← Flight Trainer

No/only sporadic control takeover possible in trainer mode translated

Mikado Model Helicopters › Flight Trainer · Started by stephan.ernst@gmx.de on 26 November 2023 11:2626.11.2023 11:26
stephan.ernst@gmx.de 26 November 2023 11:2626.11.2023 11:26
Hello everyone,

My little one refuses to give me control in trainer mode today. That is, I start the system, the Logo goes into a hover at the set altitude and stays there, no matter how often I move the pitch up or down.

Identical behavior on VBar Control Basic as well as on Touch Evo.

Occasionally I manage to gain control, at least with the Basic mode, but very rarely.

What is wrong with the little one? Why won't he let me take control?

Nothing is apparent from the minutes.

Best regards
Stephan

PS: There's a minor bug in the Evo Trainer app; usually, after taking control, the screen gets stuck in the "pitch up" position and doesn't switch to "airplane mode" (or something similar). It's obviously just a display issue.



Edited once. Last edited on 26/11/2023 at 11:26 by stephan.ernst@gmx.de .
machine-translated from German · Show original
RV 26 November 2023 12:0126.11.2023 12:01
Bitte prüfe mal die Knüppelkalibierungen.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
stephan.ernst@gmx.de 26 November 2023 14:5326.11.2023 14:53
Hello Rainer,

The calibrations are all OK and range from -100% to +100%. I also reset the center point for pitch, but it made no difference. When I press the calibration button for pitch, a small window opens showing -1.68% for positive pitch and +1.78% for negative pitch. Perhaps that's the issue?

Something else I should mention – yesterday, while hovering from a low height (70cm), I had a hard landing. I accidentally hit the motor kill switch instead of the landing switch *embarrassed*. It then fell straight down onto a carpet, didn't tip over or hit anything. It just stayed there and rotated to a stop. Could it have something to do with switching it off mid-flight?

Greetings
Stephan
machine-translated from German · Show original
RV 26 November 2023 17:0226.11.2023 17:02
Wenn Du im Pitch Kalibrieren den Knüppel ganz runter machst - und ganz hoch - was steht dann da unten in den %-en?

Eine andere Sache wäre mal zu prüfen ob ggf. einer der Ultraschall Transducer was abbekommen hat.

- alles ein
- Trainerschalter auf aus
- Trainer Info öffnen, man sieht dort die Pegel der Mikrofone
- Mikros sollten alle voll da sein
- Heli am Kopf auf ca. 1m Höhe halten
- Mikros nochmals checken
- Beide Transducer mit je 1 Finger zuhalten
- Level gehen weg
- Nun im Wechsel (!) Finger auf Transducer wegnehmen, so sollte man jeden einzelnen "Volles Rohr" erkennen.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 26.11.2023 17:05 von RV.
stephan.ernst@gmx.de 26 November 2023 18:2926.11.2023 18:29
Hello Rainer,

See pictures for the settings. The transducers are fine, tested as you described, and always show full deflection (in the room, even when they're pointing towards the ceiling, they still show half deflection). The little thing hovers perfectly, nice and stable. That's all it does.

During the hovering phase after takeoff, I also have severely limited control, where it repeatedly returns to the starting point and rotates to 12 o'clock.

Greetings
Stephan

machine-translated from German · Show original
RV 26 November 2023 19:3326.11.2023 19:33
Quote:Im Schwebeflug nach dem Start habe ich auch die stark eingeschränkte Kontrolle, bei der er immer wieder zum Start zurück kehrt und auf 12 Uhr dreht.

Genau. Er erkennt die Pitchfreigabe nicht - deswegen ist das so.

Mir fällt ehrlich gesagt jetzt nicht mehr viel ein - aber lass uns doch mal nachsehen ob das Pitchsignal "trocken" durchkommt.

Mach den Heli und Sender an, stelle den Pitchhebel nach unten, er sollte dann deutlich negativ sein am Kopf. Dann nach oben deutlich Positiv. Dürften (im Setup Mode sieht man es genauer da Regelungen aus) ca. 12° jeweils sein.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
stephan.ernst@gmx.de 26 November 2023 21:0026.11.2023 21:00
Yes, the signal is coming through perfectly, with completely normal movements at the swashplate. Even in setup mode, you can see that the endpoints are being reached.

