← Flight Trainer

Messed up my FT neo

Mikado Model Helicopters › Flight Trainer · Started by vpe.vinduespolering@gmail.com on 24 November 2023 19:3124.11.2023 19:31
vpe.vinduespolering@gmail.com 24 November 2023 19:3124.11.2023 19:31
Hello so i have bought the logo 200 FT and my 4 years old daughter use it when we are out flying...everything works super...but....i am new to mikado tx ( used spektrum before) and also bought a vbar control evo and tried to bind it to the logo 200 and was a fool and messed everything up so it got updated to a new firmware with pro/ rescue..
Is there anyway i can get the correct firmware back to the vbar neo ?
The vbar control basic that came in the logo 200 kit do not want to bind to the heli anymore.
Really want it back to std. So my daughter can fly it again.

RV 25 November 2023 11:3625.11.2023 11:36
Hello,

from my end - it is the right firmware loaded. There was just a update for it. The naming in VBC seem to be wrong (i will check and fix for next update of VBC) - but it should be the right one.

You can also self-check this when the Trainer/VBar is registered at the Web UI here in your account (Go directly to your devices or scan QR from VBar update manager in VBC). You will see then this App checked which is the right one at the VBar NEO.

When you connect as traienr System and eneble the trainer switch - is there a "OK" status info?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 25.11.2023 11:37 von RV.

vpe.vinduespolering@gmail.com 25 November 2023 14:1525.11.2023 14:15
hello Rainer
Thx...all this mikado stuff is all new to me and tried to connect the vbar basic again and it was just a switch that was in wrong position so now it bind again and everything is good...thx
RV 25 November 2023 16:4925.11.2023 16:49
:-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
VStabi VStabi Pioneer of Flybarless