maurice.krause
9 May 2025 16:4309.05.2025 16:43
Hi everyone,
Since I now regret one or two things in the configuration of my first Logo 700...
My question is whether this is a competition-ready setup?
Answers from team pilots are also welcome.
New Logo 700
Hobbywing 260A Platinium Pro SBEC 12V
Scorpion HK5-5024-535kv
HLS Combo 12V KST Servo
Vstabi EVO Express 8.x
Vstabi EVO Pro Version
Power Backup Vstabi
Greetings
Maurice
Moin zusammen,
da ich bei meinem ersten Logo 700 in der Konfiguration das ein oder andere bereue inzwischen...
Ist nun hier meine Frage ob dies hier ein Wettbewerbtaugliches Setup ist?
Gerne auch Antworten von Team-Piloten.
New Logo 700
Hobbywing 260A Platinium Pro SBEC 12V
Scorpion HK5-5024-535kv
HLS Combo 12V KST Servo
Vstabi EVO Express 8.x
Vstabi EVO Pro Version
Power Backup Vstabi
Grüße
Maurice
florian_neuner
29 May 2025 10:1329.05.2025 10:13
Hi Maurice,
That sounds good!
I can't personally say anything about the engine, but to my knowledge Marik and Mariano also fly it.
I fly the 4525 xNova, which is significantly lighter.
I use this controller myself in my competition setup and I'm completely satisfied.
I have the 12V HLS from KST in my test helicopter, and they work perfectly. As far as I know, Carl also uses them in his competition setups.
So I don't think there's anything wrong with that :-)
LG Flo
Edited once. Last edited on 29.05.2025 at 10:21 by florian_neuner.
Hi Maurice,
das hört sich doch gut an!
Zu dem Motor kann ich persönlich nichts sagen, aber meines Wissens nach fliegen den auch Marik und Mariano.
Ich flieg den 4525er xNova, der ist nochmal ein gutes Stück leichter.
Den Regler flieg ich selbst in meinem Competition Setup und bin voll zufrieden.
Die 12v HLS von KST hab ich in meinem Test Heli, da laufen die auch Top. Die fliegt so weit ich weiß auch Carl in seinen Competition Setups.
Also glaub da gibts nichts dagegen einzuwenden :-)
LG Flo
1 mal bearbeitet. Zuletzt am 29.05.2025 10:21 von florian_neuner.
maurice.krause
29 May 2025 12:1029.05.2025 12:10
Hi Flo,
Thanks for the reply, yes, some time has passed, I'm currently flying my 700 with the Xnova 4525-560KV, absolutely awesome piece of kit, at the moment I'm just missing a 14-tooth pinion gear.
Greetings
Maurice
Hi Flo,
danke für die Antwort, ja es ist ja ein bisschen Zeit vergangen, fliege aktuell in meinem 700er jetzt den Xnova 4525-560KV, absolut geiles Teil, im Moment fehlt mir nur ein 14er Ritzel.
Grüße
Maurice
florian_neuner
29 May 2025 13:2529.05.2025 13:25
Hi Maurice,
With the 560kv motor, a 14-tooth pinion would be a bit overkill. I use the 14-tooth pinion on my 530kv motor, which works perfectly for me so the whole drivetrain runs efficiently (it does drop off a bit with older batteries, but I'm happy to accept that to reduce the peak currents).
What RPM are you flying at?
LG Flo
Hi Maurice,
mit dem 560kv wäre das 14er Ritzel aber auch ein wenig overkill. Ich fliege am 530er das 14er, das passt für mich perfekt damit der ganze antriebsstrang schön effizient läuft (bricht zwar mit alten akkus ein wenig ein, aber das nehm ich gern in kauf um die spitzenströme ein wenig zu senken).
Welche Drehzahl fliegst du denn?
LG Flo
maurice.krause
29 May 2025 13:4929.05.2025 13:49
Hi Flo,
I usually fly at around 2060-2100 RPM, depending on the batteries I'm using. My "best" batteries are 5100mAh 55C. Could these be the bottleneck? I often experience dips in power at 2100 RPM.
Greetings
Maurice
Hi Flo,
ich fliege 2060-2100 so in dem Bereich, je nachdem welche Akkus ich drin hab, meine "besten" Akkus haben 5100mah 55C sind diese eventuell der Flaschenhals? Hab bei 2100 umdrehung oft einbrüche.
Grüße
Maurice
HeliALEX
29 May 2025 23:4629.05.2025 23:46
Hello Maurice,
What exactly is shown in the flight summary at the end?
Is the controller often/permanently set to 100%?
Regarding the first post: we also fly the HK5 5024-535 with a 14-tooth pinion, 2200 RPM and without any dips in performance. Did you perhaps have the 13-tooth pinion installed on that motor?
A 4525 motor generally has significantly less torque compared to the HK5-5024; if you put the 14-inch propeller on a 560KV motor (quite high in the 700 series), the temperature and your current peaks will increase significantly.
Hallo Maurice,
was ist denn in der Zusammenfassung vom Flug am Ende zu sehen?
Ist der Regler oft/ dauerhaft auf 100%?
Zu dem 1. Beitrag: wie fliegen den HK5 5024-535 auch, mit 14er Ritzel, 2200RPM und ohne Einbrüche, hattest du bei dem Motor eventuell das 13er verbaut?
Ein 4525 Motor hat generell deutlich weniger Drehmoment im vergleich zum HK5-5024, wenn du bei 560KV (recht hoch im 700er) das 14er draufmachst steigt die Temperatur und deine Stromspitzen deutlich an.
maurice.krause
30 May 2025 08:3730.05.2025 08:37
Hi HeliALEX,
Thanks for the reply, I then continued writing with Flo on Instagram, the solution was actually quite simple, readjusted the base throttle, adjusted the throttle distance from the controller and lo and behold, no more RPM drops.
Greetings
Maurice
Hi HeliALEX,
danke für die Antwort, ich hab dann mit Flo auf Instagram weiter geschrieben, die Lösung war dann doch eigentlich ganz simpel, Basisgas neu eingestellt, Gas Weg vom Regler eingestellt und siehe da, keine Drehzahleinbrüche mehr.
Grüße
Maurice