← Logo 700 and 800

Blade Grip Spacers for 14mm mainblades

Mikado Model Helicopters › Logo 700 and 800 · Started by Bugcatcher on 14 September 2016 14:5714.09.2016 14:57
Bugcatcher 14 September 2016 14:5714.09.2016 14:57
Hi,

Can I ask if Mikado will be making blade grip spacers to suit 14mm root mainblades? As in 1.5mm thick.

Although not common, some blades are 14mm root especially night blades.

This would normally not be a big deal but Mikado have once again made strange blade spacer thickness for reasons unknown.

Supplied spacers are 2.5mm thick so you cannot use a combination of 1mm & 2mm spacers that are often supplied with blades.


This was also a problem with the Logo 700 Xxtreme. Blade spacers were 4.75mm thick, which to be honest did not make any sense and made it impossible to use 14mm blades without machining up custom spacers.

Mikado designers should put a little more thought into standardizing things like this. By using 3mm or 2mm spacers, or atleast supply available option parts. This was a problem with supplied Futaba servo plates with Xxtreme as well only suiting the 37kg futaba servos as they had a different sized case.
Eddi E. aus G. 14 September 2016 15:0514.09.2016 15:05
Hi,

you could use one 2 mm and one 1 mm spacer, which would result in a .5 mm offset of the blade center, which should not make a huge difference.

What brand/size of blades are those, or other blades with standard 14 mm blade roots? Please excuse my maybe dumb question, I'm just not aware that they are very common.

Kind regards

Eddi

Born to fly ...
forced to work.
Bugcatcher 14 September 2016 15:2014.09.2016 15:20
Rotortech often use 14mm roots including their F3C blades and night blades, Some SAB do as well.

Edge night blades or as they are now known, 'Switch' blades.

There are others that I can't remember right now but most do use 12mm these days. Other manufacturers usually supply spacers to suit both 12mm and 14mm blades in the kits as standard.

Also, using a combination of 1mm & 2mm having a 0.5mm offset does have an impact on the feel of the blade, I have tried it. Probably not so important if doing the odd night fly now and then but I would not want to have a 0.5mm offset flying all the time.

The Xxtreme 700 is even worse, 4.75mm spacers for total of 9.5mm. Just does not make sense making spacers odd sizes when it is not needed.
Eddi E. aus G. 14 September 2016 16:0314.09.2016 16:03
Yeah, I know. I think it's due to the design, the large thrust bearings require a certain opening of the blade grip, and you still want the right amount of material to take all the load and still be not to chunky (OK, the XX head _is_ chunky :-) ).

I will forward this of course. I think for the XX it's no longer an option, but for the 700 maybe.

Kind regards

Eddi

Born to fly ...
forced to work.
Wolfram 14 September 2016 21:4414.09.2016 21:44
The bladegrips of the 700 xxtreme are with a measure of 21,5 mm really strange.

Why not 22 mm?

Ok, its a old model now.

But for the future it would be nice to avoid such a strange selection.

Gruß, Wolfram
VStabi VStabi Pioneer of Flybarless