes no sense for me, as I have a large hangar of fixed-wing aircraft in addition to the large helicopters.
I would therefore like to express a heightened interest in well-functioning configuration software that offers access to all parameters and the latest version.
Best regards
Jörn
Hallo Rainer,
die Anschaffung einer Vbar Control Touch macht für mich gar keinen Sinn, da ich neben den großen Helis auch einen größeren Hangar an Flächenfliegern habe.
Ich möchte daher ein verschärftes Interesse an einer gut funktionierenden Einstellsoftware, die Zugriff auf sämtliche Parameter und die neuste Version bietet, anmelden.
Liebe Grüße
Jörn
RV
1 November 2026 17:0001.11.2026 17:00
Well - there are plenty of pilots who have two transmitters, so that's not a problem either.
Okay, we've taken note of it. I'm afraid, though, that nothing more will come of it. Moving away from operating system restrictions was also a point in favor of VBC – and with the latest Windows 11 and macOS updates, it's becoming increasingly clear that this is the better approach for us.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Naja - es gibt genug Piloten die 2 Sender haben, das ist jetzt auch wiederum kein Problem.
Aber gut - wir habens zur Kenntnis genommen. Ich befürchte aber dass sich da nichts mehr tut. Weg von den Restriktionen der Betriebssysteme war auch ein Thema was für die VBC spricht - und bei den letzten W11 und MacOS Updates wirds immer deutlicher dass der Weg für uns der bessere ist.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Joern
1 November 2026 21:4101.11.2026 21:41
Hello Rainer,
Thank you for your honest answer.
Best regards
Jörn
Hallo Rainer,
danke für deine ehrliche Antwort.
Viele Grüße
Jörn