GravityKills
21 November 2009 13:0321.11.2009 13:03
a couple of quarter flips around 0:50. Stops are OK but there is still room for tweaking. Otherwise, nothing special (I'm keeping those videos mostly for myself, so that I can compare later on). Anyway, maybe it's useful.
http://www.youtube.com/watch?v=9h5nb8mIPSI
All over all, it flies pretty well. 4 min flight time + takeoff + landing with the small 3300 x 8s LiPo isn't too bad.
PS I finally managed to measure the rotor diameter below 1000 mm for legal use of the mini V-Bar. But I had to pull hard on the tape measure :-)
2 mal bearbeitet. Zuletzt am 21.11.2009 13:57 von GravityKills.
RV
21 November 2009 18:0921.11.2009 18:09
Quote:But I had to pull hard on the tape measure
:-) :-) :-) :-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G.
21 November 2009 19:5821.11.2009 19:58
Well, we could start using inch tape measures without a scale, just lines and numbers :-)
Where's the MIni for my 1.8 m-BO 105?
Just kiddin' ... respect the recommendation as long as it's not just a few cm.
Cheers
Eddi
Born to fly ...
forced to work.
GravityKills
21 November 2009 21:5821.11.2009 21:58
>> Where's the MIni for my 1.8 m-BO 105?
maybe we're still within specs if you mount 325 mm blades :-)
2 mal bearbeitet. Zuletzt am 21.11.2009 21:58 von GravityKills.
RV
21 November 2009 23:2921.11.2009 23:29
Quote:maybe we're still within specs if you mount 325 mm blades
Ahhh ... you are talking about our tail blades! :-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.