Is there a leveling tool for the 14mm main shaft? Been looking
Logo 800
Mikado Model Helicopters › Logo 700 and 800 ·
Started by mav_a@yahoo.com on 17 July 2022 19:0617.07.2022 19:06
mav_a@yahoo.com
17 July 2022 19:0617.07.2022 19:06
RV
17 July 2022 20:2317.07.2022 20:23
Not needed. There is a way more simple method:
Just use a long screwdriver, let it hang through the main blade screw holes on the blade grip.
Then - start at one position (e.g. over tail) and adjust as long as needed to be in a line with main shaft.
Turn to another servo ball link point (left front) - do the same - and on the 3rd one also.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Just use a long screwdriver, let it hang through the main blade screw holes on the blade grip.
Then - start at one position (e.g. over tail) and adjust as long as needed to be in a line with main shaft.
Turn to another servo ball link point (left front) - do the same - and on the 3rd one also.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.