(Incidentally, I noticed that the pitch on the small one is quite asymmetrically set; I have significantly more negative than positive pitch. But that's just a mechanical issue...)

My problem seems to be more software-related. I did manage to regain control once or twice, for whatever reason.

Last idea: I'll try uninstalling and reinstalling the FT app. If that doesn't help, I'll reset the entire Evo to factory settings. I backed up the Logo 200 setup directly from the box, and I'll restore that before the reset. Not that I changed anything there, but better safe than sorry.

I'm skeptical that it will help, because I have the exact same problem with the Vbar Basic. And I'm not really keen on going through the whole setup process again. But I'm truly at a loss.

Or do you have another idea?

Greetings
Stephan
machine-translated from German · Show original
RV 26 November 2023 22:5226.11.2023 22:52
Hallo Stephan,

der asymmetrische Picth ist - wenn Du im Flugmodus bist - normal. Im Setup ist er eigentlich zur Zeit symmetrisch.

Aber da kann nicht der Grund sein.

Du kannst gerne mal ein neues Setup (Logo 200 Trainer Pre4set laden) machen, danach die TS trimmen (gerade und Nullpitch) und einen Trimflug im Trainer machen. Ich befürchte aber dass das hier damit nicht gelöst sein wird.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
stephan.ernst@gmx.de 27 November 2023 10:4127.11.2023 10:41
Hello Rainer,

That helped, it seems to have actually been related to the TS trim, now I get control without any problems.

How does trim flight work in trainer mode? I've seen the function, but haven't dared to test it because there's no documentation for it in the help section. Does trim flight take place in a mode with reduced agility, meaning I can do it in a fairly large living room, or do I need more space in a hangar or outdoors?

Thank you very much for your help!

Greetings
Stephan



Edited once. Last edited on 27/11/2023 at 10:42 by stephan.ernst@gmx.de .
machine-translated from German · Show original
Eddi E. aus G. 27 November 2023 11:3627.11.2023 11:36
Hi Stephan,

TS-Trimmung, hier eine Besonderheit (weil schon gesehen): obwohl nirgends dokumentiert, haben Kunden da schon 'ver'stellt – bedeutet, bei Knüppel-Mitte sieht man am Heli ja keine 0° Pitch, sonder leicht positiv. Das ist normal und gewollt, das ist einfach Teil der Funktion Leichtigkeit (nach oben verschobenen Pitchkurve, im Flug Sensor-unterstützt). Jetzt gehen 'Experten' her, und trimmen die TS so lange im Setup runter, bis (flugbereit) 0° anstehen, und -zack- stimmt's und geht's nicht/mehr/richtig.
Insbesondere Kunden mit VBar Control Touch/EVO (weil sie's können), weniger mit Basic (weil einfach einfach einfach ist ...).

Der Trimmflug für den Flight-Trainer (und nur da!) geht automatisch: der Heli läuft an, steigt auf etwa 1-1,5 m Höhe, schwebt da bis er fertig ist, landet wieder, das war's. Als ob man im Guided Mode Starten schaltet, wartet, Landen schaltet.

Das geht grundsätzlich auch im Wohnzimmer, wenn man sich auch sonst trauen würde, dort zu fliegen. Ein Restrisiko für Einrichtung und Anwesende besteht natürlich immer und überall dann und dort, wo ein Heli fliegt ... ich will danach keine Beschwerden hören :-)
In einer Halle oder draußen ist i. d. R. weniger 'empfindliches Zeug' :-)

Grüßle

Eddi

Born to fly ...
forced to work.
stephan.ernst@gmx.de 27 November 2023 12:5627.11.2023 12:56
Hi Eddie,

TS is correct, I think. In setup, 0° pitch with the pitch stick centered; in flight mode, approximately 2-3° positive with the pitch stick centered. Thanks for the tip.

The trim flight worked well, and everything in the living room remained intact ;-) .

I'm so happy I'm hooked on RC helicopters again...

Best regards
Stephan
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless