Can we ordre spare parts for the Logo 700 V2, plus extra battery tray?
Logo 700 V2
Mikado Model Helicopters › Logo 700 and 800 ·
Started by steffgiguere on 19 September 2026 20:3419.09.2026 20:34
steffgiguere
19 September 2026 20:3419.09.2026 20:34
Eddi E. aus G.
21 September 2026 08:5321.09.2026 08:53
Hi,
unfortunately, the parts are still not online.
Please compile a list of what you need and send it to service (at) vstabi (dot) info, and we will see to it.
Kind regards
Eddi
Born to fly ...
forced to work.
unfortunately, the parts are still not online.
Please compile a list of what you need and send it to service (at) vstabi (dot) info, and we will see to it.
Kind regards
Eddi
Born to fly ...
forced to work.
flydown
18 October 2026 14:1918.10.2026 14:19
Hello,
What is the maximum permissible size for the battery?
If I could afford an L700, it would get a
8s setup. And my SLS Speed 5100 battery is quite thick.
Greetings, Uwe
What is the maximum permissible size for the battery?
If I could afford an L700, it would get a
8s setup. And my SLS Speed 5100 battery is quite thick.
Greetings, Uwe
Hallo,
wie groß darf der Akku maximal sein?
Würde ich mir einen L700 gönnen können, bekäme er ein
8s Setup. Und mein Akku aus SLS Speed 5100 ist ziemlich dick.
Grüße Uwe
wie groß darf der Akku maximal sein?
Würde ich mir einen L700 gönnen können, bekäme er ein
8s Setup. Und mein Akku aus SLS Speed 5100 ist ziemlich dick.
Grüße Uwe
machine-translated from German · Show original
Eddi E. aus G.
19 October 2026 08:5819.10.2026 08:58
Hi Uwe,
The battery compartment is quite gigantic, but also asymmetrical (in width).
According to this internet, two 4s would be stacked or even fit lengthwise – I think – but you also have to consider the center of gravity.
With 8s, the motor kv would also be an issue, or it generally comes down to comparatively lower speeds, probably 1300-1400 max.
Grüßle
Eddi
Born to fly ...
forced to work.
The battery compartment is quite gigantic, but also asymmetrical (in width).
According to this internet, two 4s would be stacked or even fit lengthwise – I think – but you also have to consider the center of gravity.
With 8s, the motor kv would also be an issue, or it generally comes down to comparatively lower speeds, probably 1300-1400 max.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Uwe,
Der Akku-Schacht ist ziemlich gigantisch, aber auch asymmetrisch (in der Breite).
Diesem Internet nach würden 2 4s davon gestapelt oder sogar der Länge – denke ich – nach passen, muss man halt auch wegen dem Schwerpunkt schauen.
Bei 8s wäre dann noch die Motor-kv ein Thema, oder es läuft generell auf vergleichsweise niedrigere Drehzahlen raus, vermutlich 1.300-1.400 max.
Grüßle
Eddi
Born to fly ...
forced to work.
Der Akku-Schacht ist ziemlich gigantisch, aber auch asymmetrisch (in der Breite).
Diesem Internet nach würden 2 4s davon gestapelt oder sogar der Länge – denke ich – nach passen, muss man halt auch wegen dem Schwerpunkt schauen.
Bei 8s wäre dann noch die Motor-kv ein Thema, oder es läuft generell auf vergleichsweise niedrigere Drehzahlen raus, vermutlich 1.300-1.400 max.
Grüßle
Eddi
Born to fly ...
forced to work.
machine-translated from German · Show original
flydown
19 October 2026 12:1219.10.2026 12:12
Hello,
I just measured the battery; it's 71mm wide. Or tall. So if that's too much, that would be a shame.
I'd use a 711kv motor, which should work well with the 13-tooth pinion. I just need to find the 8/6mm motor shaft I bought years ago and successfully hid.
Currently, an 8mm blade bearing shaft is installed, but as far as I know, it doesn't fit into the Logo pinion gears.
Let's see.
Thanks, Uwe
I just measured the battery; it's 71mm wide. Or tall. So if that's too much, that would be a shame.
I'd use a 711kv motor, which should work well with the 13-tooth pinion. I just need to find the 8/6mm motor shaft I bought years ago and successfully hid.
Currently, an 8mm blade bearing shaft is installed, but as far as I know, it doesn't fit into the Logo pinion gears.
Let's see.
Thanks, Uwe
Hallo,
habe gerade den Akku mal gemessen, 71mm breit. Oder hoch. Also wenn das zuviel wäre, wäre das schade.
Als Motor käme ein 711kv zum werkeln, mit dem 13er Ritzel sollte das gut passen. Ich müßte nur die 8/6mm Motorwelle wiederfinden, die ich vor Jahren mal gekauft und erfolgreich versteckt habe.
Aktuell ist eine 8mm Blattlagerwelle verbaut, aber die paßt mWn nicht in die Logo Ritzel.
Na mal gucken.
Danke, Uwe
habe gerade den Akku mal gemessen, 71mm breit. Oder hoch. Also wenn das zuviel wäre, wäre das schade.
Als Motor käme ein 711kv zum werkeln, mit dem 13er Ritzel sollte das gut passen. Ich müßte nur die 8/6mm Motorwelle wiederfinden, die ich vor Jahren mal gekauft und erfolgreich versteckt habe.
Aktuell ist eine 8mm Blattlagerwelle verbaut, aber die paßt mWn nicht in die Logo Ritzel.
Na mal gucken.
Danke, Uwe
machine-translated from German · Show original
ian Spencer
19 October 2026 15:1119.10.2026 15:11
The battery tray is the same as the original Logo 700.
Eddi E. aus G.
19 October 2026 15:3919.10.2026 15:39
Hi,
So, from SLS's website, for the 7s:
Dimension: approx. LxWxH 164x53x64mm
With an 8s battery, the dimensions would probably be 164x53x73 mm (LxWxH).
But when I look at the measurements in the overview there, there must be a mistake somewhere ;-)
Therefore, it's better to measure accurately yourself.
That would fit, though: the clear width in the area of the battery rail is about 60 mm, the height is not a problem, nor is the depth (length).
Grüßle
Eddi
Born to fly ...
forced to work.
So, from SLS's website, for the 7s:
Dimension: approx. LxWxH 164x53x64mm
With an 8s battery, the dimensions would probably be 164x53x73 mm (LxWxH).
But when I look at the measurements in the overview there, there must be a mistake somewhere ;-)
Therefore, it's better to measure accurately yourself.
That would fit, though: the clear width in the area of the battery rail is about 60 mm, the height is not a problem, nor is the depth (length).
Grüßle
Eddi
Born to fly ...
forced to work.
Hi,
aalso, von SLS' Indernett-Seite, für den 7s:
Dimension: approx. LxWxH 164x53x64mm
Wären dann bei 8s vermutlich LxWxH 164x53x73mm.
Aber wenn ich die Maßangaben in der Übersicht dort anschaue, muss da irgendwo ein Klops drin sein ;-)
deswegen besser selbst genau messen.
Würde so aber passen-tun: die lichte Weite im Bereich der Akkuschiene ist etwa 60 mm, die Höhe ist kein Problem, die Tiefe (Länge) auch nicht.
Grüßle
Eddi
Born to fly ...
forced to work.
aalso, von SLS' Indernett-Seite, für den 7s:
Dimension: approx. LxWxH 164x53x64mm
Wären dann bei 8s vermutlich LxWxH 164x53x73mm.
Aber wenn ich die Maßangaben in der Übersicht dort anschaue, muss da irgendwo ein Klops drin sein ;-)
deswegen besser selbst genau messen.
Würde so aber passen-tun: die lichte Weite im Bereich der Akkuschiene ist etwa 60 mm, die Höhe ist kein Problem, die Tiefe (Länge) auch nicht.
Grüßle
Eddi
Born to fly ...
forced to work.
machine-translated from German · Show original